Re: qcontrol for QNAP TS-221 in Jessie
* Adam Ward <caysho@internode.on.net> [2015-06-15 11:24]:
> Is this supported ?
> If not, what needs to be done to get support into qcontrol ?
The TS-221 should work without any problems. Did you experience a
problem with it?
Ian, maybe we need something like the following:
diff --git a/README b/README
index 0de0456..3c8dae2 100644
--- a/README
+++ b/README
@@ -3,7 +3,7 @@ see https://gitorious.org/qcontrol/
Supported devices:
- QNAP TS-109, TS-109 II, TS-209 and TS-209 II (ts209)
- QNAP TS-409 and TS-409U (ts409)
- - QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P (ts219)
- - QNAP TS-410, TS-410U, TS-419P and TS-419U (ts41x)
+ - QNAP TS-11x, TS-12x, HS-210, TS-21x and TS-22x (ts219)
+ - QNAP TS-41x and TS-42x (ts41x)
- Synology Diskstation and Rackstation (synology)
diff --git a/debian/control b/debian/control
index 5d08cef..f6530eb 100644
--- a/debian/control
+++ b/debian/control
@@ -19,10 +19,10 @@ Description: hardware control for QNAP Turbo Station devices
presses or temperature, with events triggering actions defined in the
configuration file.
.
- Supported devices at this time are the QNAP TS-109, TS-110, TS-119,
- TS-209, TS-210, TS-219, TS-219P, TS-409, TS-409U, TS-410, TS-410U,
- TS-419P and TS-419U but the code is extensible so more devices may
- be added in future releases.
+ Currently supported devices are the QNAP TS-109, QNAP TS-11x,
+ QNAP TS-12x, QNAP TS-209, QNAP HS-210, QNAP TS-21x, QNAP TS-22x,
+ QNAP TS-409, QNAP TS-409U, QNAP TS-41x, QNAP TS-42x and Synology
+ Diskstation and Rackstation.
Package: qcontrol-udeb
Section: debian-installer
diff --git a/debian/qcontrol.1 b/debian/qcontrol.1
index 1ef6de0..942523b 100644
--- a/debian/qcontrol.1
+++ b/debian/qcontrol.1
@@ -18,10 +18,10 @@ Note: the current version does not have a real daemon mode. Caution is
therefore advised when using qcontrol as a real daemon to monitor and
control a device.
.PP
-Currently supported devices are the QNAP TS-109, QNAP TS-110, QNAP TS-119,
-QNAP TS-209, QNAP TS-210, QNAP TS-219, QNAP TS-219P, QNAP TS-409, QNAP
-TS-409U, QNAP TS-410, QNAP TS-410U, QNAP TS-419P and QNAP TS-419U but
-support for additional devices may be added in future releases.
+Currently supported devices are the QNAP TS-109, QNAP TS-11x, QNAP TS-12x,
+QNAP TS-209, QNAP HS-210, QNAP TS-21x, QNAP TS-22x, QNAP TS-409, QNAP
+TS-409U, QNAP TS-41x, QNAP TS-42x and Synology Diskstation and Rackstation.
+Support for additional devices may be added in future releases.
.SH BASIC USAGE
Normally a control process will be started when the system is booted.
--
Martin Michlmayr
http://www.cyrius.com/
Reply to: