linux-2.6_2.6.32-20~bpo50+1_amd64.changes is NEW
firmware-linux-free_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/firmware-linux-free_2.6.32-20~bpo50+1_all.deb
linux-2.6_2.6.32-20~bpo50+1.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.32-20~bpo50+1.diff.gz
linux-2.6_2.6.32-20~bpo50+1.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.32-20~bpo50+1.dsc
linux-base_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-base_2.6.32-20~bpo50+1_all.deb
linux-doc-2.6.32_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.32_2.6.32-20~bpo50+1_all.deb
linux-headers-2.6.32-bpo.5-all-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-all-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-all_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-all_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-common-openvz_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-common-openvz_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-common-vserver_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-common-vserver_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-common-xen_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-common-xen_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-common_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-common_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-headers-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-openvz-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-openvz-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-vserver-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-vserver-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-xen-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-xen-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb
linux-image-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
linux-libc-dev_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/linux-libc-dev_2.6.32-20~bpo50+1_amd64.deb
linux-manual-2.6.32_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.32_2.6.32-20~bpo50+1_all.deb
linux-patch-debian-2.6.32_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-20~bpo50+1_all.deb
linux-source-2.6.32_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.32_2.6.32-20~bpo50+1_all.deb
linux-support-2.6.32-bpo.5_2.6.32-20~bpo50+1_all.deb
to pool/main/l/linux-2.6/linux-support-2.6.32-bpo.5_2.6.32-20~bpo50+1_all.deb
(new) linux-tools-2.6.32_2.6.32-20~bpo50+1_amd64.deb optional kernel
Performance analysis tools for Linux 2.6.32
This package contains the 'perf' performance analysis tools for Linux
kernel version 2.6.32.
.
The linux-base package contains a 'perf' command which will invoke the
appropriate version for the running kernel.
xen-linux-system-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
to pool/main/l/linux-2.6/xen-linux-system-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb
Changes: linux-2.6 (2.6.32-20~bpo50+1) lenny-backports; urgency=low
.
* Rebuild for lenny.
.
linux-2.6 (2.6.32-20) unstable; urgency=low
.
[ Moritz Muehlenhoff ]
* Backport XVR1000 driver (Closes: #574243)
.
[ Ben Hutchings ]
* Add stable 2.6.32.18:
- CIFS: Fix compile error with __init in cifs_init_dns_resolver()
definition (FTBFS for most architectures)
- GFS2: rename causes kernel Oops (CVE-2010-2798)
- xfs: prevent swapext from operating on write-only files
(CVE-2010-2226)
* Update debconf template translations:
- Swedish (Martin Bagge) (Closes: #592045)
- German (Holger Wansing) (Closes: #592226)
* [i386/openvz-686] Remove AMD Geode LX and VIA C3 "Nehemiah" from the
list of supported processors; they do not implement PAE
* V4L/DVB: Add Elgato EyeTV Diversity to dibcom driver (Closes: #591710)
* [s390] dasd: use correct label location for diag fba disks
(Closes: #582281)
* Add drm changes from stable 2.6.34.2 (thanks to Stefan Bader) and
2.6.34.3
* drm/i915: disable FBC when more than one pipe is active
(Closes: #589077)
* IB/ipath: Fix probe failure path (Closes: #579393)
* ext4: fix freeze deadlock under IO (regression introduced in 2.6.32.17)
* xen: Completely disable use of XSAVE (Closes: #592428)
.
[ Martin Michlmayr ]
* [armel/orion5x] Add a missing #include to fix a build issue.
* [armel/kirkwood, armel/orion5x] Build-in support for more devices.
.
[ dann frazier ]
* can: add limit for nframes and clean up signed/unsigned variables
.
linux-2.6 (2.6.32-19) unstable; urgency=low
.
[ maximilian attems ]
* inotify send IN_UNMOUNT events.
* inotify fix oneshot support.
.
[ Ben Hutchings ]
* linux-base: Remove dependency on libapt-pkg-perl (Closes: #589996)
* pata_pdc202xx_old: Fix UDMA mode for PDC2024x and PDC2026x controllers
(Closes: #590532)
* Update debconf template translations:
- Czech (Michal Simunek) (Closes: #590546)
- Portugese (Américo Monteiro) (Closes: #590557)
- French (David Prévot) (Closes: #591149)
- Russian (Yuri Kozlov) (Closes: #591241)
* Add stable 2.6.32.17:
- ethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALL
(CVE-2010-2478)
- GFS2: Fix up system xattrs (CVE-2010-2525)
- Revert ABI changes in firmware_class and ssb
- Ignore ABI changes in acpi_processor, hostap and jbd2
* Add drm changes from stable 2.6.33.7:
- drm/i915: Enable low-power render writes on GEN3 hardware (915, 945,
G33 and Atom "Pineview") (Closes: #590193, maybe others)
* [i386/xen-686] Remove AMD Geode LX and VIA C3 "Nehemiah" from the list
of supported processors; they do not implement PAE
* [x86] Add samsung-laptop driver
.
[ dann frazier ]
* [ia64] Fix crash when gcore reads gate area (Closes: #588574)
.
[ Bastian Blank ]
* Update Xen patch.
- Ignore ABI changes.
.
linux-2.6 (2.6.32-18) unstable; urgency=low
.
[ Ben Hutchings ]
* iwlwifi: Allocate pages for RX buffers, reducing the probability of
allocation failure (Closes: #580124)
* postinst: Remove support for 'default' boot loaders. Warn users on
upgrade if the current configuration may rely on this.
* rt2860sta, rt2870sta: Apply changes from Linux 2.6.33 and 2.6.34
- rt2860sta: Fix WPA(2)PSK issue when group cipher of AP is WEP40
or WEP104 (Closes: #574766)
* rt3090sta: Replace with rt2860sta (Closes: #588863)
* [i386/686] Remove AMD K6 from the list of supported processors; it
does not implement the CMOV instruction
* drm/i915: Add 'reclaimable' to i915 self-reclaimable page allocations
(really closes: #534422, we hope)
* Revert "x86, paravirt: Add a global synchronization point for pvclock",
included in stable 2.6.32.16 (Closes: #588426)
* 3c59x: Fix call to mdio_sync() with the wrong argument (Closes: #589989)
.
[ Martin Michlmayr ]
* Add some patches from the Orion tree, including support for Marvell's
Armada 300 (88F6282):
- Kirkwood: update MPP definition.
- Kirkwood: fix HP t5325 after updating MPP definitions
- leds: leds-gpio: Change blink_set callback to be able to turn off
blinking
- net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs
setup flag
- orion5x: Base support for DNS-323 rev C1
- orion5x: Fix soft-reset for some platforms
- mtd: orion/kirkwood: add RnB line support to orion mtd driver
- mtd: kirkwood: allow machines to register RnB callback
- Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips
- Kirkwood: Add support for 88f6282
- PCI: add platform private data to pci_sys_data
- Kirkwood: add support for PCIe1
- Kirkwood: more factorization of the PCIe init code
.
[ maximilian attems ]
* sched: Fix over-scheduling bug.
.
linux-2.6 (2.6.32-17) unstable; urgency=low
.
[ maximilian attems ]
* agp: add no warn since we have a fallback to vmalloc paths.
.
[ Ben Hutchings ]
* linux-tools: Fix build for hppa and do not attempt to build for
architectures where perf events are not available (Closes: #588409)
* linux-tools: Add build-dependency on binutils-dev to enable symbol
demangling in perf
* drm/i915: Fix memory corruption on resume from hibernation
(Closes: #534422)
.
linux-2.6 (2.6.32-16) unstable; urgency=low
.
[ dann frazier ]
* [hppa] clear floating point exception flag on SIGFPE signal
(Closes: #559406)
.
[ Ben Hutchings ]
* Add stable 2.6.32.15
* Add mantis and hopper DVB drivers with mb86a16 and tda665x DVB
front-ends, backported by Bjørn Mork (Closes: #577264)
* Build inet_lro as a module
* [sparc] Enable CONFIG_FB_XVR500, CONFIG_FB_XVR2500 (Closes: #508108)
* Update Spanish debconf templates, thanks to Omar Campagne
(Closes: #580538)
* Revert "Add EC path for Thinkpad X100."; it is incomplete and broken
* sctp: fix append error cause to ERROR chunk correctly (regression due
to fix for CVE-2010-1173)
* [powerpc] Enable pata_amd driver, replacing amd74xx
* eeepc-laptop: Disable wireless hotplug on more models where the
controller is not at the expected address (Closes: #576199)
* [mips] Fix boot from ATA hard drives (Closes: #584784):
- Set io_map_base for several PCI bridges lacking it
- Replace per-platform built-in IDE drivers with libata-based drivers
- Enable BLK_DEV_SD as built-in on all platforms
* Revert "vlan/macvlan: propagate transmission state to upper layers"
(Closes: #585770)
* linux-base: Don't identify LVM2 PVs by UUID (Closes: #585852)
* usb-serial: Add generic USB WWAN code, backported by Mark Hymers
(Closes: #585661)
- option, qcserial: Use generic USB WWAN code
- qcserial: Add support for Qualcomm Gobi 2000 devices
* radeon: Fix MacBook Pro connector quirk (Closes: #585943)
* r8169: Fix MDIO timing (Closes: #583139)
* Move NEWS to linux-latest-2.6 (Closes: #586401)
* 3c59x: Change locking to avoid use of disable_irq() (Closes: #586967)
* Enable IPv6 support for IPVS (IP_VS_IPV6) (Closes: #584549)
* Revert "tpm: autoload tpm_tis based on system PnP IDs", included in
stable 2.6.32.12 (Closes: #584273)
* linux-base: If the disk ID update process fails, give the user a
chance to retry or change their answers (Closes: #585609)
* asix: fix setting mac address for AX88772 (Closes: #587580)
* ipv6: Clamp reported valid_lft to a minimum of 0 (Closes: #514644)
* ipv6: Use interface max_desync_factor instead of static default
(Closes: #514646)
* Add stable 2.6.32.16:
- Fixes CVE-2010-1641, CVE-2010-1187, CVE-2010-1148, CVE-2010-1173
and CVE-2010-2071
- libata: disable ATAPI AN by default (Closes: #582737, #582903)
* Add drm changes from stable 2.6.33.6
* [ia64, powerpc, sparc, x86] Enable KPROBES and KRETPROBES
(Closes: #584130)
* r8192s_usb: Fix various bugs:
- Check for skb allocation failure in 2 more places
- Update LED control code
- Clean up in case of an error in module initialisation
- Rename and remove proc directories correctly if an interface is
not called wlan0 (Closes: #582972)
- Correct device ID table (Closes: #584945, #587985)
* Add r8192u_usb driver
* Add linux-tools-<version> package containing the perf tool
(Closes: #548715)
* Enable USB_SERIAL_TI (Closes: #588096) and USB_SERIAL_WHITEHEAT
.
[ Aurelien Jarno ]
* [sh4] optimize runtime disabling of trapped I/O.
* [mips] backport mips/swarm: fix M3 TLB exception handler.
.
[ Moritz Muehlenhoff ]
* Enable X86 board specific fixups for reboot (Closes: #536537)
.
[ Martin Michlmayr ]
* OpenRD-Base: revert patch "allow SD/UART1 selection" since it
never made it upstream.
* ARM: update mach types.
* Add support for OpenRD-Ultimate.
* QNAP TS-11x/TS-21x: Add MPP36 (RAM) and MPP44 (board ID).
* Add support for the HP t5325 Thin Client.
* m25p80: Add support for Macronix 25L8005.
* Add framebuffer driver for XGI chipsets.
* [armel/kirkwood] Enable FB_XGI and FRAMEBUFFER_CONSOLE.
* [armel] Make MOUSE_PS2 modular.
* [armel] Build INPUT_UINPUT for all flavours.
* Update Marvell CESA (mv_cesa) driver (Closes: #585790):
- Invoke the user callback from a softirq context
- Remove compiler warning in mv_cesa driver
- Fix situation where the dest sglist is organized differently than...
- Fix situations where the src sglist spans more data than the reques...
- Enqueue generic async requests
- Rename a variable to a more suitable name
- Execute some code via function pointers rathr than direct calls
- Make the copy-back of data optional
- Support processing of data from previous requests
- Add sha1 and hmac(sha1) async hash drivers
* Update DisplayLink (udlfb) driver:
- add dynamic modeset support
- checkpatch cleanup
- reorganize function order
- pre-allocated urb list helpers
- clean up function naming
- Add functions to expose sysfs metrics and controls
- Rework startup and teardown to fix race conditions
- improved rendering performance
- Support for fbdev mmap clients (defio)
- explicit dependencies and warnings
- remove printk and small cleanup
* [armel/kirkwood] Enable FB_UDL.
* [armel] Disable PARPORT_PC (Closes: #588164)
.
[ Bastian Blank ]
* Disable mISDN support for NETJet cards. The driver binds a generic PCI
bridge.
* Disable ISDN4Linux drivers.
.
[ maximilian attems]
* Update openvz patch to 5fd638726a69.
Override entries for your package:
firmware-linux-free_2.6.32-20~bpo50+1_all.deb - optional kernel
linux-2.6_2.6.32-20~bpo50+1.dsc - source devel
linux-base_2.6.32-20~bpo50+1_all.deb - optional kernel
linux-doc-2.6.32_2.6.32-20~bpo50+1_all.deb - optional doc
linux-headers-2.6.32-bpo.5-all-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-all_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-common-openvz_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-common-vserver_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-common-xen_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-common_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-headers-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-image-2.6.32-bpo.5-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb - extra debug
linux-image-2.6.32-bpo.5-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-image-2.6.32-bpo.5-openvz-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb - extra debug
linux-image-2.6.32-bpo.5-openvz-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-image-2.6.32-bpo.5-vserver-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb - extra debug
linux-image-2.6.32-bpo.5-vserver-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-image-2.6.32-bpo.5-xen-amd64-dbg_2.6.32-20~bpo50+1_amd64.deb - extra debug
linux-image-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
linux-libc-dev_2.6.32-20~bpo50+1_amd64.deb - optional devel
linux-manual-2.6.32_2.6.32-20~bpo50+1_all.deb - optional doc
linux-patch-debian-2.6.32_2.6.32-20~bpo50+1_all.deb - optional kernel
linux-source-2.6.32_2.6.32-20~bpo50+1_all.deb - optional kernel
linux-support-2.6.32-bpo.5_2.6.32-20~bpo50+1_all.deb - optional devel
xen-linux-system-2.6.32-bpo.5-xen-amd64_2.6.32-20~bpo50+1_amd64.deb - optional kernel
Announcing to backports-changes@lists.backports.org
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
distributions.
Reply to: