4.5.0-0.bpo.2-armmp does not boot on cubox-i
Hello,
after the upgrade to kernel 4.5.0-0.bpo.2-armmp, my cubox-i does not boot
anymore. Can anybody tell if I can easlily boot the previous kernel when I
enter u-boot (I used 4.5.0-0.bpo.1-armmp)?
Here is the output of the serial console, maybe somebody sees how I can make
the current kernel boot:
34233 bytes read in 224 ms (148.4 KiB/s)
15068303 bytes read in 889 ms (16.2 MiB/s)
Booting Debian 4.5.0-0.bpo.2-armmp from mmc 0:2...
Kernel image @ 0x10800000 [ 0x000000 - 0x369c98 ]
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
EHCI failed to shut down host controller.
Using Device Tree in place at 18000000, end 1800b5b8
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.5.0-0.bpo.2-armmp (debian-
kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian
4.5.3-2~bpo8+1 (2016-)
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: SolidRun Cubox-i Dual/Quad
[ 0.000000] cma: Reserved 16 MiB at 0x4f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ef6c2000 s20032 r8192 d20928
u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 260416
[ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2
rootfstype=ext4 ro rootwait console=ttymxc0,115200 console=tty1 elevator=noop
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 995060K/1048576K available (7305K kernel code, 923K
rwdata, 2536K rodata, 940K init, 394K bss, 37132K reserved, 16384K cma-
reserved, )
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc09a4a60 (9843 kB)
[ 0.000000] .init : 0xc09a5000 - 0xc0a90000 ( 940 kB)
[ 0.000000] .data : 0xc0a90000 - 0xc0b76d6c ( 924 kB)
[ 0.000000] .bss : 0xc0b79000 - 0xc0bdba8c ( 395 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every
715827882841ns
[ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 637086815595 ns
[ 0.002796] Console: colour dummy device 80x30
[ 0.003595] console [tty1] enabled
[ 0.003635] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6.00 BogoMIPS (lpj=12000)
[ 0.003685] pid_max: default: 32768 minimum: 301
[ 0.003898] Security Framework initialized
[ 0.003929] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003976] AppArmor: AppArmor disabled by boot time parameter
[ 0.004061] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004095] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.004930] Disabling memory control group subsystem
[ 0.005060] CPU: Testing write buffer coherency: ok
[ 0.005112] ftrace: allocating 25297 entries in 75 pages
[ 0.050647] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.050806] Setting up static identity map for 0x10008280 - 0x10008318
[ 0.056536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.056632] Brought up 2 CPUs
[ 0.056687] SMP: Total of 2 processors activated (12.00 BogoMIPS).
[ 0.056709] CPU: All CPU(s) started in SVC mode.
[ 0.057596] devtmpfs: initialized
[ 0.067395] VFP support v0.3: implementor 41 architecture 3 part 30 variant
9 rev 4
[ 0.068161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.069370] pinctrl core: initialized pinctrl subsystem
[ 0.070860] NET: Registered protocol family 16
[ 0.073679] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.075650] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.097978] No ATAGs?
[ 0.098025] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
watchpoint registers.
[ 0.098078] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.099701] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.100344] Serial: AMBA PL011 UART driver
[ 0.101326] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 0.119958] mxs-dma 110000.dma-apbh: initialized
[ 0.125206] vgaarb: loaded
[ 0.126586] media: Linux media interface: v0.10
[ 0.126671] Linux video capture interface: v2.00
[ 0.126794] pps_core: LinuxPPS API ver. 1 registered
[ 0.126817] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@linux.it>
[ 0.126873] PTP clock support registered
[ 0.128656] clocksource: Switched to clocksource mxc_timer1
[ 0.177260] VFS: Disk quotas dquot_6.6.0
[ 0.177383] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.192130] NET: Registered protocol family 2
[ 0.192965] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.193077] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.193216] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.193330] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.193400] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.193705] NET: Registered protocol family 1
[ 0.194279] Unpacking initramfs...
[ 1.283150] Freeing initrd memory: 14716K (c1800000 - c265f000)
[ 1.290035] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7
counters available
[ 1.292296] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.292441] audit: initializing netlink subsys (disabled)
[ 1.292524] audit: type=2000 audit(1.268:1): initialized
[ 1.293425] Initialise system trusted keyring
[ 1.293970] zbud: loaded
[ 1.296971] Key type asymmetric registered
[ 1.297015] Asymmetric key parser 'x509' registered
[ 1.297123] bounce: pool size: 64 pages
[ 1.297214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 1.297395] io scheduler noop registered (default)
[ 1.297427] io scheduler deadline registered
[ 1.297479] io scheduler cfq registered
[ 1.304905] imx-sdma 20ec000.sdma: firmware: failed to load imx/sdma/sdma-
imx6q.bin (-2)
[ 1.304957] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-
imx6q.bin failed with error -2
[ 1.310658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.313028] Serial: AMBA driver
[ 1.313876] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud
= 5000000) is a IMX
[ 1.952790] console [ttymxc0] enabled
[ 1.957482] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 292, base_baud
= 5000000) is a IMX
[ 1.970188] 2188000.ethernet supply phy not found, using dummy regulator
[ 1.985178] pps pps0: new PPS source ptp0
[ 1.994774] at803x: module verification failed: signature and/or required
key missing - tainting kernel
[ 2.008768] libphy: fec_enet_mii_bus: probed
[ 2.013717] fec 2188000.ethernet eth0: registered PHC device 0
[ 2.020501] mousedev: PS/2 mouse device common for all mice
[ 2.028517] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered
20cc000.snvs:snvs-r as rtc0
[ 2.040229] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.048780] NET: Registered protocol family 10
[ 2.054221] mip6: Mobile IPv6
[ 2.057269] NET: Registered protocol family 17
[ 2.061786] mpls_gso: MPLS GSO support
[ 2.066619] ThumbEE CPU extension supported.
[ 2.070973] Registering SWP/SWPB emulation handler
[ 2.076727] registered taskstats version 1
[ 2.080931] Loading compiled-in X.509 certificates
[ 2.088483] Loaded X.509 cert 'Debian Project: Ben Hutchings:
008a018dca80932630'
[ 2.096104] zswap: loaded using pool lzo/zbud
[ 2.101105] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.108292] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[ 2.114844] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to
1970-01-01 00:00:00 UTC (0)
[ 2.114900] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.142609] brcm_reg: disabling
[ 2.145823] usb_h1_vbus: disabling
[ 2.149265] usb_otg_vbus: disabling
[ 2.154139] Freeing unused kernel memory: 940K (c09a5000 - c0a90000)
[ 2.208182] systemd-udevd[67]: starting version 215
[ 2.216220] random: systemd-udevd urandom read with 1 bits of entropy
available
[ 2.347487] imx-gpc 20dc000.gpc: failed to get pu regulator: -517
[ 2.371131] sdhci: Secure Digital Host Controller Interface driver
[ 2.377432] sdhci: Copyright(c) Pierre Ossman
[ 2.386787] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.399859] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges
unspecified
[ 2.407120] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed
state, work on normal mode
[ 2.413764] SCSI subsystem initialized
[ 2.428034] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
[ 2.462617] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using
00000044
[ 2.470383] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using
00000000
[ 2.477946] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using
00002000
[ 2.485672] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using
05000000
[ 2.505581] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 2.512670] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps
0x1 impl platform mode
[ 2.521535] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp
pio slum part ccc apst
[ 2.532713] scsi host0: ahci-imx
[ 2.536791] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port
0x100 irq 295
[ 2.676735] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using
ADMA
[ 2.684578] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges
unspecified
[ 2.691795] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed
state, work on normal mode
[ 2.703061] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
[ 2.724385] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.731660] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.738934] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.747537] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.753279] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using
ADMA
[ 2.770369] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.812407] mmc1: host does not support reading read-only switch, assuming
write-enable
[ 2.826615] mmc1: new high speed SDHC card at address 59b4
[ 2.833896] mmcblk1: mmc1:59b4 USDU1 29.5 GiB
[ 2.840324] mmcblk1: p1 p2
[ 2.857707] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.863216] ahci-imx 2200000.sata: no device found, disabling link.
[ 2.869554] ahci-imx 2200000.sata: pass .hotplug=1 to enable hotplug
[ 2.881748] mmc0: new high speed SDIO card at address 0001
[ 33.137584] usbcore: registered new interface driver usbfs
[ 33.143254] usbcore: registered new interface driver hub
[ 33.148766] usbcore: registered new device driver usb
[ 33.156562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 33.163966] ehci-pci: EHCI PCI platform driver
[ 33.176239] ehci-orion: EHCI orion driver
[ 33.199923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 33.215088] hidraw: raw HID events driver (C) Jiri Kosina
[ 33.223084] usbcore: registered new interface driver usbhid
[ 33.228730] usbhid: USB HID core driver
--
Rainer Dorsch
http://bokomoko.de/
Reply to: