|
Hello, in the meantime I found out, that installer hangs if one ext2 file system is used for installation, i.e. / on ext2 file system with /boot as a normal subdirectory. Don't know why. With a separate /boot ext2 file system installation works fine. Best regards Ulrich Kleynmans Am 14.01.2015 um 17:22 schrieb Martin
Michlmayr:
* Ulrich Kleynmans <upk58@mnet-mail.de> [2015-01-09 19:29]:Installation is done with uImage und uInitrd from ftp.debian.org/debian/dists/stable/main/installer-armel/current/images/kirkwood/netboot/marvell/sheevaplug/. Installation can be started and works as expected until 'Making the system bootable' at 33%. Last successfull operation was 'Installed u-boot-tools '. After this the install hangs without error message. I waited for serveral hours.When this happens, please make another SSH connection to the installer and open a shell (when you connect with SSH, it will ask if you want to run the installer or a shell). Then take a look at /var/log/syslog to see what's going on, or possibly use "ps aux" to see what commands are running/stuck.But new uImage and uInitrd are not generated, I searched the whole device for it.This is related to the problem above. The uImage/uInitrd files are generated after the step that hung in your installation. |