Accepted xz-utils 5.0.0-2~bpo50+1 (source all amd64)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA384
Format: 1.8
Date: Sat, 04 Dec 2010 21:00:39 +0000
Source: xz-utils
Binary: liblzma2 xz-utils xz-lzma xzdec liblzma-dev liblzma-doc
Architecture: source amd64 all
Version: 5.0.0-2~bpo50+1
Distribution: lenny-backports
Urgency: low
Maintainer: Thorsten Glaser <tg@mirbsd.de>
Changed-By: Thorsten Glaser <tg@mirbsd.de>
Description:
liblzma-dev - XZ-format compression library - development files
liblzma-doc - XZ-format compression library - API documentation
liblzma2 - XZ-format compression library
xz-lzma - XZ-format compression utilities - compatibility commands
xz-utils - XZ-format compression utilities
xzdec - XZ-format compression utilities - tiny decompressors
Closes: 518803 540232 540443 540444 540543 541391 541540 542060 543562 544872 550249 553331 571060 572481 574583 578465 592298
Changes:
xz-utils (5.0.0-2~bpo50+1) lenny-backports; urgency=low
.
* Rebuild for lenny-backports.
* Drop changes from previous lenny-backports uploads that
are either integrated in the packaging (dependencies) or
no longer necessary (switch source format to 1.0). Kept:
* debian/control: Add myself to Uploaders for the backport.
* debian/control: Replace Breaks with Conflicts for lenny.
.
xz-utils (5.0.0-2) unstable; urgency=low
.
* Upload to unstable.
* liblzma2, liblzma-dev, xz-lzma: Install release notes.
* debian/symbols: Bump the minimal versions for lzma_index_encoder,
lzma_index_decoder to the version in which they gained LZMA_FINISH
support.
* xz-utils/README.Debian: Document differences from upstream ABI.
* debian/changelog.upstream.sh: Avoid empty changelog entries when
multiple Debian revisions match an upstream tag.
.
xz-utils (5.0.0-1) experimental; urgency=low
.
* Upload to experimental.
* New stable upstream release. Closes: #592298.
- xz avoids SA_RESTART. This should not have a visible effect
because xz already blocked signals during operations that
would be difficult to resume after interruption.
- liblzma: The coders returned by lzma_index_encoder() and
lzma_index_decoder() support an LZMA_FINISH action, with
identical semantics to LZMA_RUN.
- The printable (PDF and PS) versions of the manual are easier
to read.
- Many documentation and build system cleanups.
* liblzma: Back out upstream ABI tweaks.
* liblzma/README.Debian: Document ABI differences from upstream.
* Copy sample code not included in the release tarball from
the development upstream repository to debian/examples.
* debian/rules clean: Remove some files not included in the
release tarball.
* copyright: List new INSTALL.generic license.
* debian/rules clean: Take new build-aux scripts into account.
* debian/rules: Adapt for upstream build system changes.
Closes: #540443.
* xz-utils, xzdec: Install release notes.
.
xz-utils (4.999.9beta+20100927-1) experimental; urgency=low
.
* New snapshot, taken from upstream commit cec0ddc.
- liblzma: The meaning of --extreme has been tweaked to address
cases in which it made the compression ratio worse. Some files
might benefit slightly less from --extreme.
- xz: Table columns are not misaligned any more in messages with
multi-byte characters (e.g., file sizes with LANG=fi_FI.UTF-8).
- xz: New German and Italian translations.
- Various documentation, message, and translation updates.
* Update copyright file.
* debian/rules get-orig-source: Update upstream Git URL.
* xz-utils/README.Debian: Advertise XZ_DEFAULTS.
.
xz-utils (4.999.9beta+20100903-1) experimental; urgency=low
.
* New snapshot, taken from upstream commit 373ee26.
- liblzma: The settings for compression levels 0 through 5
(used by xz -0/.../-5) have been tweaked. This affects the
speed, compression ratio, and memory usage at compression and
decompression time.
- Does not search so hard for a match when a low "nice match
length" setting is specified without a depth.
- xz: The -1/.../-9 preset options override any previously
specified filters, rather than vice versa. To mix presets
with filter options, use the --lzma2=preset=n option.
- xz: Warns about --memlimit-compress settings that result in
compression settings changing even if no explicit -1/.../-9,
--lzma1, or --lzma2 option was used.
- "xz -v -v --compress" now prints an estimate of the memory
required to decompress a file.
* debian/copyright: Update upstream Git URL.
* debian/changelog.upstream.sh: Permit terser changelog lines.
* Standards-Version: 3.9.1 (checked).
.
xz-utils (4.999.9beta+20100810-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit d5653ba8a.
- xz: The memory usage limiter is now disabled by default.
- xz: Support for an XZ_DEFAULTS environment variable was added.
It contains user-specific default settings, such as memory usage
limits, and can be overridden by the command line and XZ_OPT.
- xz: The new --memlimit-compress and --memlimit-decompress
options allow the memory usage limit to be set separately for
compression and decompression. A new --memlimit alias has been
added for the existing --memory option.
- xz: The --info-memory option (with or without --robot) now prints
how much RAM is installed in addition to the compression and
decompression memory limits.
* liblzma-doc: Simplify package description.
* debian/control: Build-Depends: autopoint | gettext (<< 0.18-1),
autopoint | cvs instead of autopoint, to help with backporting.
Thanks to Thorsten Glaser for a report.
.
xz-utils (4.999.9beta+20100713-1) unstable; urgency=low
.
[ Thorsten Glaser ]
* Explicitly depend on autoconf (>= 2.64~) due to AC_PREREQ,
discovered during backporting.
.
[ Jonathan Nieder ]
* Upload to unstable.
* New upstream snapshot, taken from upstream commit a540198f.
- xz: The new --no-adjust option can be used to error out if there
is insufficient memory for the chosen compression level.
* liblzma-dev: Install examples to /usr/share/doc/liblzma-dev.
* Update copyright file.
.
* Drop unpack-time conflicts in favor of configuration-time
conflicts (Replaces + Breaks):
- xz-utils: against old xz-lzma (for lzmainfo).
- xzdec: against old xz-lzma (for lzmadec).
- xz-lzma: against lzip 1.7 (for lzdiff and lzgrep).
* Standards-Version: 3.9.0.
.
* debian/autogen.sh: Don’t regenerate upstream changelog when it is
not out of date.
* debian/rules get-orig-source: Use gzip --no-name --rsyncable.
.
xz-utils (4.999.9beta+20100602-1) experimental; urgency=low
.
* New upstream snapshot, taken from upstream commit d8b41eed.
- The output from "xz -v --list" and "xz -v -v --list" has been
improved.
"xz -v -v --list" can be used to obtain an estimate for the memory
required to decompress a file.
- The xz manual page has some new material, including examples.
Closes: #578465.
- liblzma: The lzma_block_compressed_size() function no longer
returns LZMA_DATA_ERROR for valid Blocks.
* debian/symbols: Bump minimal version for lzma_block_compressed_size.
* Correct the 4.999.9beta+20100307-1 changelog entry to describe
which public functions were affected.
.
* Add new xz-lzma package to allow xz to provide lzma and related
commands. Conflicts: and Provides: lzma.
* xz-utils: Suggests: xz-lzma.
* xz-utils/README.Debian: Take xz-lzma into account.
.
xz-utils (4.999.9beta+20100527-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit a334348dc.
- Show both elapsed time and estimated remaining time in xz -v.
Thanks to Trent W. Buck for the idea. Closes: #574583.
- liblzma: Remove the Subblock filter from the public API
(the ABI is unchanged).
* liblzma-dev.NEWS: Update.
* xz-utils: Update Czech translation.
* Change priority of xz-utils and liblzma2 to required and
xzdec to extra.
.
xz-utils (4.999.9beta+20100307-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit f4b2b526.
- liblzma: The stream initialization functions were not correctly
initializing the internal allow_buffer_error flag. As a result,
ever since 4.999.9beta-1 in rare circumstances when decompressing
LZMA files, the xz tool would produce spurious "Unexpected end
of input" failures (Gentoo bug 305591).
- The default memory usage limit on low-memory systems has been
increased.
* debian/copyright: Clarify.
.
xz-utils (4.999.9beta+20100212-4) unstable; urgency=low
.
* debian/control: Build-Depends: autopoint instead of cvs.
Closes: #572481.
* debian/copyright: Clean up and include more details.
* debian/rules get-orig-source: Unindent comment lines.
* xz-utils: include Czech translation.
.
xz-utils (4.999.9beta+20100212-3) unstable; urgency=low
.
* liblzma-dev: Remove unneeded .la file.
* xz-utils: Dynamically link the xz binary.
* Do not waste time installing and running doxygen on buildds that
are not going to build arch-all packages.
Build-Depends-Indep: doxygen. Closes: #540444.
.
xz-utils (4.999.9beta+20100212-2) unstable; urgency=low
.
* Split off xzdec and lzmadec commands into new xzdec package.
Thanks to Guillem Jover for the idea. Closes: #571060.
* xz-utils.NEWS: advertise this change.
.
xz-utils (4.999.9beta+20100212-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit eb7d51a3f.
- xz --force compresses symlinks without complaint now.
- liblzma: the optimized CRC32 implementation for x86 no longer
misdetects the Hurd as Mac OS X.
* debian/rules: ./configure --enable-assembler on the Hurd.
* xz-utils: Simplify NEWS.Debian.gz.
* liblzma-dev: Add a NEWS file to keep track of future API changes.
.
* Drop unnecessary build-time conflict with autoconf2.13.
* Add a blank line to the end of all NEWS files.
(Works around: #247356)
* debian/README.source: Leave out “-I -i” options. Ignoring version
control cruft is the default behavior with dpkg source format 3.0.
* debian/changelog.upstream.sh: Pass ‘git log’ an explicit --format
option to avoid problems if format.pretty is set in gitconfig.
.
* Correct the 4.999.9beta+20100117-1 changelog entry. It said:
+ The user-specified memory usage limit was not being honored in
some cases.
No such bug was observed, so describe the change instead.
.
xz-utils (4.999.9beta+20100131-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit f9dd797a.
+ xz: the --list option to display information about a compressed
file (e.g., its uncompressed size) is now functional. The output
of the xz --robot --list command still may change in future
versions.
* xz-utils: NEWS.Debian.gz: Clarify how interleaved output can
go wrong.
* debian/rules: Simplify:
- remove support for comma as a delimiter for $(DEB_BUILD_OPTIONS).
- rely on dh --parallel instead of tricky logic of our own to
handle parallel builds. Build-Depends: debhelper (>= 7.4.10).
* Correct some typos in the 4.999.9beta+20100117-1 changelog entry.
* Standards-Version: 3.8.4 (checked).
* Update copyright file.
.
xz-utils (4.999.9beta+20100117-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit 07a11dad.
+ Fix some logic errors in the internal memory usage configuration
API.
+ xz will no longer compress or decompress special files in place,
even with --force.
--force still enables compression of the target of a symlink.
+ xz will no longer read compressed data from a terminal or write
it to a terminal, even with --force.
+ liblzma: many Index handling API improvements:
- An lzma_index includes more useful metadata that is not
actually from the Index. This is particularly helpful for
describing multiple-stream files.
* lzma_index_cat() does not take a stream padding argument
any more; use lzma_index_stream_padding() instead.
* lzma_index_memusage() takes two arguments now.
The new lzma_index_memused() convenience function
calculates the total memory usage of an lzma_index.
* lzma_index_count() has been replaced with
lzma_index_block_count() and lzma_index_stream_count().
* The new lzma_index_stream_flags() allows storing Stream
Flags (e.g., checksum types) with the Index information.
* The new lzma_index_checks() function indicates the list of
checksum types in use.
* lzma_index_equal() has been removed. Its semantics were
unclear, and something approximately equivalent can be
implemented by iterating over Blocks in application code.
- An lzma_index no longer represents a position within an Index.
The new lzma_index_iter type can be used for that purpose.
* Certain functions generate an iterator on demand now rather
than clobbering their lzma_index arguments. Using a single
lzma_index for multiple concurrent invocations is safe now:
lzma_index_buffer_encode(), lzma_index_encoder()
* Functions that used to specify a Record by modifying an
lzma_index argument have been renamed and taught to write
an lzma_index_iter instead:
lzma_index_locate() -> lzma_index_iter_locate()
lzma_index_rewind() -> lzma_index_iter_rewind()
lzma_index_read() -> lzma_index_iter_next()
* The lzma_index_record type used by lzma_index_read() for
complex seeks is no more. lzma_index_iter_next() instead
takes a parameter of the new lzma_index_iter_mode type.
* New function: lzma_index_iter_init()
* lzma_index_init() cannot reuse memory from an existing
lzma_index any more. The signature changed accordingly.
+ xz: support for decompressing to a sparse file
- Try to write a sparse file if the decompressed stream contains
long runs of null bytes.
- The new --no-sparse option disables this behavior.
+ xz: add Czech translation.
+ liblzma-dev: lzma_filters_copy() and lzma_filters_update() are
declared not to throw exceptions.
* liblzma: bump soname.
* xz-utils: Add NEWS.Debian describing the sparse file support.
* debian/rules: Stop explicitly disabling assembler optimizations on
the Hurd. The configure script will check if a platform is
supported.
.
* debian/rules: Update clean target to handle comments and wildcards
in .gitignore.
* Build-Depends: perl.
.
* debian/rules: Speed up build by using autoreconf --symlink.
* Remove debian/dirs lists.
* Update copyright file and fix a small typo.
.
xz-utils (4.999.9beta+20091116-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit d315ca4.
+ liblzma: add some new functions:
- lzma_filters_copy() to copy a filter chain;
- lzma_filters_update() to change compression options mid-stream;
- lzma_physmem() to retrieve the total quantity of installed RAM.
+ Fix a design error in liblzma API.
- Stop requiring caller to maintain filter chain during
compression. The library used to read it for new compression
options. Callers that need to change options mid-stream should
use lzma_filters_update() instead.
- Remove 'persistent' member from struct lzma_options_lzma.
+ xz: add --robot --info-memory options, for front-ends to use to
read the memory usage limit.
* liblzma: bump soname; add README.Debian explaining why soname
differs from upstream.
* Use source format 3.0 (quilt).
* Update and clarify copyright file.
.
xz-utils (4.999.9beta+20091016-1) unstable; urgency=low
.
* New upstream snapshot, taken from upstream commit 78e92c1.
* Drop xzmore.1 patch, applied upstream.
* debian/rules: Disable assembler optimizations on hurd. (Closes: #553331)
* debian/control: Clarify binary package descriptions. Thanks to
Justin B Rye and Ben Finney for the text.
* debian/rules get-orig-source: Use commit date (instead of last patch
date) to name snapshots.
.
xz-utils (4.999.9beta+20091004-1) unstable; urgency=low
.
* Upload to unstable. (Closes: #543562)
* New upstream snapshot, taken from upstream commit ebfb2c5.
* Patch xzmore.1 to use dashes instead of minus signs.
* debian/control: Conflicts: xz-lzma. (Closes: #550249)
* liblzma-doc: Register Doxygen-generated docs with doc-base.
* debian/changelog.upstream.sh: Declare local variables.
* debian/changelog.upstream.sh: Cope with multiple Debian revisions per
upstream version.
* debian/rules: Use ":=" where appropriate.
* Add watch file.
.
xz-utils (4.999.9beta+20091002-1) experimental; urgency=low
.
* New upstream snapshot, taken from upstream commit 29fd321.
* debian/control: Build-Depends: cvs (for autopoint).
.
xz-utils (4.999.9beta-1) experimental; urgency=low
.
[ Jonathan Nieder ]
* New upstream release.
- Fix a data corruption in the compression code. (Closes: #544872)
- xzdiff: Fix comparing two compressed files. (Closes: #540543)
- Most of XZ Utils is now in the public domain. (Closes: #541391)
- Add doc/history.txt to the distributed tarball. (Closes: #541540)
* Update and clarify copyright file.
* Drop lzma compatibility commands for now. (Closes: #542060, #540232)
Add instructions to README.Debian for installing them locally.
* debian/control: Add information about the packaging Git repository.
* debian/control: Clarify package descriptions.
* debian/README.source: Clarify build instructions.
* Add debian/.gitignore listing build products.
* Build xz-utils with static liblzma.
- debian/rules: Use configure --enable-dynamic=mixed.
* Optimize xzdec for size, following suggestion in PACKAGERS.
- debian/rules: Build xzdec separately so it can be optimized for size.
- debian/control: Build-Depends: debhelper (>= 7.3.0).
* Generate upstream changelog instead of shipping placeholder.
- debian/README.source: Add instructions for regenerating upstream
changelog file.
- debian/changelog.upstream.sh: New script.
- debian/rules: Install generated changelog file.
* liblzma-doc: Drop documentation already shipped in
/usr/share/doc/xz-utils.
* liblzma-dev, liblzma-doc: Add short README.Debian with pointers to
development documentation.
* Drop debian/xzdec.1, since upstream ships a better man page.
* Run autotools at build time.
+ debian/control:
- Build-Depends: autoconf, automake, libtool, gettext
- Build-Conflicts: autoconf2.13, automake1.4
+ debian/rules:
- configure: autoreconf -fi
- clean: remove autotools-generated files to avoid .diff.gz
changes when built twice in a row.
* debian/rules: Add get-orig-source target.
* Prepare for upload to experimental.
.
[ Cristian Greco ]
* debian/copyright: refer to versioned GPL-3 file.
* debian/control: remove duplicate field ‘section’ in package xz-utils.
.
xz-utils (4.999.8beta-1) experimental; urgency=low
.
[ Jonathan Nieder ]
* Initial package for Debian. (Closes: #518803)
+ debian/rules:
- add minimal rules file (using Debhelper 7), a control file
describing the binary packages, and an appropriate compat file.
- use configure --enable-dynamic; use up-to-date config.guess and
config.sub files.
- do not run automake and so on on autobuilders. Instead, we can
run them ourselves when we build the source package.
+ debian/README.source:
- add informations about the packaging GIT repository.
* Add liblzma-doc package with Doxygen-generated API docs.
.
[ Mohammed Adnène Trojette ]
* Prepare for upload to experimental.
Checksums-Sha1:
542f01429c2263ff1d9159be30d7f53f16abaf3d 2114 xz-utils_5.0.0-2~bpo50+1.dsc
bcce697d7f09584f0feb21e35b13a15ba7417a1f 1232154 xz-utils_5.0.0.orig.tar.gz
96e49ed409f9de6d7610ae538f310cd499a74352 117716 xz-utils_5.0.0-2~bpo50+1.debian.tar.gz
228efc06a645a15af8aa9ef5ee2ab34936e4b57a 181176 liblzma2_5.0.0-2~bpo50+1_amd64.deb
84f3751028c6384b27b23c235d2283bfe5802a68 203904 xz-utils_5.0.0-2~bpo50+1_amd64.deb
e01686d86ef644fb2ed59c4bd0facfcae52373d9 107782 xz-lzma_5.0.0-2~bpo50+1_all.deb
d3cc8c370f507b819b9d090f53bd86fec6c6ab4d 151336 xzdec_5.0.0-2~bpo50+1_amd64.deb
8ffc50568ba7c317e6b0d1358f255ff0db26639b 194700 liblzma-dev_5.0.0-2~bpo50+1_amd64.deb
4d425835cc501afb5cc7967c82345007f1d29c4a 432064 liblzma-doc_5.0.0-2~bpo50+1_all.deb
Checksums-Sha256:
4aeb7b5ac0d856bf330030e018141d5f12bfe31467add56b4c7b8652a42067e0 2114 xz-utils_5.0.0-2~bpo50+1.dsc
eba9211990a642fc2c35ea02618b710c7fa898d78ccca48b546a07bdde03c44d 1232154 xz-utils_5.0.0.orig.tar.gz
4db8ae78482d8ac3c7bbab51bf848961626133add81a7645aafa1111da6a9a46 117716 xz-utils_5.0.0-2~bpo50+1.debian.tar.gz
52095794b3034f452f3efe24d3e8866fd9a1e720f4120dddf3ee1f7e2c5625fb 181176 liblzma2_5.0.0-2~bpo50+1_amd64.deb
3c3b769d10318b3b61679baa8fbe6b962ba037f59151be8ebcb73a1413264234 203904 xz-utils_5.0.0-2~bpo50+1_amd64.deb
a5b11a8a0aa0cc5887f105abe9928ed48a4a328084d09c9e1c7578b7115cf6bf 107782 xz-lzma_5.0.0-2~bpo50+1_all.deb
f27400ff2d344756c86708f9786d9ec5421763ef4879c544df339f452c287c12 151336 xzdec_5.0.0-2~bpo50+1_amd64.deb
1d1568405e8269eb960c6726f37c033deecd79867bd2a214cfdc165ac40ff07b 194700 liblzma-dev_5.0.0-2~bpo50+1_amd64.deb
2d71622339e54a3fadd1b2ff6829a0c98deec066ab3e2f8e6b4dd9d741d38b3c 432064 liblzma-doc_5.0.0-2~bpo50+1_all.deb
Files:
672028e693eb467a272747d9739b507b 2114 utils required xz-utils_5.0.0-2~bpo50+1.dsc
f3c0706d100ad2b6d63327584d026c50 1232154 utils required xz-utils_5.0.0.orig.tar.gz
8f1d1a776c5b65503b57efdfa4dea509 117716 utils required xz-utils_5.0.0-2~bpo50+1.debian.tar.gz
8c6de8dd719dc6c60ef61048e1a87993 181176 libs required liblzma2_5.0.0-2~bpo50+1_amd64.deb
00becab5784380a49cb8adae8c9d1f82 203904 utils required xz-utils_5.0.0-2~bpo50+1_amd64.deb
c15fc559743eecea1d8d8f2f115fb013 107782 utils extra xz-lzma_5.0.0-2~bpo50+1_all.deb
0f736fb1497a62b7b27a31dacfae89ea 151336 utils extra xzdec_5.0.0-2~bpo50+1_amd64.deb
75fca5c5c308d084ffbc46e6cb62118e 194700 libdevel optional liblzma-dev_5.0.0-2~bpo50+1_amd64.deb
a31a0adf779c0149368bbd816a62a8d1 432064 doc optional liblzma-doc_5.0.0-2~bpo50+1_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (MirBSD)
iQIcBAEBCQAGBQJM+q8fAAoJEHa1NLLpkAfgzdEP/itceXfC1t0LdmGR54/lh6wX
rjPxcK3lNqb4eGFO96cLgW6qDIdt27X9artu18q2pHkq6IKgxbfaHo/vEdyneeeb
saV6DtRucDvJtmWIYFbFZaPbzXcMuXCZ82sUzhCrCaTzKZ/I9yYobPRjTM8h7ZVM
jL0NIXlWYA26O8jGN2PJgmgStH1y8ZY3jZDbUKrIhKDSTDWPT6xBLaYHJt917AhO
U29loGnDJ4tjQ5axdGRFcJEJbk45nvPunbm1Ao2of2teeJDZVdjmvv/aSWtdD0A4
JcZD5zqy/T/p9wL16MD0VF6d1BmnnRTeE3dEakAgcR1BULcu9kVrWHi+KRIP+azs
in8N8l/ccZXXwMH95uF7IKOmTKLgfV79yYnlkTvRSuz4eYfrwcffk85N07PLLHck
r7rpV673hNPo5qRcQTF9FkGZlo9pmT/wYSbxYnT58JSdpnyGj37iZrhdWAxLmBoZ
nWzglW2k5Od/wWLtN+5U7smrbms+ENy/Obt0yK4r4H5Cgt1VLT75Yg0bYyoLyGVY
bsSqmQTm0QVnfhQBU1AYYi8n7EASrNLlDAhrhgqQovrtZjqs+rOx9IU5r8ycT/Pj
0KIIglIeR4QPJhkA+Ry4fnOeTIJmJUJGK4E6l2y0WJsuC2K+CpXpmfM+TicoaUvB
pg2twv4TwYsvwSgjTm1n
=U6J0
-----END PGP SIGNATURE-----
Accepted:
liblzma-dev_5.0.0-2~bpo50+1_amd64.deb
to main/x/xz-utils/liblzma-dev_5.0.0-2~bpo50+1_amd64.deb
liblzma-doc_5.0.0-2~bpo50+1_all.deb
to main/x/xz-utils/liblzma-doc_5.0.0-2~bpo50+1_all.deb
liblzma2_5.0.0-2~bpo50+1_amd64.deb
to main/x/xz-utils/liblzma2_5.0.0-2~bpo50+1_amd64.deb
xz-lzma_5.0.0-2~bpo50+1_all.deb
to main/x/xz-utils/xz-lzma_5.0.0-2~bpo50+1_all.deb
xz-utils_5.0.0-2~bpo50+1.debian.tar.gz
to main/x/xz-utils/xz-utils_5.0.0-2~bpo50+1.debian.tar.gz
xz-utils_5.0.0-2~bpo50+1.dsc
to main/x/xz-utils/xz-utils_5.0.0-2~bpo50+1.dsc
xz-utils_5.0.0-2~bpo50+1_amd64.deb
to main/x/xz-utils/xz-utils_5.0.0-2~bpo50+1_amd64.deb
xz-utils_5.0.0.orig.tar.gz
to main/x/xz-utils/xz-utils_5.0.0.orig.tar.gz
xzdec_5.0.0-2~bpo50+1_amd64.deb
to main/x/xz-utils/xzdec_5.0.0-2~bpo50+1_amd64.deb
Reply to: