Re: Information needed from owners/users of Debian on ARM/kirkwood base QNAP devices (should take < 1min to gather)
2014-06-17 10:49 GMT+03:00 Ian Campbell <ijc@hellion.org.uk>:
> TL;DR: Please run the attached kirkwood-qnap script on your ARM based
> QNAP systems as "./kirkwood-qnap --info" and report the results in this
> thread along with the model/kind of your QNAP device (as precisely as
> you can).
QNAP TS-221 (2.0GHz, 1GB RAM -
http://www.qnap.com/en/index.php?lang=en&sn=822&c=351&sc=514&t=523&n=18375&g=1):
$ ./kirkwood-qnap --info
Kernel: Linux verkko 3.2.0-4-kirkwood #1 Debian 3.2.54-2
armv5tel GNU/Linux
cpuinfo: Hardware : QNAP TS-119/TS-219
dt model: n/a
PCI devices:
00:00.0 0600: 11ab:6282 (rev 01)
00:01.0 0106: 197b:2363 (rev 03)
00:01.1 0101: 197b:2363 (rev 03)
01:00.0 0600: 11ab:6282 (rev 01)
01:01.0 0c03: 1b6f:7023 (rev 01)
PHY devices (/sys/bus/mdio_bus/devices/):
0:00
Soc Bus: n/a
QNAP TS-119/TS-219
kirkwood-qnap: machine: QNAP TS-119/TS-219
kirkwood-qnap: success: PCI => kirkwood-ts219-6282.dtb
kirkwood-qnap: success: PHY => kirkwood-ts219-6282.dtb
-Timo
Reply to: