TS219 : HDD #2 not seen
Hi,
I have a QNAP TS219 running Debian 10, installed thanks to the excellent
tutorial of Martin Michlmayr.
It has been successfully running for a while with only one 120GB SSD in
tray #1.
I am now trying to add another HDD (WD Red 2TB) in tray #2 to store
additional data.
But this second disk is not recognized.
The tray#1 led blinks briefly early during the boot and then remains off.
The disk does not appear in lsblk output and the dmesg states "ata1:
SATA link down (SStatus 0 SControl F300)"
I have tried another HDD (Seagate 4TB) : same symptom
I have tried to swap the trays : same symptom (except the leds are
inverted) -> this should eliminate hardware issues I think?
Does anyone have idea of what I could further investigate?
Thanks in advance for your support
Best
Ewen
Full dmesg :
----------------------------------------------------------------------------------------------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.0-19-marvell
(debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1
Debian 4.19.232-1 (2022-03-07)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE),
cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt: Machine model: QNAP TS219 family
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from
start_kernel+0x78/0x4ac with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram
initrd=0xa00000,0x900000 ramdisk=32768
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 504420K/524288K available (3991K kernel code,
342K rwdata, 1040K rodata, 312K init, 219K bss, 19868K reserved, 0K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (3993 kB)
.init : 0x(ptrval) - 0x(ptrval) ( 312 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 343 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 220 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 19000 entries in 56 pages
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps
every 10737418237ns
[ 0.000040] Switching to timer-based delay loop, resolution 5ns
[ 0.000130] Calibrating delay loop (skipped), value calculated using
timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.000153] pid_max: default: 32768 minimum: 301
[ 0.000410] Security Framework initialized
[ 0.000429] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000547] AppArmor: AppArmor initialized
[ 0.000671] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.001631] CPU: Testing write buffer coherency: ok
[ 0.002605] Setting up static identity map for 0x8200 - 0x823c
[ 0.002840] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[ 0.004648] devtmpfs: initialized
[ 0.007742] VFP support v0.3: not present
[ 0.007894] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.007919] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.008231] pinctrl core: initialized pinctrl subsystem
[ 0.009321] NET: Registered protocol family 16
[ 0.009727] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.010339] audit: initializing netlink subsys (disabled)
[ 0.011109] cpuidle: using governor ladder
[ 0.011125] cpuidle: using governor menu
[ 0.011457] Feroceon L2: Enabling L2
[ 0.011499] Feroceon L2: Cache support initialised.
[ 0.011730] [Firmware Info]:
/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0:
local-mac-address is not set
[ 0.015563] No ATAGs?
[ 0.016077] audit: type=2000 audit(0.008:1): state=initialized
audit_enabled=0 res=1
[ 0.019847] clocksource: Switched to clocksource orion_clocksource
[ 0.042938] VFS: Disk quotas dquot_6.6.0
[ 0.043015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.043496] AppArmor: AppArmor Filesystem Enabled
[ 0.044624] NET: Registered protocol family 2
[ 0.044793] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.045605] tcp_listen_portaddr_hash hash table entries: 512 (order:
0, 4096 bytes)
[ 0.045635] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.045688] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.045738] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.045829] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.045853] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.046027] NET: Registered protocol family 1
[ 0.046063] PCI: CLS 0 bytes, default 32
[ 0.046281] Unpacking initramfs...
[ 0.583932] Freeing initrd memory: 9216K
[ 0.584765] Initialise system trusted keyrings
[ 0.584815] Key type blacklist registered
[ 0.584984] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.589679] zbud: loaded
[ 0.591409] Key type asymmetric registered
[ 0.591422] Asymmetric key parser 'x509' registered
[ 0.591473] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 0.591625] io scheduler noop registered
[ 0.591912] io scheduler cfq registered (default)
[ 0.593387] kirkwood-pinctrl f1010000.pin-controller: registered
pinctrl driver
[ 0.594968] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge
to bus 0000:00
[ 0.594987] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.595000] pci_bus 0000:00: root bus resource [mem
0xe0000000-0xefffffff]
[ 0.595012] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.595094] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[ 0.596190] PCI: bus0: Fast back to back transfers disabled
[ 0.596209] pci 0000:00:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.596341] pci 0000:01:00.0: [197b:2363] type 00 class 0x010601
[ 0.596430] pci 0000:01:00.0: reg 0x24: [mem 0x40000000-0x40001fff]
[ 0.596446] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.596509] pci 0000:01:00.0: PME# supported from D3hot
[ 0.596677] pci 0000:01:00.1: [197b:2363] type 00 class 0x010185
[ 0.596707] pci 0000:01:00.1: [Firmware Bug]: reg 0x10: invalid BAR
(can't size)
[ 0.596724] pci 0000:01:00.1: [Firmware Bug]: reg 0x14: invalid BAR
(can't size)
[ 0.596740] pci 0000:01:00.1: [Firmware Bug]: reg 0x18: invalid BAR
(can't size)
[ 0.596755] pci 0000:01:00.1: [Firmware Bug]: reg 0x1c: invalid BAR
(can't size)
[ 0.596770] pci 0000:01:00.1: [Firmware Bug]: reg 0x20: invalid BAR
(can't size)
[ 0.597855] PCI: bus1: Fast back to back transfers disabled
[ 0.597873] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.598059] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.598078] pci 0000:01:00.0: BAR 6: assigned [mem
0xe0000000-0xe000ffff pref]
[ 0.598091] pci 0000:01:00.0: BAR 5: assigned [mem 0xe0010000-0xe0011fff]
[ 0.598106] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.598120] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.598198] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.598242] pci 0000:01:00.0: async suspend disabled to avoid
multi-function power-on ordering issue
[ 0.598271] pci 0000:01:00.1: async suspend disabled to avoid
multi-function power-on ordering issue
[ 0.598688] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.628714] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor
cpy intr )
[ 0.628902] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.656717] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor
cpy intr )
[ 0.657050] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.657990] console [ttyS0] disabled
[ 0.658051] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27,
base_baud = 12500000) is a 16550A
[ 1.314948] console [ttyS0] enabled
[ 1.319036] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28,
base_baud = 12500000) is a 16550A
[ 1.328055] random: fast init done
[ 1.332163] i2c /dev entries driver
[ 1.336983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.343969] registered taskstats version 1
[ 1.348104] Loading compiled-in X.509 certificates
[ 1.378835] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.412109] Loaded X.509 cert 'Debian Secure Boot Signer 2021 -
linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.422440] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.429258] hctosys: unable to open rtc device (rtc0)
[ 1.438279] Freeing unused kernel memory: 312K
[ 1.442769] This architecture does not have kernel memory protection.
[ 1.449248] Run /init as init process
[ 1.902774] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[ 1.979219] SCSI subsystem initialized
[ 2.036987] libata version 3.00 loaded.
[ 2.039331] sata_mv f1080000.sata: version 1.28
[ 2.039581] sata_mv f1080000.sata: slots 32 ports 2
[ 2.053967] scsi host0: sata_mv
[ 2.059661] scsi host1: sata_mv
[ 2.063804] ata1: SATA max UDMA/133 irq 35
[ 2.067948] ata2: SATA max UDMA/133 irq 35
[ 2.386186] ata1: SATA link down (SStatus 0 SControl F300)
[ 2.863873] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 2.894185] ata2.00: ATA-8: KINGSTON SH100S3120G, 503ABBF0, max UDMA/133
[ 2.900937] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.930175] ata2.00: configured for UDMA/133
[ 2.934811] scsi 1:0:0:0: Direct-Access ATA KINGSTON SH100S3
BBF0 PQ: 0 ANSI: 5
[ 2.973711] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120
GB/112 GiB)
[ 2.984210] sd 1:0:0:0: [sda] Write Protect is off
[ 2.989062] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.989152] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.002380] sda: sda1 sda2 sda3 < sda5 >
[ 3.010314] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.465341] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 3.805978] systemd[1]: System time before build time, advancing clock.
[ 3.838993] systemd[1]: Inserted module 'autofs4'
[ 3.885114] NET: Registered protocol family 10
[ 3.990796] Segment Routing with IPv6
[ 4.014481] systemd[1]: systemd 241 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN
-PCRE2 default-hierarchy=hybrid)
[ 4.036502] systemd[1]: Detected architecture arm.
[ 4.064452] systemd[1]: Set hostname to <qnap219-1>.
[ 5.139615] systemd[1]: File
/lib/systemd/system/systemd-journald.service:12 configures an IP
firewall (IPAddressDeny=any), but the local system does not support
BPF/cgroup based firewalling.
[ 5.156797] systemd[1]: Proceeding WITHOUT firewalling in effect!
(This warning is only shown for the first loaded unit using IP firewalling.)
[ 5.526875] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.545589] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.553511] systemd[1]: Listening on Journal Socket.
[ 5.572104] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.579442] systemd[1]: Listening on Syslog Socket.
[ 5.600771] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.631420] systemd[1]: Mounting Kernel Debug File System...
[ 5.657332] systemd[1]: Listening on Journal Audit Socket.
[ 5.826718] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.322179] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 7.152427] systemd-journald[141]: Received request to flush runtime
journal from PID 1
[ 7.830156] ahci 0000:01:00.0: version 3.0
[ 7.840469] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps
0x3 impl SATA mode
[ 7.848634] ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio
slum part
[ 7.939622] orion_wdt: Initial timeout 21 sec
[ 8.003723] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.060007] scsi host2: ahci
[ 8.068504] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[ 8.095675] scsi host3: ahci
[ 8.111970] marvell-cesa f1030000.crypto: CESA device successfully
registered
[ 8.132258] ata3: SATA max UDMA/133 abar m8192@0xe0010000 port
0xe0010100 irq 40
[ 8.139724] ata4: SATA max UDMA/133 abar m8192@0xe0010000 port
0xe0010180 irq 40
[ 8.180058] usbcore: registered new interface driver usbfs
[ 8.207968] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 8.224695] usbcore: registered new interface driver hub
[ 8.256852] usbcore: registered new device driver usb
[ 8.462820] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.468498] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.482730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.568924] m25p80 spi0.0: m25p128 (16384 Kbytes)
[ 8.595022] ehci-orion: EHCI orion driver
[ 8.648138] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.675919] rtc-mv f1010300.rtc: internal RTC not ticking
[ 8.711971] orion-ehci f1050000.ehci: new USB bus registered,
assigned bus number 1
[ 8.795225] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.887919] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.927349] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 4.19
[ 8.935702] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.942987] usb usb1: Product: EHCI Host Controller
[ 8.947906] usb usb1: Manufacturer: Linux 4.19.0-19-marvell ehci_hcd
[ 8.954312] usb usb1: SerialNumber: f1050000.ehci
[ 8.975887] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.982293] Creating 6 MTD partitions on "spi0.0":
[ 9.000609] 0x000000000000-0x000000080000 : "U-Boot"
[ 9.018803] 0x000000200000-0x000000400000 : "Kernel"
[ 9.029017] 0x000000400000-0x000000d00000 : "RootFS1"
[ 9.041354] 0x000000d00000-0x000001000000 : "RootFS2"
[ 9.050489] hub 1-0:1.0: USB hub found
[ 9.055819] 0x000000080000-0x0000000c0000 : "U-Boot Config"
[ 9.064347] hub 1-0:1.0: 1 port detected
[ 9.116319] 0x0000000c0000-0x000000200000 : "NAS Config"
[ 9.228723] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC
address 00:08:9b:bd:31:90
[ 9.363914] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.573741] usb 1-1: New USB device found, idVendor=05e3,
idProduct=0608, bcdDevice= 9.01
[ 9.581999] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 9.589203] usb 1-1: Product: USB2.0 Hub
[ 9.637649] hub 1-1:1.0: USB hub found
[ 9.652268] hub 1-1:1.0: 4 ports detected
[ 10.328102] Adding 499708k swap on /dev/sda5. Priority:-2 extents:1
across:499708k SSFS
[ 11.495822] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 11.514953] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
[ 11.878022] audit: type=1400 audit(1550139126.068:2):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/sbin/cups-browsed" pid=220 comm="apparmor_parser"
[ 11.929541] audit: type=1400 audit(1550139126.120:3):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe" pid=221 comm="apparmor_parser"
[ 11.997249] audit: type=1400 audit(1550139126.120:4):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="nvidia_modprobe//kmod" pid=221 comm="apparmor_parser"
[ 12.095210] audit: type=1400 audit(1550139126.284:5):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=224 comm="apparmor_parser"
[ 12.156055] audit: type=1400 audit(1550139126.284:6):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/sbin/cupsd" pid=224 comm="apparmor_parser"
[ 12.223923] audit: type=1400 audit(1550139126.284:7):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/sbin/cupsd//third_party" pid=224 comm="apparmor_parser"
[ 12.309906] audit: type=1400 audit(1550139126.384:8):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/bin/man" pid=225 comm="apparmor_parser"
[ 12.399625] audit: type=1400 audit(1550139126.384:9):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_filter" pid=225 comm="apparmor_parser"
[ 12.478421] audit: type=1400 audit(1550139126.384:10):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_groff" pid=225 comm="apparmor_parser"
[ 13.519422] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.727676] NET: Registered protocol family 17
[ 15.067905] random: crng init done
[ 15.071333] random: 7 urandom warning(s) missed due to ratelimiting
[ 16.658086] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000
Mb/s, full duplex, flow control disabled
[ 16.668030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[33441.768928] lvm2-activation-generator: lvmconfig failed
[33441.808580] lvm2-activation-generator: Activation generator failed.
[33444.348791] lvm2-activation-generator: lvmconfig failed
[33444.396450] lvm2-activation-generator: Activation generator failed.
----------------------------------------------------------------------------------------------------
Reply to: