firmware-nonfree_0.35~bpo60+1_i386.changes is NEW
firmware-atheros_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-atheros_0.35~bpo60+1_all.deb
firmware-bnx2_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-bnx2_0.35~bpo60+1_all.deb
firmware-bnx2x_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-bnx2x_0.35~bpo60+1_all.deb
firmware-brcm80211_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-brcm80211_0.35~bpo60+1_all.deb
firmware-intelwimax_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-intelwimax_0.35~bpo60+1_all.deb
firmware-ipw2x00_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-ipw2x00_0.35~bpo60+1_all.deb
firmware-ivtv_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-ivtv_0.35~bpo60+1_all.deb
firmware-iwlwifi_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-iwlwifi_0.35~bpo60+1_all.deb
(new) firmware-libertas_0.35~bpo60+1_all.deb optional non-free/kernel
Binary firmware for Marvell Libertas 8xxx wireless cards
This package contains the binary firmware for wireless network cards with
Marvell Libertas 8xxx chips supported by the libertas_cs, libertas_sdio,
libertas_spi, libertas_tf_usb, mwl8k and usb8xxx drivers.
.
Contents:
* USB8388 'Thinfirm' firmware (lbtf_usb.bin)
* CF8381 main code (libertas/cf8381.bin)
* CF8381 boot code (libertas/cf8381_helper.bin)
* CF8385 main code (libertas/cf8385.bin, libertas_cs.fw)
* CF8385 boot code (libertas/cf8385_helper.bin, libertas_cs_helper.fw)
* GSPI8686 main code, version 9.x (libertas/gspi8686_v9.bin)
* GSPI8686 boot code, version 9.x (libertas/gspi8686_v9_helper.bin)
* GSPI8688 main code (libertas/gspi8688.bin)
* GSPI8688 boot code (libertas/gspi8688_helper.bin)
* SD8385 main code (libertas/sd8385.bin, sd8385.bin)
* SD8385 boot code (libertas/sd8385_helper.bin, sd8385_helper.bin)
* SD8686 main code, version 8.x (libertas/sd8686_v8.bin, sd8686.bin)
* SD8686 boot code, version 8.x (libertas/sd8686_v8_helper.bin, sd8686_helper.bin)
* SD8686 main code, version 9.x (libertas/sd8686_v9.bin)
* SD8686 boot code, version 9.x (libertas/sd8686_v9_helper.bin)
* SD8688 main code (libertas/sd8688.bin, sd8688.bin)
* SD8688 boot code (libertas/sd8688_helper.bin, sd8688_helper.bin)
* USB8388 OLPC firmware, version 5.110.22.p23 (libertas/usb8388_olpc.bin)
* USB8388 firmware, version 5.x (libertas/usb8388_v5.bin, usb8388.bin)
* USB8388 firmware, version 9.x (libertas/usb8388_v9.bin)
* USB8682 firmware (libertas/usb8682.bin)
* MWL8366 main code (mwl8k/fmimage_8366.fw)
* MWL8366 AP-mode main code (mwl8k/fmimage_8366_ap-2.fw)
* MWL8687 main code (mwl8k/fmimage_8687.fw)
* MWL8366 boot code (mwl8k/helper_8366.fw)
* MWL8687 boot code (mwl8k/helper_8687.fw)
firmware-linux-nonfree_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-linux-nonfree_0.35~bpo60+1_all.deb
firmware-linux_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-linux_0.35~bpo60+1_all.deb
firmware-myricom_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-myricom_0.35~bpo60+1_all.deb
firmware-netxen_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-netxen_0.35~bpo60+1_all.deb
firmware-nonfree_0.35~bpo60+1.dsc
to non-free/f/firmware-nonfree/firmware-nonfree_0.35~bpo60+1.dsc
firmware-nonfree_0.35~bpo60+1.tar.gz
to non-free/f/firmware-nonfree/firmware-nonfree_0.35~bpo60+1.tar.gz
firmware-qlogic_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-qlogic_0.35~bpo60+1_all.deb
firmware-ralink_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-ralink_0.35~bpo60+1_all.deb
firmware-realtek_0.35~bpo60+1_all.deb
to non-free/f/firmware-nonfree/firmware-realtek_0.35~bpo60+1_all.deb
Changes: firmware-nonfree (0.35~bpo60+1) squeeze-backports; urgency=low
.
* Rebuild for squeeze
.
firmware-nonfree (0.35) unstable; urgency=low
.
* Add version to firmware-libertas's conflict with libertas-firmware so
it can coexist with the current transitional package
* Add Realtek RTL8168F firmware for use with r8169 driver
* Update Realtek RTL8168E-3 firmware to version 0.0.3
* Replace Broadcom NetXtreme II 10Gb firmware version 6.2.9.0
(for Linux 3.0) with version 7.0.29.0 (for Linux 3.2)
* Update to linux-support-3.2.0-1
.
firmware-nonfree (0.34) unstable; urgency=low
.
[ Ben Hutchings ]
* Add Marvell Libertas 8xxx firmware, replacing libertas-firmware package
(Closes: #609856)
* Set the upstream homepage URL to the current gitweb page for
linux-firmware.git (except for ipw2x00, ivtv and qlogic packages)
* Replace Broadcom NetXtreme II 10Gb firmware versions 6.0.34.0
(for Linux 2.6.37) and 7.0.20.0 with versions 6.2.9.0 and 7.0.23.0
(for Linux 3.0 and 3.1)
* Update Chelsio T4 firmware to version 1.3.10.0
* Update Intel Wireless 6005 firmware to version 17.168.5.3 (Closes: #632701)
- Add "low temperature" support
* Update Realtek RTL8192SU/RTL8712U firmware to match vendor driver
version 2.6.6
* Add Realtek RTL8192DE firmware for use with rtl8192de driver
* Update Atheros AR3012 firmware
- Keep the same vendor and product ID after firmware is loaded
.
[ dann frazier ]
* Update netxen firmware to 4.0.579
.
firmware-nonfree (0.33) unstable; urgency=low
.
* Update to linux-support-3.0.0-1
* Add Atheros AR3012 firmware for use with ath3k
Override entries for your package:
firmware-atheros_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-bnx2_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-bnx2x_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-brcm80211_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-intelwimax_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-ipw2x00_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-ivtv_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-iwlwifi_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-linux-nonfree_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-linux_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-myricom_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-netxen_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-nonfree_0.35~bpo60+1.dsc - source non-free/kernel
firmware-qlogic_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-ralink_0.35~bpo60+1_all.deb - optional non-free/kernel
firmware-realtek_0.35~bpo60+1_all.deb - optional non-free/kernel
Announcing to debian-backports-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
ngs above
if files already exist in other distributions.
Reply to: