[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Accepted debhelper 7.0.15~bpo40+1 (source all)

Hash: SHA1

Format: 1.7
Date: Tue, 16 Sep 2008 16:21:03 +0200
Source: debhelper
Binary: debhelper
Architecture: source all
Version: 7.0.15~bpo40+1
Distribution: etch-backports
Urgency: medium
Maintainer: Joey Hess <joeyh@debian.org>
Changed-By: Micha Lenk <micha@lenk.info>
 debhelper  - helper programs for debian/rules
Closes: 109642 166320 206765 253234 443978 445541 448094 450608 452337 452717 453051 458114 459224 459226 459426 460340 460351 461339 461392 462937 467100 468959 470913 471060 471196 477391 477933 478475 478958 479647 480191 480200 481899 484772 485116 486327 486439 486464 487938 489918
 debhelper (7.0.15~bpo40+1) etch-backports; urgency=low
   * Backport for Debian Etch (needs man-db backport).
   * Revert the use of features introduced by dpkg-dev packages newer than
     Debian Etch. In detail:
     - dh_makeshlibs does not support symbol files any more (re-opens #443978)
       so it doesn't support -I for including symbol files either
       (re-opens #452717),
     - dh_shlibdeps: Revert updated documentation for -L and -l for
       dpkg-shlibdeps being not so smart any more (re-opens #459226),
     - dh_shlibdeps: If a relative path is specified in -l, prepend the
       pwd to it again (changed in 6.0.0 due to changed dpkg-shlibdeps
     - all in all lower Depends to version 1.13.13 of dpkg-dev
     essentially reverting partial changes from 5.0.61, 5.0.62 and 6.0.0.
   * Adding myself to uploaders for monitoring on my QA page.
 debhelper (7.0.15) unstable; urgency=low
   * dh_clean: Do not delete *-stamp files in -k mode in v7. Closes: #489918
 debhelper (7.0.14) unstable; urgency=low
   * Load python-support sequence file first, to allow ones loaded later to
     disable it.
 debhelper (7.0.13) unstable; urgency=low
   * dh_auto_install: Rather than looking at the number of binary packages
     being acted on, look at the total number of binary packages in the
     source package when deciding whether to install to debian/package or
     debian/tmp. This avoids inconsistencies when building mixed arch all+any
     packages using the binary-indep and binary-arch targets.
     Closes: #487938
 debhelper (7.0.12) unstable; urgency=medium
   * Correct docs about dh_install and debian/tmp in v7 mode. It first looks in
     the current directory, or whatever is configured with --srcdir. Then it
     always falls back to looking in debian/tmp.
   * Medium urgency to get this doc fix into testing.
 debhelper (7.0.11) unstable; urgency=low
   * dh: Man page fix. Closes: #485116
   * Add stamp files to example rules targets. Closes: #486327
   * Add a build dependency on file. The rules file now runs dh_strip and
     dh_shlibdeps, which both use it. (It could be changed not to, but
     it's good to have it run all the commands as a test.) Closes: #486439
   * Typo fix. Closes: #486464
 debhelper (7.0.10) unstable; urgency=low
   * dh_compress: Do not compress index.sgml files, as generated by gtk-doc.
     Closes: #484772
 debhelper (7.0.9) unstable; urgency=low
   * rules.tiny: Typo fix. Closes: #479647
   * dh_installinit: Add --restart-after-upgrade, which avoids stopping a
     daemon in the prerm, and instead restarts it in the postinst, keeping
     its downtime minimal. Since some daemons could break if files are upgraded
     while they're running, it's not the default. It might become the default
     in a future (v8) compatibility level. Closes: #471060
   * dh: fix POD error. Closes: #480191
   * dh: Typo fixes. Closes: #480200
   * dh: Add remove_command to the sequence interface.
   * dh_auto_clean: setup.py clean can create pyc files. Remove. Closes: #481899
 debhelper (7.0.8) unstable; urgency=low
   * dh: Add an interface that third-party packages providing debhelper commands
     can use to insert them into a command sequence.
     (See dh(1), "SEQUENCE ADDONS".)
   * dh: --with=foo can be used to include such third-party commands.
     So, for example, --with=cli could add the dh_cli* commands from
   * Moved python-support special case out of dh and into a python-support
     sequence addon. --with=python-support is enabled by default to avoid
     breaking backwards compatability.
 debhelper (7.0.7) unstable; urgency=low
   * dh_installxfonts: Fix precidence problem that exposes a new warning
     message in perl 5.10.
 debhelper (7.0.6) unstable; urgency=low
   * dh_auto_test: Correct Module::Build tests.
 debhelper (7.0.5) unstable; urgency=low
   * Convert copyright file to new format.
   * dh_test*: inhibit logging. Closes: #478958
 debhelper (7.0.4) unstable; urgency=low
   * Fix underescaped $ in Makefile. Closes: #478475
   * dh_auto_test: Run tests for Module::Build packages. (Florian Ragwitz)
 debhelper (7.0.3) unstable; urgency=low
   * dh: Fix man page typos. Closes: #477933
   * Add missing $! to error message when the log can't be opened.
   * One problem with the log files is that if dh_clean is not the last command
     run, they will be left behind. This is a particular problem on build
     daemons that use real root. Especially if cdbs is used, since it runs
     dh_listpackages after clean, thereby leaving behind log files that
     only root can touch. Avoid this particular special case by inhibiting
     logging by dh_listpackages.
 debhelper (7.0.2) unstable; urgency=low
   * dh: Optimise the case where the binary-arch or binary-indep sequence is
     run and there are no packages of that type.
   * dh_auto_configure: Set PERL_MM_USE_DEFAULT when configuring MakeMaker
     packages to avoid interactive prompts.
   * dh_auto_*: Also support packages using Module::Build.
   * dh_auto_*: Fix some calls to setup.py. Now tested and working with
     python packages.
   * dh_install: Find all possible cases of "changelog" and "changes", rather
     than just looking for some predefined common cases.
 debhelper (7.0.1) unstable; urgency=low
   * I lied, one more v7 change slipped in..
   * dh_installchangelogs: In v7 mode, if no upstream changelog is specified,
     and the package is not native, guess at a few common changelog filenames.
 debhelper (7.0.0) unstable; urgency=low
   * dh: New program that runs a series of debhelper commands in a sequence.
     This can be used to construct very short rules files (as short as 3
     lines), while still exposing the full power of debhelper when it's
   * dh_auto_configure: New program, automates running ./configure,
     Makefile.PL, and python distutils. Calls them with exactly the same
     options as cdbs does by default, and allows adding/overriding options.
   * dh_auto_build: New program, automates building the package by either
     running make or using setup.py. (Support for cmake and other build systems
     planned but not yet implemented.)
   * dh_auto_test: New program, automates running make test or make check
     if the Makefile has such a target.
   * dh_auto_clean: New program, automates running make clean (or distclean,
     or realclean), or using setup.py to clean up.
   * dh_auto_install: New program, automates running make install, or using
     setup.py to install. Supports the PREFIX=/usr special case needed by
     MakeMaker Makefiles. (Support for cmake and other build systems planned
     but not yet implemented.)
   * New v7 mode, which only has three changes from v6, and is the new
     recommended default, especially when using dh.
   * dh_install: In v7 mode, if --sourcedir is not specified, first look for
     files in debian/tmp, and then will look in the current directory. This
     allows dh_install to interoperate with dh_auto_install without needing any
     special parameters.
   * dh_clean: In v7 mode, read debian/clean and delete all files listed
   * dh_clean: In v7 mode, automatically delete *-stamp files.
   * Add a Makefile and simplify this package's own rules file using
     all the new toys.
   * dh_clean: Don't delete core dumps. (Too DWIM, and "core" is not
     necessarily a core dump.) Closes: #477391
   * dh_prep: New program, does the same as dh_clean -k (which will be
     deprecated later).
 debhelper (6.0.12) unstable; urgency=low
   * dh_icons: Support .xpm format icons. Stop looking for .jpg icons, and
     also, for completeness, support .icon files. This matches the set of
     extensions supported by gtk-update-icon-cache. Closes: #448094
 debhelper (6.0.11) unstable; urgency=medium
   * dh_installman: man --recode transparently uncompresses compressed
     pages. So when saving the output back, save it to a non-compressed
     filename (and delete the original, compressed file). Closes: #470913
 debhelper (6.0.10) unstable; urgency=low
   * dh_perl: Remove empty directories created by MakeMaker.
 debhelper (6.0.9) unstable; urgency=low
   * dh_installman: Don't recode symlinks. Closes: #471196
 debhelper (6.0.8) unstable; urgency=low
   * dh_installman: Convert all man pages in the build directory to utf-8, not
     just those installed by the program.
 debhelper (6.0.7) unstable; urgency=low
   * dh_lintian: Finally added this since linda is gone and there's only
     lintian to worry about supporting. Closes: #109642, #166320, #206765
     (Thanks to Steve M. Robbins for the initial implementation.)
 debhelper (6.0.6) unstable; urgency=low
   * dh_compress: Pass -n to gzip to yeild more reproducible file contents.
     The time stamp information need not be contained in the .gz file since the
     time stamp is preserved when compressing and decompressing. Closes: #467100
   * The order of dependencies generated by debhelper has been completly random
     (hash key order), so sort it. Closes: #468959
 debhelper (6.0.5) unstable; urgency=low
   * dh_installman: Recode all man pages to utf-8 on installation.
     Closes: #462937 (Colin Watson)
   * Depend on a new enough version of man-db.
 debhelper (6.0.4) unstable; urgency=low
   * dh_strip: Improve the idempotency fix put in for #380314.
   * dh_strip: The -k flag didn't work (--keep did). Fix.
   * dh_shlibdeps: Add emul to exclude list.
 debhelper (6.0.3) unstable; urgency=low
   * dh_link: -X can be used to avoid it modifying symlinks to be compliant
     with policy. Closes: #461392
   * dh_shlibdeps: Rather than skipping everything in /usr/lib/debug,
     which can include debug libraries that dpkg-shlibdeps should look at,
     only skip the subdirectories of it that contain separate debugging
     symbols. (Hardcoding the names of those directories is not the best
     implementation, but it will do for now.) Closes: #461339
 debhelper (6.0.2) unstable; urgency=low
   * Revert slightly broken refactoring of some exclude code.
     Closes: #460340, #460351
 debhelper (6.0.1) unstable; urgency=low
   * dh_installdocs/examples: Don't unnecessarily use the exclude code path.
   * dh_install{,docs,examples}: Avoid infinite recursion when told to
     install a directory ending with "/." (slashdot effect?) when exclusion is
     enabled. Emulate the behavior of cp in this case. Closes: #253234
   * dh_install: Fix #459426 here too.
 debhelper (6.0.0) unstable; urgency=low
   * dh_gencontrol: Stop passing -isp, it's the default now. Closes: #458114
   * dh_shlibdeps: Update documentation for -L and -l. dpkg-shlibdeps is now
     much smarter, and these options are almost never needed. Closes: #459226
   * dh_shlibdeps: If a relative path is specified in -l, don't prepend the pwd
     to it, instead just prepend a slash to make it absolute. dpkg-shlibdeps
     has changed how it used LD_LIBRARY_PATH, so making it point into the
     package build directory won't work.
   * dh_shlibdeps: Change "-L pkg" to cause "-Sdebian/pkg" to be passed to
     dpkg-shlibdeps. The old behavior of passing -L to dpkg-shlibdeps didn't
     affect where it looked for symbols files. Closes: #459224
   * Depend on dpkg-dev 1.14.15, the first to support dpkg-shlibdeps -S.
   * dh_installdocs, dh_installexamples: Support files with spaces in exclude
     mode. Closes: #459426
   * debhelper v6 mode is finalised and is the new recommended compatibility
 debhelper (5.0.63) unstable; urgency=low
   * dh_installdocs: Tighten doc-base document id parsing to only accept
     the characters that the doc-base manual allows in the id. Closes: #445541
 debhelper (5.0.62) unstable; urgency=low
   * Remove execute bit from desktop files in /usr/share/applications.
     Closes: #452337
   * Fix man page names of translated debhelper(7) man pages.
     Patch from Frédéric Bothamy. Closes: 453051
   * dh_makeshlibs: Use new -I flag to specify symbol files, necessary to
     properly support includes. Closes: #452717
   * Increase dpkg-dev dependency to 1.14.12 to ensure that dh_makeshlibs
     isn't used with an old dpkg-gensymbols that doesn't support -I.
 debhelper (5.0.61) unstable; urgency=low
   * Man page fix re v4. Closes: #450608
   * dh_makeshlibs: Support symbols files. Closes: #443978
     Packages using this support should build-depend on dpkg-dev (>= 1.14.8).
     Symbols files can be downloaded from mole:
 49a2091d6c6cebe4703e8924634803a2 587 devel optional debhelper_7.0.15~bpo40+1.dsc
 85cf42b1c2b4924b102371966549e3aa 293764 devel optional debhelper_7.0.15~bpo40+1.tar.gz
 1ae71ab62aabfcc0318f735f2dd335a4 554186 devel optional debhelper_7.0.15~bpo40+1_all.deb

Version: GnuPG v1.4.9 (GNU/Linux)


  to pool/main/d/debhelper/debhelper_7.0.15~bpo40+1.dsc
  to pool/main/d/debhelper/debhelper_7.0.15~bpo40+1.tar.gz
  to pool/main/d/debhelper/debhelper_7.0.15~bpo40+1_all.deb

Reply to: