Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)
Thanks a lot for helping me out here.
I have managed to solve it, or at least found a workaround.
The system uses u-boot, and picks uImage and uInitrd from an external sd
card at boot time.
When I ran flash-kernel tool manually I saw that new uImage and uInitrd files were generated, but not in /boot. It says "using /dev/sda1 as boot device", but that is and internal sd card, not used.
/boot is on /dev/sdb1, so I simply mounted /dev/sda1 and copied the generated files to /boot, and after reboot the correct kernel is running. I am not sure this is the proper way to do it, but it works now.
This was the output before copying the new files:
# flash-kernel
Installing kirkwood-dreamplug.dtb into /boot/dtb-3.16.0-4-kirkwood
Taking backup of dtb-3.16.0-4-kirkwood.
Installing new dtb-3.16.0-4-kirkwood.
flash-kernel: installing version 3.16.0-4-kirkwood
Generating kernel u-boot image... done.
Will use /dev/sda1 as boot device.
Taking backup of uImage.
Installing new uImage.
Generating initramfs u-boot image... done.
Taking backup of uInitrd.
Installing new uInitrd.
Taking backup of dtb.
Installing new dtb.
# ls -l /boot
total 25406
-rw-r--r-- 1 root root 135743 Jan 18 02:38 config-3.16.0-4-kirkwood
lrwxrwxrwx 1 root root 21 Feb 15 23:38 dtb -> dtb-3.16.0-4-kirkwood
-rw-r--r-- 1 root root 10037 Feb 15 23:38 dtb-3.16.0-4-kirkwood
-rw-r--r-- 1 root root 10037 Feb 15 23:05 dtb-3.16.0-4-kirkwood.bak
lrwxrwxrwx 1 root root 28 Jul 24 2015 initrd.img ->
initrd.img-3.16.0-4-kirkwood
-rw-r--r-- 1 root root 10006903 Feb 14 23:51 initrd.img-3.16.0-4-kirkwood
drwx------ 2 root root 12288 Jul 24 2015 lost+found
-rw-r--r-- 1 root root 1621549 Jan 18 02:38 System.map-3.16.0-4-kirkwood
-rw-r--r-- 1 root root 2081989 Jul 25 2015 uImage
-rw-r--r-- 1 root root 9950850 Jul 25 2015 uInitrd
lrwxrwxrwx 1 root root 25 Jul 24 2015 vmlinuz ->
vmlinuz-3.16.0-4-kirkwood
-rw-r--r-- 1 root root 2074112 Jan 18 02:37 vmlinuz-3.16.0-4-kirkwood
BR
-Martin
Den 2016-02-15 kl. 14:07, skrev Uwe Kleine-König:
> Hallo,
>
> On 02/15/2016 01:29 PM, Martin Granehäll wrote:
> ...
> > _Kernel policy:_
> > linux-image-3.16.0-4-kirkwood:
> > Installed: 3.16.7-ckt20-1+deb8u3
> > Candidate: 3.16.7-ckt20-1+deb8u3
> > Version table:
> > *** 3.16.7-ckt20-1+deb8u3 0
> > 500 http://security.debian.org/ jessie/updates/main
>
> So you have a newer kernel installed than you are running. You might
> want to check your bootloader settings.
>
> Best regards
> Uwe
Reply to: