ccid_1.4.7-1~bpo60+1_i386.changes is NEW
(new) ccid_1.4.7-1~bpo60+1.debian.tar.gz extra libs
(new) ccid_1.4.7-1~bpo60+1.dsc extra libs
(new) ccid_1.4.7.orig.tar.bz2 extra libs
(new) libccid_1.4.7-1~bpo60+1_i386.deb extra libs
PC/SC driver for USB CCID smart card readers
This library provides a PC/SC IFD handler implementation for the USB smart
card drivers compliant to the CCID protocol.
.
This package is needed to communicate with the CCID smartcard readers through
the PC/SC Lite resource manager (pcscd).
.
For an exhaustive list of supported reader see
http://pcsclite.alioth.debian.org/section.html
.
This driver also supports the GemPC Twin connected to a serial port and
the GemPC Card (PCMCIA, through the suggested pcmciautils package) and
Gemplus GemPC Express (Express54 card).
Changes:
ccid (1.4.7-1~bpo60+1) squeeze-backports; urgency=low
.
* Rebuild for squeeze-backports.
.
ccid (1.4.7-1) unstable; urgency=low
.
* New upstream release
* debian/control: remove autotools-dev from Build-Depends: It is no more
needed since a long time now.
.
ccid (1.4.6-2) unstable; urgency=low
.
* use debhelper version 9 to get automatic hardening
.
ccid (1.4.6-1) unstable; urgency=low
.
* New upstream release
* debian/control: Standards-Version: 3.9.2 -> 3.9.3. No change needed.
.
ccid (1.4.5-1) unstable; urgency=low
.
* New upstream release
.
ccid (1.4.4-1) unstable; urgency=low
.
* New upstream release
* debian/control: Standards-Version: 3.9.1 -> 3.9.2. No change needed.
.
ccid (1.4.3-1) unstable; urgency=low
.
* New upstream release
.
ccid (1.4.2-2) unstable; urgency=low
.
* Fix "circular dependency with pcscd and libpcsclite1" remove binaries
Kobil_mIDentity_switch and RSA_SecurID_getpasswd so the package do not
depends on libpcsclite1 (Closes: #612972)
.
ccid (1.4.2-1) unstable; urgency=low
.
* New upstream release
* Fix "New Neowave Weneo card version with new productId" support is now
included upstream (Closes: #570167)
.
ccid (1.4.1-1) experimental; urgency=low
.
* New upstream release
* debian/control: Build-Depends: libpcsclite-dev (>= 1.6.5~). It is needed
by the new upstream version.
* debian/libccid.udev: install the udev rule at priority 92 to be _after_
91-permissions.rules
.
ccid (1.4.0-1) experimental; urgency=low
.
* New upstream release
* debian/rules: use dh (nearly) minimal rules
* debian/control: remove reader list since it is no more up to date
* debian/post{inst,rm}: removed. No need to call update-reader.conf any
more since pcscd will parse the /etc/reader.conf.d/ directory
* debian/control: remove references to pcscd 1.2.9-beta9-1 in Recommands and
Conflicts since stable already have pcscd 1.4.102
* debian/control: Standards-Version: 3.8.4 -> 3.9.1. No changes needed.
* debian/control: Build-Depends: libusb-1.0-0-dev instead of libusb-dev
.
ccid (1.3.13-1) experimental; urgency=low
.
* New upstream release
.
ccid (1.3.12-1) experimental; urgency=low
.
* New upstream release
* debian/control: Build-Depends: libpcsclite-dev (>= 1.6.0) instead of
libpcsclite-dev (>= 1.3.3)
* debian/control: Standards-Version: 3.8.2 -> 3.8.4. No change needed
* upgrade to debhelper v7
* debian/source/format: use "3.0 (quilt)" format
* Fix "Lots of logging with no card in SCM SCR3310" fixed upstream
(Closes: #555837)
* Fix "USB-ICC version A (T=0) support" Better support if ICCD-A included
upstream (Closes: #503638)
Override entries for your package:
Announcing to debian-backports-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: