Banana Pi M1 netinstall does not find wired ethernet
Hi,
I followed the instructions at [1] using the debian stretch files at
[2], specifically [3] and [4].
The SD Card image creation becomes:
zcat firmware.BananaPi.img.gz partition.img.gz > /dev/mmcblk0
I change the uboot environment as required, and the hdmi output gets
used correctly.
The installer hangs when detecting hardware and therefore cannot
continue to get network connectivity.
I know the hardware works because I can put both the armbian and
bananian distributions on it
I also built an image using instructions from the lemaker wiki, but
those pages seem to have disappeared.
In each of these cases, the wired ethernet connection works
I have included outputs from lsmod and dmesg.
If further details are needed, I will try to provide them.
[1]
https://wiki.debian.org/InstallingDebianOn/Allwinner#Installing_from_an_SD_card_image
[2]
http://ftp.uk.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/
[3]
http://ftp.uk.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/firmware.BananaPi.img.gz
[4]
http://ftp.uk.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gz
root@bananapi:~# lsmod
Module Size Used by
bnep 9700 2
bluetooth 295282 5 bnep
brcmfmac 159174 0
brcmutil 4893 1 brcmfmac
rt2800usb 16715 0
rt2800lib 68801 1 rt2800usb
realtek 2263 0
rt2x00usb 7817 1 rt2800usb
rt2x00lib 32752 3 rt2x00usb,rt2800lib,rt2800usb
input_leds 2420 0
mac80211 353201 3 rt2x00lib,rt2x00usb,rt2800lib
dwmac_sunxi 2111 0
evdev 9492 0
sun4i_ts 3926 0
root@bananapi:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.3-sunxi (root@production) (gcc version
4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #2 SMP Sun Oct 11 14:12:18 CEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: Banana Pi BPI-M1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 260864
[ 0.000000] free_area_init_node: node 0, pgdat c0a2c800, node_mem_map
eef01000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 66304 pages, LIFO batch:15
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 11 pages/cpu @eeed0000 s15424 r8192
d21440 u45056
[ 0.000000] pcpu-alloc: s15424 r8192 d21440 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259154
[ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1
rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0
sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0
disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0
enforcing=0 loglevel=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1022528K/1043456K available (7735K kernel code,
341K rwdata, 1988K rodata, 324K init, 298K bss, 20928K reserved, 0K
cma-reserved, 265216K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0986fa8 (9724 kB)
.init : 0xc0987000 - 0xc09d8000 ( 324 kB)
.data : 0xc09d8000 - 0xc0a2d560 ( 342 kB)
.bss : 0xc0a30000 - 0xc0a7aa94 ( 299 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps
every 4398046511097ns
[ 0.000018] Switching to timer-based delay loop, resolution 41ns
[ 0.000373] clocksource: timer: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000545] clocksource: hstimer: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 12741736309 ns
[ 0.000730] Console: colour dummy device 80x30
[ 0.000872] console [tty1] enabled
[ 0.000897] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000911] pid_max: default: 32768 minimum: 301
[ 0.001049] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.001801] Initializing cgroup subsys blkio
[ 0.001831] Initializing cgroup subsys memory
[ 0.001872] Initializing cgroup subsys devices
[ 0.001888] Initializing cgroup subsys freezer
[ 0.001901] Initializing cgroup subsys net_cls
[ 0.001914] Initializing cgroup subsys perf_event
[ 0.001959] CPU: Testing write buffer coherency: ok
[ 0.002311] /cpus/cpu@0 missing clock-frequency property
[ 0.002329] /cpus/cpu@1 missing clock-frequency property
[ 0.002342] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002404] Setting up static identity map for 0x400082c0 - 0x40008318
[ 0.004427] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004530] Brought up 2 CPUs
[ 0.004552] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.004558] CPU: All CPU(s) started in HYP mode.
[ 0.004563] CPU: Virtualization extensions available.
[ 0.005310] devtmpfs: initialized
[ 0.013426] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 4
[ 0.013826] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014132] xor: measuring software checksum speed
[ 0.109973] arm4regs : 1261.600 MB/sec
[ 0.210035] 8regs : 778.800 MB/sec
[ 0.310090] 32regs : 799.200 MB/sec
[ 0.310098] xor: using function: arm4regs (1261.600 MB/sec)
[ 0.310235] pinctrl core: initialized pinctrl subsystem
[ 0.311380] NET: Registered protocol family 16
[ 0.312022] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.340163] cpuidle: using governor ladder
[ 0.364622] cpuidle: using governor menu
[ 0.371266] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.371285] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.550441] raid6: int32x1 gen() 138 MB/s
[ 0.720727] raid6: int32x1 xor() 111 MB/s
[ 0.890928] raid6: int32x2 gen() 185 MB/s
[ 1.061076] raid6: int32x2 xor() 120 MB/s
[ 1.231179] raid6: int32x4 gen() 197 MB/s
[ 1.401263] raid6: int32x4 xor() 122 MB/s
[ 1.571443] raid6: int32x8 gen() 179 MB/s
[ 1.741562] raid6: int32x8 xor() 116 MB/s
[ 1.741570] raid6: using algorithm int32x4 gen() 197 MB/s
[ 1.741576] raid6: .... xor() 122 MB/s, rmw enabled
[ 1.741583] raid6: using intx1 recovery algorithm
[ 1.741905] reg-fixed-voltage usb1-vbus: could not find pctldev for
node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 1.741954] reg-fixed-voltage usb2-vbus: could not find pctldev for
node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 1.742754] reg-fixed-voltage gmac-3v3: could not find pctldev for
node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[ 1.743297] SCSI subsystem initialized
[ 1.743617] libata version 3.00 loaded.
[ 1.743965] usbcore: registered new interface driver usbfs
[ 1.744034] usbcore: registered new interface driver hub
[ 1.744120] usbcore: registered new device driver usb
[ 1.744249] media: Linux media interface: v0.10
[ 1.744308] Linux video capture interface: v2.00
[ 1.744410] pps_core: LinuxPPS API ver. 1 registered
[ 1.744419] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 1.744448] PTP clock support registered
[ 1.746729] clocksource: Switched to clocksource arch_sys_counter
[ 1.747755] simple-framebuffer 7fb00000.framebuffer: framebuffer at
0x7fb00000, 0x500000 bytes, mapped to 0xf0800000
[ 1.747773] simple-framebuffer 7fb00000.framebuffer: format=x8r8g8b8,
mode=1280x1024x32, linelength=5120
[ 1.771295] Console: switching to colour frame buffer device 160x64
[ 1.793965] simple-framebuffer 7fb00000.framebuffer: fb0: simplefb
registered!
[ 1.804462] NET: Registered protocol family 2
[ 1.805175] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 1.805271] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.805399] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.805496] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.805562] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.805860] NET: Registered protocol family 1
[ 1.806318] RPC: Registered named UNIX socket transport module.
[ 1.806336] RPC: Registered udp transport module.
[ 1.806342] RPC: Registered tcp transport module.
[ 1.806347] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.807374] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
[ 1.807436] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5
counters available
[ 1.808652] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.820058] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.821804] NFS: Registering the id_resolver key type
[ 1.821880] Key type id_resolver registered
[ 1.821887] Key type id_legacy registered
[ 1.822587] Key type cifs.idmap registered
[ 1.822907] fuse init (API version 7.23)
[ 1.823825] JFS: nTxBlock = 7988, nTxLock = 63908
[ 1.834988] SGI XFS with ACLs, security attributes, realtime, no
debug enabled
[ 1.842137] bounce: pool size: 64 pages
[ 1.842262] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 1.842453] io scheduler noop registered
[ 1.842471] io scheduler deadline registered
[ 1.842528] io scheduler cfq registered (default)
[ 1.845723] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO
driver
[ 1.907226] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.930626] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41,
base_baud = 1500000) is a U6_16550A
[ 1.954001] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42,
base_baud = 1500000) is a U6_16550A
[ 1.975352] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43,
base_baud = 1500000) is a U6_16550A
[ 1.982420] loop: module loaded
[ 1.983095] Loading iSCSI transport class v2.0-870.
[ 2.046801] ahci-sunxi 1c18000.sata: controller can't do PMP, turning
off CAP_PMP
[ 2.046859] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan
disabled
[ 2.046893] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports
3 Gbps 0x1 impl platform mode
[ 2.046909] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo
only pio slum part ccc
[ 2.047977] scsi host0: ahci-sunxi
[ 2.048338] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff]
port 0x100 irq 30
[ 2.049689] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 2.052481] tun: Universal TUN/TAP device driver, 1.6
[ 2.052496] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.053141] PPP generic driver version 2.4.2
[ 2.053387] PPP BSD Compression module registered
[ 2.053404] PPP Deflate Compression module registered
[ 2.053432] PPP MPPE Compression module registered
[ 2.053449] NET: Registered protocol family 24
[ 2.053489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.053502] ehci-platform: EHCI generic platform driver
[ 2.053909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.053941] ohci-platform: OHCI generic platform driver
[ 2.054308] usbcore: registered new interface driver usb-storage
[ 2.054323] ftdi_elan: driver ftdi-elan
[ 2.054786] usbcore: registered new interface driver ftdi-elan
[ 2.055838] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.055856] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.055966] i2c /dev entries driver
[ 2.057083] axp20x 0-0034: AXP20x variant AXP209 found
[ 2.064313] input: axp20x-pek as
/devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[ 2.064524] axp20x-regulator axp20x-regulator: regulators node not found
[ 2.066990] axp20x 0-0034: AXP20X driver loaded
[ 2.068749] IR NEC protocol handler initialized
[ 2.068770] IR RC5(x/sz) protocol handler initialized
[ 2.068783] IR RC6 protocol handler initialized
[ 2.068794] IR JVC protocol handler initialized
[ 2.068807] IR Sony protocol handler initialized
[ 2.068819] IR SANYO protocol handler initialized
[ 2.068831] IR Sharp protocol handler initialized
[ 2.068844] IR MCE Keyboard/mouse protocol handler initialized
[ 2.068856] IR XMP protocol handler initialized
[ 2.069974] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16
sec, nowayout=0)
[ 2.070756] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.071249] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.106955] sunxi-mmc 1c0f000.mmc: base:0xf0564000 irq:27
[ 2.107812] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.108136] usbcore: registered new interface driver usbhid
[ 2.108145] usbhid: USB HID core driver
[ 2.109101] ipip: IPv4 over IPv4 tunneling driver
[ 2.109952] Initializing XFRM netlink socket
[ 2.110972] NET: Registered protocol family 10
[ 2.112257] NET: Registered protocol family 17
[ 2.112306] NET: Registered protocol family 15
[ 2.112376] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.112460] 8021q: 802.1Q VLAN Support v1.8
[ 2.112540] Key type dns_resolver registered
[ 2.123233] cpu cpu0: running cpufreq without cooling device: -38
[ 2.123314] Registering SWP/SWPB emulation handler
[ 2.124224] registered taskstats version 1
[ 2.128311] Btrfs loaded
[ 2.132057] Key type encrypted registered
[ 2.134522] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.134576] ehci-platform 1c14000.usb: new USB bus registered,
assigned bus number 1
[ 2.134734] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
[ 2.146780] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.147125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.147139] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.147149] usb usb1: Product: EHCI Host Controller
[ 2.147157] usb usb1: Manufacturer: Linux 4.2.3-sunxi ehci_hcd
[ 2.147166] usb usb1: SerialNumber: 1c14000.usb
[ 2.147933] hub 1-0:1.0: USB hub found
[ 2.148000] hub 1-0:1.0: 1 port detected
[ 2.148763] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.148802] ehci-platform 1c1c000.usb: new USB bus registered,
assigned bus number 2
[ 2.148971] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
[ 2.153856] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 2.156326] mmc0: new high speed SDHC card at address 59b4
[ 2.156978] mmcblk0: mmc0:59b4 NCard 30.1 GiB
[ 2.158374] mmcblk0: p1
[ 2.166844] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.167181] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.167196] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.167206] usb usb2: Product: EHCI Host Controller
[ 2.167215] usb usb2: Manufacturer: Linux 4.2.3-sunxi ehci_hcd
[ 2.167224] usb usb2: SerialNumber: 1c1c000.usb
[ 2.167998] hub 2-0:1.0: USB hub found
[ 2.168066] hub 2-0:1.0: 1 port detected
[ 2.168856] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.168897] ohci-platform 1c14400.usb: new USB bus registered,
assigned bus number 3
[ 2.169079] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
[ 2.231020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.231036] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.231045] usb usb3: Product: Generic Platform OHCI controller
[ 2.231054] usb usb3: Manufacturer: Linux 4.2.3-sunxi ohci_hcd
[ 2.231063] usb usb3: SerialNumber: 1c14400.usb
[ 2.231804] hub 3-0:1.0: USB hub found
[ 2.231873] hub 3-0:1.0: 1 port detected
[ 2.232638] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.232676] ohci-platform 1c1c400.usb: new USB bus registered,
assigned bus number 4
[ 2.232859] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
[ 2.290996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.291012] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.291022] usb usb4: Product: Generic Platform OHCI controller
[ 2.291032] usb usb4: Manufacturer: Linux 4.2.3-sunxi ohci_hcd
[ 2.291040] usb usb4: SerialNumber: 1c1c400.usb
[ 2.291789] hub 4-0:1.0: USB hub found
[ 2.291852] hub 4-0:1.0: 1 port detected
[ 2.292369] sunxi-rtc 1c20d00.rtc: setting system clock to 2015-12-07
11:25:28 UTC (1449487528)
[ 2.297055] gmac-3v3: disabling
[ 2.297096] vcc5v0: disabling
[ 2.297108] vcc3v0: disabling
[ 2.396850] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.410675] EXT4-fs (mmcblk0p1): mounted filesystem with writeback
data mode. Opts: (null)
[ 2.410819] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[ 2.419019] devtmpfs: mounted
[ 2.420085] Freeing unused kernel memory: 324K (c0987000 - c09d8000)
[ 2.466957] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 2.636894] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
[ 2.636945] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.636974] usb 1-1: Product: 802.11 n WLAN
[ 2.636999] usb 1-1: Manufacturer: Ralink
[ 2.637024] usb 1-1: SerialNumber: 1.0
[ 2.826839] usb 4-1: new full-speed USB device number 2 using
ohci-platform
[ 3.057146] usb 4-1: New USB device found, idVendor=045e, idProduct=0745
[ 3.057186] usb 4-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.057204] usb 4-1: Product: Microsoft® 2.4GHz Transceiver v7.0
[ 3.057229] usb 4-1: Manufacturer: Microsoft
[ 3.067178] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as
/devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.0/0003:045E:0745.0001/input/input1
[ 3.127173] hid-generic 0003:045E:0745.0001: input: USB HID v1.11
Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on
usb-1c1c400.usb-1/input0
[ 3.143251] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as
/devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.1/0003:045E:0745.0002/input/input2
[ 3.196991] hid-generic 0003:045E:0745.0002: input: USB HID v1.11
Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on
usb-1c1c400.usb-1/input1
[ 3.230925] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as
/devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.2/0003:045E:0745.0003/input/input3
[ 3.286954] hid-generic 0003:045E:0745.0003: input: USB HID v1.11
Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on
usb-1c1c400.usb-1/input2
[ 3.451541] systemd-udevd[204]: starting version 215
[ 3.475063] random: udevd urandom read with 8 bits of entropy available
[ 4.036966] sun7i-dwmac 1c50000.ethernet: no reset control found
[ 4.036993] Ring mode enabled
[ 4.037002] No HW DMA feature register supported
[ 4.037008] Normal descriptors
[ 4.037014] TX Checksum insertion supported
[ 4.126877] libphy: stmmac: probed
[ 4.126911] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 4.126921] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 4.228180] usb 1-1: reset high-speed USB device number 2 using
ehci-platform
[ 4.388262] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390,
rev 0502 detected
[ 4.426146] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370
detected
[ 4.427342] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.429477] usbcore: registered new interface driver rt2800usb
[ 5.036261] cfg80211: World regulatory domain updated:
[ 5.036312] cfg80211: DFS Master region: unset
[ 5.036330] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.036362] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 5.036388] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 5.036414] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 5.036445] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 5.036475] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 5.036502] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 5.036527] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 5.036553] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 12.099843] EXT4-fs (mmcblk0p1): re-mounted. Opts:
data=writeback,commit=600,errors=remount-ro
[ 14.831486] RX IPC Checksum Offload disabled
[ 14.831516] No MAC Management Counters available
[ 20.817209] sun7i-dwmac 1c50000.ethernet eth0: Link is Up -
1Gbps/Full - flow control rx/tx
[ 27.947498] EXT4-fs (mmcblk0p1): resizing filesystem from 257759 to
7908864 blocks
[ 28.167218] random: nonblocking pool is initialized
[ 28.201316] EXT4-fs (mmcblk0p1): resized filesystem to 7908864
[ 45.027361] Adding 131068k swap on /var/swap. Priority:-1 extents:5
across:598012k SS
[ 45.091574] Bluetooth: Core ver 2.20
[ 45.091696] NET: Registered protocol family 31
[ 45.091710] Bluetooth: HCI device and connection manager initialized
[ 45.091737] Bluetooth: HCI socket layer initialized
[ 45.091751] Bluetooth: L2CAP socket layer initialized
[ 45.091791] Bluetooth: SCO socket layer initialized
[ 45.129198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 45.129222] Bluetooth: BNEP filters: protocol multicast
[ 45.129250] Bluetooth: BNEP socket layer initialized
[ 63.508625] usb 4-1: USB disconnect, device number 2
Reply to: