usb-modeswitch_1.1.7-1~bpo60+1_amd64.changes is NEW
(new) usb-modeswitch_1.1.7-1~bpo60+1.debian.tar.gz extra comm
(new) usb-modeswitch_1.1.7-1~bpo60+1.dsc extra comm
(new) usb-modeswitch_1.1.7-1~bpo60+1_amd64.deb extra comm
mode switching tool for controlling "flip flop" USB devices
Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the binaries and the brother scripts.
(new) usb-modeswitch_1.1.7.orig.tar.bz2 extra comm
Changes: usb-modeswitch (1.1.7-1~bpo60+1) squeeze-backports; urgency=low
.
* Rebuild for squeeze-backports.
.
usb-modeswitch (1.1.7-1) unstable; urgency=low
.
* New 1.1.7 upstream version.
.
* Patches:
+ Add 01_extract_to_var_lib_not_tmp.patch to extract
temporary files to /var/lib/usb_modeswitch instead of /tmp.
+ Add 02_allow_override_from_etc.patch to permit overriding
packed configurations with files within /etc/usb_modeswitch.d/.
- Remove 02_mp_correct_hyphens.patch: merged upstream.
- Remove 04__use_var_lib_not_etc.patch: merged upstream.
- Remove 05_fixed_configuration_switching_races.patch: was an upstream
backport.
- Remove 06_umdp_archive_in_usr.patch: Obsoleted by upstream.
* Replace usb-modeswitch-data-packed dependency by a versioned dependency on
usb-modeswitch-data (copes with -packed package removal).
* Add a postinst maintainer script to move past runtime files to their new
(and correct) location under /var/lib/.
* Also bump debhelper compat (was forgotten).
.
usb-modeswitch (1.1.6-2) unstable; urgency=low
.
* Upload to unstable.
* Use new dh_installdeb maintscript possibility:
- Bump debhelper Build-Depends to 8.1.0.
- Add Pre-Depends on ${misc:Pre-Depends} to usb-modeswitch.
- Remove usb-modeswitch.preinst.
- Add usb-modeswitch.maintscript.
* Use my @d.o address and remove the DMUA flag.
.
usb-modeswitch (1.1.6-1) experimental; urgency=low
.
* New 1.1.6 upstream version.
.
* Add a prerm maintainer script to remove leftover runtime files.
* Update package relationships to allow the install of usb-modeswitch-
data-packed.
* Patches:
+ 06_umdp_archive_in_usr.patch: Add to search for the compressed archive
in /usr/share/usb-modeswitch-data/
x Refresh all others.
* Bump Standards to 3.9.1 without changes needed.
.
usb-modeswitch (1.1.5-1) experimental; urgency=low
.
* New 1.1.5 upstream version.
.
* Patches:
- 01_no_bash_before_tcl.patch: remove, included upstream.
x Refresh all others.
Override entries for your package:
Announcing to debian-backports-changes@lists.debian.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
Reply to: