[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accepted debhelper 8.0.0~bpo50+1 (source all)

Hash: SHA1

Format: 1.8
Date: Thu, 09 Sep 2010 20:41:40 +0000
Source: debhelper
Binary: debhelper
Architecture: source all
Version: 8.0.0~bpo50+1
Distribution: lenny-backports
Urgency: low
Maintainer: Joey Hess <joeyh@debian.org>
Changed-By: Alexander Wirt <formorer@debian.org>
 debhelper  - helper programs for debian/rules
Closes: 521258 541773 557603 563269 563557 566840 567586 567737 568081 570039 570373 570443 570503 571968 572077 573702 574351 577179 578805 579317 580837 581233 582749 583328 586065 587654 589574
 debhelper (8.0.0~bpo50+1) lenny-backports; urgency=low
   * Rebuild for lenny-backports.
   * Revert the no-op change for dh_desktop
 debhelper (8.0.0) unstable; urgency=low
   [ Carsten Hey ]
   * dh_fixperms: Ensure files in /etc/sudoers.d/ are mode 440. Closes: #589574
   [ Joey Hess ]
   * Finalized v8 mode, which is the new recommended default.
 debhelper (7.9.3) unstable; urgency=low
   * perl_makemaker: import compat(). Closes: #587654
 debhelper (7.9.2) unstable; urgency=low
   * In v8 mode, stop passing packlist=0 in perl_makemaker buildsystem,
     since perl_build is tried first. Avoids the makemaker warning message
     introduced by the fix to #527990.
 debhelper (7.9.1) unstable; urgency=low
   * Started work on Debhelper v8. It is still experimental, and more
     changes are planned for that mode.
   * dh_installman: Support .so links relative to the current section.
   * dh_installman: Avoid converting .so links to symlinks if the link
     target is not present in the same binary package, on advice of
     Colin Watson. (To support eventual so search paths.)
   * Add deprecation warning for dh_clean -k.
   * dh_testversion: Removed this deprecated and unused command.
   * debian/compress files are now deprecated. Seems only one package
     (genesis) still uses them.
   * dh_fixperms: Tighten globs used to find library .so files,
     avoiding incorrectly matching things like "foo.sources". Closes: #583328
   * dh_installchangelogs: Support packages placing their changelog in a
     file with a name like HISTORY. Closes: #582749
   * dh_installchangelogs: Also look for changelog files in doc(s)
     subdirectories. Closes: #521258
   * In v8 mode, do not allow directly passing unknown options to debhelper
     commands. (Unknown options in DH_OPTIONS still only result in warnings.)
   * In v8 mode, dh_makeshlibs will run dpkg-gensymbols on all shared
     libraries it generates shlibs files for. This means that -X can be
     used to exclude libraries from processing by dpkg-gensymbols. It also
     means that libraries in unusual locations, where dpkg-gensymbols does
     not itself normally look, will be passed to it, a behavior change which
     may break some packages. Closes: #557603
   * In v8 mode, dh expects the sequence to run is always its first parameter.
     (Ie, use "dh $@ --foo", not "dh --foo $@")
     This avoids ambiguities when parsing options to be passed on to debhelper
     commands. (See #570039)
   * In v8 mode, prefer the perl_build buildsystem over perl_makemaker.
     Closes: #578805
   * postrm-init: Avoid calling the error handler if update-rc.d fails.
     Closes: #586065
 debhelper (7.4.20) unstable; urgency=low
   * Drop one more call to dpkg-architecture. Closes: #580837
     (Raphael Geissert)
   * Further reduce the number of calls to dpkg-architecture to zero,
     in a typical package with no explicit architecture mentions
     in control file or debhelper config files.
   * dh_perl: use debian_abi for XS modules. Closes: #581233
 debhelper (7.4.19) unstable; urgency=low
   * Memoize architecture comparisons in samearch, and avoid calling
     dpkg-architecture at all for simple comparisons that clearly
     do not involve architecture wildcards. Closes:# 579317
 debhelper (7.4.18) unstable; urgency=low
   * dh_gconf: Depend on new gconf2 that uses triggers, and stop
     calling triggered programs manually. Closes: #577179
 debhelper (7.4.17) unstable; urgency=low
   * Fix #572077 in one place I missed earlier. (See #576885)
   * dh: Fixed example of overriding binary target.
   * Began finalizing list of changes for v8 compat level.
 debhelper (7.4.16) unstable; urgency=low
   * Updated French translation.
   * makefile buildsystem: Chomp output during test for full compatibility
     with debhelper 7.4.11. Closes: #570503
   * dh_install: Now --list-missing and --fail-missing are useful even when
     not all packages are acted on (due to architecture limits or flags).
     Closes: #570373
   * Typo. Closes: #571968
   * If neither -a or -i are specified, debhelper commands used to default
     to acting on all packages in the control file, which was a guaranteed
     failure if the control file listed packages that did not build for the
     target architecture. After recent optimisations, this default behavior
     can efficiently be changed to the more sane default of acting on only
     packages that can be built for the current architecture. This change
     is mostly useful when using minimal rules files with dh. Closes: #572077
   * dh_md5sums: Sort to ensure stable, more diffable order. Closes: #573702
   * dh: Allow --list-addons to be used when not in a source package.
     Closes: #574351
   * dh: Improve documentation.
 debhelper (7.4.15) unstable; urgency=low
   * The fix for #563557 caused some new trouble involving makefile
     that misbehave when stderr is closed. Reopen it to /dev/null
     when testing for the existance of a makefile target. Closes: #570443
 debhelper (7.4.14) unstable; urgency=low
   * dh: Disable option bundling to avoid mis-parsing bundled options such
     as "-Bpython-support". Closes: #570039
 debhelper (7.4.13) unstable; urgency=low
   * dh_compress: Avoid compressing images in /usr/share/info. Closes: #567586
   * Fix handling of -O with options specified by commands. Closes: #568081
 debhelper (7.4.12) unstable; urgency=low
   * dh_bugfiles: Doc typo. Closes: #563269
   * makefile: Support the (asking for trouble) case of MAKE being set to
     something with a space in it. Closes: #563557
   * Fix warning about unknown options passed to commands in override targets.
   * Add -O option, which can be used to pass options to commands, ignoring
     options that they do not support.
   * dh: Use -O to pass user-specified options to the commands it runs.
     This solves the problem with passing "-Bbuild" to dh, where commands
     that do not support -B would see a bogus -u option. Closes: #541773
     (It also ensures that the commands dh prints out can really be run.)
   * qmake: New buildsystem contributed by Kel Modderman. Closes: #566840
   * Fix typo in call to abs2rel in --builddir sanitize code.
     Closes: #567737
 0ad3a3880c893e9e739efb55cc56f92cdda54896 946 debhelper_8.0.0~bpo50+1.dsc
 b9ddbc243c4a6b95d7800d9cbaeae43727256514 359178 debhelper_8.0.0~bpo50+1.tar.gz
 0c21c99e5bd8371900525786942772eef86b4019 453674 debhelper_8.0.0~bpo50+1_all.deb
 976ffa0745e0a14768425aba892365f848d7d30d986b22b3e242417367ff8927 946 debhelper_8.0.0~bpo50+1.dsc
 1692c2b81959a5a98e7995c7f54911022db691843c1f808d8acf88fa25ed8287 359178 debhelper_8.0.0~bpo50+1.tar.gz
 5b646a837395ac0bd966c9c6c16485deb17fc413429b78453df4f3dec05b0a9e 453674 debhelper_8.0.0~bpo50+1_all.deb
 25a45cf657117f8dd8c6c97482823495 946 devel optional debhelper_8.0.0~bpo50+1.dsc
 659a7f29641a66ce2f487867462b76e2 359178 devel optional debhelper_8.0.0~bpo50+1.tar.gz
 4a83a327779c50c978f32967a65a5fa5 453674 devel optional debhelper_8.0.0~bpo50+1_all.deb

Version: GnuPG v1.4.9 (GNU/Linux)


  to main/d/debhelper/debhelper_8.0.0~bpo50+1.dsc
  to main/d/debhelper/debhelper_8.0.0~bpo50+1.tar.gz
  to main/d/debhelper/debhelper_8.0.0~bpo50+1_all.deb

Reply to: