Accepted debhelper 7.0.17~bpo40+1 (source all)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Tue, 02 Sep 2008 17:06:41 +0200
Source: debhelper
Binary: debhelper
Architecture: source all
Version: 7.0.17~bpo40+1
Distribution: etch-backports
Urgency: medium
Maintainer: Joey Hess <joeyh@debian.org>
Changed-By: Romain Beauxis <toots@rastageeks.org>
Description:
debhelper - helper programs for debian/rules
Closes: 109642 166320 206765 253234 443978 445541 448094 450608 452337 452717 453051 458114 459224 459226 459426 460340 460351 461339 461392 462937 467100 468959 470913 471060 471196 477391 477933 478475 478958 479647 480191 480200 481899 484772 485116 486327 486439 486464 487938 489918 490886 490937 492719 493062 496157
Changes:
debhelper (7.0.17~bpo40+1) etch-backports; urgency=low
.
* Rebuild for etch-backports.
.
debhelper (7.0.17) unstable; urgency=low
.
[ Per Olofsson ]
* dh_auto_install: Fix man page, was referring to dh_auto_clean.
.
[ Joey Hess ]
* dh_gencontrol: Drop the Homepage field from udebs. Closes: #492719
* Typo. Closes: #493062
* dh_auto_install: Improve check for MakeMaker, to avoid passing PREFIX
if the Makefile was generated by Module::Build::Compat. Closes: #496157
.
debhelper (7.0.16) unstable; urgency=low
.
* dh: Avoid passing --with on to subcommands. Closes: #490886
* dh_installchangelogs: When searching for changelog in v7 mode, skip
empty files. Closes: #490937
.
debhelper (7.0.15) unstable; urgency=low
.
* dh_clean: Do not delete *-stamp files in -k mode in v7. Closes: #489918
.
debhelper (7.0.14) unstable; urgency=low
.
* Load python-support sequence file first, to allow ones loaded later to
disable it.
.
debhelper (7.0.13) unstable; urgency=low
.
* dh_auto_install: Rather than looking at the number of binary packages
being acted on, look at the total number of binary packages in the
source package when deciding whether to install to debian/package or
debian/tmp. This avoids inconsistencies when building mixed arch all+any
packages using the binary-indep and binary-arch targets.
Closes: #487938
.
debhelper (7.0.12) unstable; urgency=medium
.
* Correct docs about dh_install and debian/tmp in v7 mode. It first looks in
the current directory, or whatever is configured with --srcdir. Then it
always falls back to looking in debian/tmp.
* Medium urgency to get this doc fix into testing.
.
debhelper (7.0.11) unstable; urgency=low
.
* dh: Man page fix. Closes: #485116
* Add stamp files to example rules targets. Closes: #486327
* Add a build dependency on file. The rules file now runs dh_strip and
dh_shlibdeps, which both use it. (It could be changed not to, but
it's good to have it run all the commands as a test.) Closes: #486439
* Typo fix. Closes: #486464
.
debhelper (7.0.10) unstable; urgency=low
.
* dh_compress: Do not compress index.sgml files, as generated by gtk-doc.
Closes: #484772
.
debhelper (7.0.9) unstable; urgency=low
.
* rules.tiny: Typo fix. Closes: #479647
* dh_installinit: Add --restart-after-upgrade, which avoids stopping a
daemon in the prerm, and instead restarts it in the postinst, keeping
its downtime minimal. Since some daemons could break if files are upgraded
while they're running, it's not the default. It might become the default
in a future (v8) compatibility level. Closes: #471060
* dh: fix POD error. Closes: #480191
* dh: Typo fixes. Closes: #480200
* dh: Add remove_command to the sequence interface.
* dh_auto_clean: setup.py clean can create pyc files. Remove. Closes: #481899
.
debhelper (7.0.8) unstable; urgency=low
.
* dh: Add an interface that third-party packages providing debhelper commands
can use to insert them into a command sequence.
(See dh(1), "SEQUENCE ADDONS".)
* dh: --with=foo can be used to include such third-party commands.
So, for example, --with=cli could add the dh_cli* commands from
cli-common.
* Moved python-support special case out of dh and into a python-support
sequence addon. --with=python-support is enabled by default to avoid
breaking backwards compatability.
.
debhelper (7.0.7) unstable; urgency=low
.
* dh_installxfonts: Fix precidence problem that exposes a new warning
message in perl 5.10.
.
debhelper (7.0.6) unstable; urgency=low
.
* dh_auto_test: Correct Module::Build tests.
.
debhelper (7.0.5) unstable; urgency=low
.
* Convert copyright file to new format.
* dh_test*: inhibit logging. Closes: #478958
.
debhelper (7.0.4) unstable; urgency=low
.
* Fix underescaped $ in Makefile. Closes: #478475
* dh_auto_test: Run tests for Module::Build packages. (Florian Ragwitz)
.
debhelper (7.0.3) unstable; urgency=low
.
* dh: Fix man page typos. Closes: #477933
* Add missing $! to error message when the log can't be opened.
* One problem with the log files is that if dh_clean is not the last command
run, they will be left behind. This is a particular problem on build
daemons that use real root. Especially if cdbs is used, since it runs
dh_listpackages after clean, thereby leaving behind log files that
only root can touch. Avoid this particular special case by inhibiting
logging by dh_listpackages.
.
debhelper (7.0.2) unstable; urgency=low
.
* dh: Optimise the case where the binary-arch or binary-indep sequence is
run and there are no packages of that type.
* dh_auto_configure: Set PERL_MM_USE_DEFAULT when configuring MakeMaker
packages to avoid interactive prompts.
* dh_auto_*: Also support packages using Module::Build.
* dh_auto_*: Fix some calls to setup.py. Now tested and working with
python packages.
* dh_install: Find all possible cases of "changelog" and "changes", rather
than just looking for some predefined common cases.
.
debhelper (7.0.1) unstable; urgency=low
.
* I lied, one more v7 change slipped in..
* dh_installchangelogs: In v7 mode, if no upstream changelog is specified,
and the package is not native, guess at a few common changelog filenames.
.
debhelper (7.0.0) unstable; urgency=low
.
* dh: New program that runs a series of debhelper commands in a sequence.
This can be used to construct very short rules files (as short as 3
lines), while still exposing the full power of debhelper when it's
needed.
* dh_auto_configure: New program, automates running ./configure,
Makefile.PL, and python distutils. Calls them with exactly the same
options as cdbs does by default, and allows adding/overriding options.
* dh_auto_build: New program, automates building the package by either
running make or using setup.py. (Support for cmake and other build systems
planned but not yet implemented.)
* dh_auto_test: New program, automates running make test or make check
if the Makefile has such a target.
* dh_auto_clean: New program, automates running make clean (or distclean,
or realclean), or using setup.py to clean up.
* dh_auto_install: New program, automates running make install, or using
setup.py to install. Supports the PREFIX=/usr special case needed by
MakeMaker Makefiles. (Support for cmake and other build systems planned
but not yet implemented.)
* New v7 mode, which only has three changes from v6, and is the new
recommended default, especially when using dh.
* dh_install: In v7 mode, if --sourcedir is not specified, first look for
files in debian/tmp, and then will look in the current directory. This
allows dh_install to interoperate with dh_auto_install without needing any
special parameters.
* dh_clean: In v7 mode, read debian/clean and delete all files listed
therein.
* dh_clean: In v7 mode, automatically delete *-stamp files.
* Add a Makefile and simplify this package's own rules file using
all the new toys.
* dh_clean: Don't delete core dumps. (Too DWIM, and "core" is not
necessarily a core dump.) Closes: #477391
* dh_prep: New program, does the same as dh_clean -k (which will be
deprecated later).
.
debhelper (6.0.12) unstable; urgency=low
.
* dh_icons: Support .xpm format icons. Stop looking for .jpg icons, and
also, for completeness, support .icon files. This matches the set of
extensions supported by gtk-update-icon-cache. Closes: #448094
.
debhelper (6.0.11) unstable; urgency=medium
.
* dh_installman: man --recode transparently uncompresses compressed
pages. So when saving the output back, save it to a non-compressed
filename (and delete the original, compressed file). Closes: #470913
.
debhelper (6.0.10) unstable; urgency=low
.
* dh_perl: Remove empty directories created by MakeMaker.
.
debhelper (6.0.9) unstable; urgency=low
.
* dh_installman: Don't recode symlinks. Closes: #471196
.
debhelper (6.0.8) unstable; urgency=low
.
* dh_installman: Convert all man pages in the build directory to utf-8, not
just those installed by the program.
.
debhelper (6.0.7) unstable; urgency=low
.
* dh_lintian: Finally added this since linda is gone and there's only
lintian to worry about supporting. Closes: #109642, #166320, #206765
(Thanks to Steve M. Robbins for the initial implementation.)
.
debhelper (6.0.6) unstable; urgency=low
.
* dh_compress: Pass -n to gzip to yeild more reproducible file contents.
The time stamp information need not be contained in the .gz file since the
time stamp is preserved when compressing and decompressing. Closes: #467100
* The order of dependencies generated by debhelper has been completly random
(hash key order), so sort it. Closes: #468959
.
debhelper (6.0.5) unstable; urgency=low
.
* dh_installman: Recode all man pages to utf-8 on installation.
Closes: #462937 (Colin Watson)
* Depend on a new enough version of man-db.
.
debhelper (6.0.4) unstable; urgency=low
.
* dh_strip: Improve the idempotency fix put in for #380314.
* dh_strip: The -k flag didn't work (--keep did). Fix.
* dh_shlibdeps: Add emul to exclude list.
.
debhelper (6.0.3) unstable; urgency=low
.
* dh_link: -X can be used to avoid it modifying symlinks to be compliant
with policy. Closes: #461392
* dh_shlibdeps: Rather than skipping everything in /usr/lib/debug,
which can include debug libraries that dpkg-shlibdeps should look at,
only skip the subdirectories of it that contain separate debugging
symbols. (Hardcoding the names of those directories is not the best
implementation, but it will do for now.) Closes: #461339
.
debhelper (6.0.2) unstable; urgency=low
.
* Revert slightly broken refactoring of some exclude code.
Closes: #460340, #460351
.
debhelper (6.0.1) unstable; urgency=low
.
* dh_installdocs/examples: Don't unnecessarily use the exclude code path.
* dh_install{,docs,examples}: Avoid infinite recursion when told to
install a directory ending with "/." (slashdot effect?) when exclusion is
enabled. Emulate the behavior of cp in this case. Closes: #253234
* dh_install: Fix #459426 here too.
.
debhelper (6.0.0) unstable; urgency=low
.
* dh_gencontrol: Stop passing -isp, it's the default now. Closes: #458114
* dh_shlibdeps: Update documentation for -L and -l. dpkg-shlibdeps is now
much smarter, and these options are almost never needed. Closes: #459226
* dh_shlibdeps: If a relative path is specified in -l, don't prepend the pwd
to it, instead just prepend a slash to make it absolute. dpkg-shlibdeps
has changed how it used LD_LIBRARY_PATH, so making it point into the
package build directory won't work.
* dh_shlibdeps: Change "-L pkg" to cause "-Sdebian/pkg" to be passed to
dpkg-shlibdeps. The old behavior of passing -L to dpkg-shlibdeps didn't
affect where it looked for symbols files. Closes: #459224
* Depend on dpkg-dev 1.14.15, the first to support dpkg-shlibdeps -S.
* dh_installdocs, dh_installexamples: Support files with spaces in exclude
mode. Closes: #459426
* debhelper v6 mode is finalised and is the new recommended compatibility
level.
.
debhelper (5.0.63) unstable; urgency=low
.
* dh_installdocs: Tighten doc-base document id parsing to only accept
the characters that the doc-base manual allows in the id. Closes: #445541
.
debhelper (5.0.62) unstable; urgency=low
.
* Remove execute bit from desktop files in /usr/share/applications.
Closes: #452337
* Fix man page names of translated debhelper(7) man pages.
Patch from Frédéric Bothamy. Closes: 453051
* dh_makeshlibs: Use new -I flag to specify symbol files, necessary to
properly support includes. Closes: #452717
* Increase dpkg-dev dependency to 1.14.12 to ensure that dh_makeshlibs
isn't used with an old dpkg-gensymbols that doesn't support -I.
.
debhelper (5.0.61) unstable; urgency=low
.
* Man page fix re v4. Closes: #450608
* dh_makeshlibs: Support symbols files. Closes: #443978
Packages using this support should build-depend on dpkg-dev (>= 1.14.8).
Symbols files can be downloaded from mole:
http://qa.debian.org/cgi-bin/mole/seedsymbols
Files:
2f4c973447bfd6b47b4b2a123aff7cd9 839 devel optional debhelper_7.0.17~bpo40+1.dsc
63704e64af293de854def835cb2f37d5 292959 devel optional debhelper_7.0.17~bpo40+1.tar.gz
7afa1c1ad95620a2003948153aeddebb 548022 devel optional debhelper_7.0.17~bpo40+1_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iQEcBAEBAgAGBQJIvVjVAAoJEAC5aaocqV0ZCfcH/0kNqVVfMNXCHNdPYKMob255
CwKTp7ln7AF5Y2BPObd/j6cL97oyy4Q/jWpb8LybRz6AC056CqqtF12jJT/uRmeh
m0W4RtSH+ORAlaXWY/IYHlXFFuIIfSNmXixMIc479wWZJV41jD1zRjYj2QfiNE60
gsZ9ih34eZJhTzNFwFkBhGP24AkxoC8CuJKL9y9t/UPrdEZatfwmPJlqgvAG6q49
KAz8TTOpuIYmsR3e6VWlGPMJQFHmqahsvX2Q1CTujmFt9BpWcl17/hqJwlbNtU5/
Uk5mUmrrLeoWygJuvPmzrjmZxwO66c9Bd6GPcVZlCRcSrG/GyrJoOea3nS0do8g=
=jthx
-----END PGP SIGNATURE-----
Accepted:
debhelper_7.0.17~bpo40+1.dsc
to pool/main/d/debhelper/debhelper_7.0.17~bpo40+1.dsc
debhelper_7.0.17~bpo40+1.tar.gz
to pool/main/d/debhelper/debhelper_7.0.17~bpo40+1.tar.gz
debhelper_7.0.17~bpo40+1_all.deb
to pool/main/d/debhelper/debhelper_7.0.17~bpo40+1_all.deb
Reply to: