Problems getting a "new" board working correctly
Hello,
I've got in hands a NAS some days ago and i'm currently trying to get Debian
working on it.
About the NAS (got from the u-boot serial) :
- ** MARVELL BOARD: DB-88F6281A-BP LE
(http://www.arm.linux.org.uk/developer/machines/list.php?id=1680)
- U-Boot 1.1.4 (Dec 4 2009 - 14:12:59) Marvell version: 3.4.9
- Soc: 88F6281 A0 (DDR2)
- CPU : Marvell Feroceon (Rev 1)
I've used the kernel and initramfs from debian installer for qnap and it worked.
I actually have debian testing installed on an usb key, and i boot it using the
following u-boot parameters :
bootcmd=tftp 0x2000000 kernel ; tftp 0x3000000 initrd.gz ; bootm 0x2000000 0x3000000
bootargs=mtdparts=spi_flash:0x000e0000@0x00000000(u-boot)ro,0x1d73c0@0x000e0000(uImage),0x86cb58@0x2b73c0(uInitrd),-@0xb23f18(rootfs) console=ttyS0,115200 verbose mem=256M root=/dev/ram ip=off
arcNumber=2846
mainlineLinux=yes
I actually use the arcNumber of 2846, which is 0x0b1e and correspond to "HP
t5325 Thin Client", actually this is my best result, with this specific one i
can get at leat one hdd starting and being usable (there is 4 hdds).
It seems that the DB-88F6281A-BP is under the orion5x tree, but the orion5x
kernel doesn't seems to boot, i only got :
Uncompressing Linux... done, booting the kernel.
And nothing better, so i'm using the kirkwood kernel atm.
There seems to be a G751 chip, supported by LM75.
But even if i built it and insmod, i can't get anything in dmesg.
The fan seems to be controlled by GPIO but there is no /dev/gpio nor anything
related in the dmesg.
Also for the HDDS using the hp thin client machine ID i can get one hdd spinnig
and detected, but not the 3 others.
I have not tested the esata port, i don't have stuff for that.
Dual ethernet seems to partly works, i can use one port, the other doesn't seems to be
detected (only eth0, labeled as "EXT" on the NAS, the other is "LAN").
I'v attached lspci, dmesg and some u-boot stuff to help.
If someone have ideas on how to go forward i can try things, or even build (slow
but possible), i also have the serial wired in the NAS.
Thanks,
Dashie.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-1-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 Debian 3.12.9-1 (2014-02-01)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: HP t5325 Thin Client
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: mtdparts=spi_flash:0x000e0000@0x00000000(u-boot)ro,0x1d73c0@0x000e0000(uImage),0x86cb58@0x2b73c0(uInitrd),-@0xb23f18(rootfs) console=ttyS0,115200 verbose mem=256M root=/dev/ram ip=off
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 245344K/262144K available (3648K kernel code, 311K rwdata, 1280K rodata, 185K init, 412K bss, 16800K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04d8434 (4930 kB)
[ 0.000000] .init : 0xc04d9000 - 0xc05077f4 ( 186 kB)
[ 0.000000] .data : 0xc0508000 - 0xc0555ea0 ( 312 kB)
[ 0.000000] .bss : 0xc0555ea0 - 0xc05bd250 ( 413 kB)
[ 0.000000] NR_IRQS:114
[ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[ 0.000000] Console: colour dummy device 80x30
[ 9.978383] Calibrating delay loop... 1191.93 BogoMIPS (lpj=2383872)
[ 9.998171] pid_max: default: 32768 minimum: 301
[ 9.998269] Security Framework initialized
[ 9.998291] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 9.998360] Mount-cache hash table entries: 512
[ 9.998926] Initializing cgroup subsys memory
[ 9.998980] Initializing cgroup subsys devices
[ 9.998995] Initializing cgroup subsys freezer
[ 9.999005] Initializing cgroup subsys net_cls
[ 9.999013] Initializing cgroup subsys blkio
[ 9.999021] Initializing cgroup subsys perf_event
[ 9.999098] CPU: Testing write buffer coherency: ok
[ 9.999439] Setting up static identity map for 0xc0372eb0 - 0xc0372eec
[ 10.000812] devtmpfs: initialized
[ 10.002912] pinctrl core: initialized pinctrl subsystem
[ 10.003253] regulator-dummy: no parameters
[ 10.003556] NET: Registered protocol family 16
[ 10.003933] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 10.004623] cpuidle: using governor ladder
[ 10.004638] cpuidle: using governor menu
[ 10.004709] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 10.004728] Feroceon L2: Enabling L2
[ 10.004765] Feroceon L2: Cache support initialised.
[ 10.006131] Kirkwood PCIe port 0: link up
[ 10.006141] PCI: bus0 uses PCIe port 0
[ 10.006339] PCI host bridge to bus 0000:00
[ 10.006358] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 10.006369] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 10.006380] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 10.007014] PCI: bus0: Fast back to back transfers disabled
[ 10.007061] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe001ffff]
[ 10.007079] pci 0000:00:01.0: BAR 3: assigned [mem 0xe0020000-0xe0023fff]
[ 10.007095] pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x101f]
[ 10.008892] bio: create slab <bio-0> at 0
[ 10.009355] vgaarb: loaded
[ 10.009992] Switched to clocksource orion_clocksource
[ 10.025028] NET: Registered protocol family 2
[ 10.025669] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 10.025725] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 10.025755] TCP: Hash tables configured (established 2048 bind 2048)
[ 10.025812] TCP: reno registered
[ 10.025824] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 10.025849] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 10.026069] NET: Registered protocol family 1
[ 10.026300] Unpacking initramfs...
[ 10.772658] Freeing initrd memory: 8620K (c3001000 - c386c000)
[ 10.772733] NetWinder Floating Point Emulator V0.97 (double precision)
[ 10.773565] audit: initializing netlink socket (disabled)
[ 10.773613] type=2000 audit(0.788:1): initialized
[ 10.886855] VFS: Disk quotas dquot_6.5.2
[ 10.886904] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.887026] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 10.887220] msgmni has been set to 496
[ 10.889017] alg: No test for stdrng (krng)
[ 10.889100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 10.889219] io scheduler noop registered
[ 10.889229] io scheduler deadline registered
[ 10.889251] io scheduler cfq registered (default)
[ 10.889523] mv_xor mv_xor.0: Marvell shared XOR driver
[ 10.906038] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 10.926036] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 10.926168] mv_xor mv_xor.1: Marvell shared XOR driver
[ 10.946035] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 10.966034] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 10.966336] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 10.986951] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 11.510612] console [ttyS0] enabled
[ 11.515374] m25p80 spi0.0: found mr25h256, expected mx25l8005
[ 11.521180] m25p80 spi0.0: mr25h256 (32 Kbytes)
[ 11.525754] mtd: spi_flash: partitioning exceeds flash size, truncating
[ 11.532412] mtd: spi_flash: partitioning exceeds flash size, truncating
[ 11.539063] mtd: spi_flash: partitioning exceeds flash size, truncating
[ 11.545719] 4 cmdlinepart partitions found on MTD device spi_flash
[ 11.551934] Creating 4 MTD partitions on "spi_flash":
[ 11.557022] 0x000000000000-0x000000008000 : "u-boot"
[ 11.562888] 0x0000000e0000-0x000000008000 : "uImage"
[ 11.567893] mtd: partition "uImage" is out of reach -- disabled
[ 11.574689] 0x0000002b73c0-0x000000008000 : "uInitrd"
[ 11.579776] mtd: partition "uInitrd" is out of reach -- disabled
[ 11.586649] 0x000000b23f18-0x000000008000 : "rootfs"
[ 11.591651] mtd: partition "rootfs" is out of reach -- disabled
[ 11.598783] mousedev: PS/2 mouse device common for all mice
[ 12.606100] rtc-mv rtc-mv: internal RTC not ticking
[ 12.611104] i2c /dev entries driver
[ 12.615510] TCP: cubic registered
[ 12.618911] NET: Registered protocol family 10
[ 12.624029] mip6: Mobile IPv6
[ 12.627037] NET: Registered protocol family 17
[ 12.631517] mpls_gso: MPLS GSO support
[ 12.635774] registered taskstats version 1
[ 12.640742] /build/linux-qWXwPY/linux-3.12.9/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 12.650746] Freeing unused kernel memory: 184K (c04d9000 - c0507000)
Loading, please wait...
[ 12.722580] systemd-udevd[48]: starting version 204
[ 12.848262] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 12.912004] usbcore: registered new interface driver usbfs
[ 12.967261] libphy: orion_mdio_bus: probed
[ 12.977200] usbcore: registered new interface driver hub
[ 12.991582] SCSI subsystem initialized
[ 13.505813] usbcore: registered new device driver usb
[ 13.531701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.566219] ehci-orion: EHCI orion driver
[ 14.133562] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d
[ 14.142482] sata_mv sata_mv.0: cannot get optional clkdev
[ 14.152551] sata_mv sata_mv.0: slots 32 ports 2
[ 14.160644] scsi0 : sata_mv
[ 14.164080] scsi1 : sata_mv
[ 14.167420] ata1: SATA max UDMA/133 irq 21
[ 14.171556] ata2: SATA max UDMA/133 irq 21
[ 14.175907] orion-ehci orion-ehci.0: EHCI Host Controller
[ 14.182297] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 14.190053] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 14.206018] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 14.212102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.218940] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.226206] usb usb1: Product: EHCI Host Controller
[ 14.231114] usb usb1: Manufacturer: Linux 3.12-1-kirkwood ehci_hcd
[ 14.237332] usb usb1: SerialNumber: orion-ehci.0
[ 14.242926] hub 1-0:1.0: USB hub found
[ 14.246746] hub 1-0:1.0: 1 port detected
[ 14.562037] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 14.650028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 14.657001] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[ 14.674109] ata1.00: hard resetting link
[ 14.698445] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[ 14.705195] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.716346] hub 1-1:1.0: USB hub found
[ 14.725709] hub 1-1:1.0: 2 ports detected
[ 14.998765] ata1.01: hard resetting link
[ 15.018191] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 15.131436] usb 1-1.2: New USB device found, idVendor=0781, idProduct=557c
[ 15.138364] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.145731] usb 1-1.2: Product: Cruzer Orbit
[ 15.150028] usb 1-1.2: Manufacturer: SanDisk
[ 15.154326] usb 1-1.2: SerialNumber: 4C530009121106109304
[ 15.174125] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 15.180660] scsi2 : usb-storage 1-1.2:1.0
[ 15.186213] usbcore: registered new interface driver usb-storage
[ 15.322763] ata1.02: hard resetting link
[ 15.646725] ata1.03: hard resetting link
[ 16.183407] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Orbit 1.27 PQ: 0 ANSI: 6
[ 16.217487] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 16.226211] sd 2:0:0:0: [sda] Write Protect is off
[ 16.231708] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 16.247837] sda: sda1 sda2 sda3 < sda5 >
[ 16.256212] sd 2:0:0:0: [sda] Attached SCSI disk
[ 20.422056] ata1.03: ATA-8: ST3500418AS, CC44, max UDMA/133
[ 20.427675] ata1.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 20.498053] ata1.03: configured for UDMA/133
[ 20.502536] ata1: EH complete
[ 20.505857] scsi 0:3:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
[ 20.515158] sd 0:3:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 20.523724] sd 0:3:0:0: [sdb] Write Protect is off
[ 20.528670] sd 0:3:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.581199] sdb: sdb1 sdb2
[ 20.585822] sd 0:3:0:0: [sdb] Attached SCSI disk
[ 20.846023] ata2: SATA link down (SStatus 0 SControl F300)
[ 20.895282] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 20.902441] sd 0:3:0:0: Attached scsi generic sg1 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 21.438161] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 22.658050] systemd-udevd[268]: starting version 204
. ok
[....] Synthesizing the initial hotplug events...[ 22.978719] input: gpio-keys as /devices/platform/gpio-keys/input/input0
done.
[ 23.456432] alg: hash: Test 1 failed for mv-hmac-sha1
[ 23.461551] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24
[ 23.468034] 00000010: b7 c3 16 0c
[ 23.566610] orion_wdt: Initial timeout 21 sec
[ 23.605705] t5325-audio t5325-audio: ASoC: CODEC alc562x-codec.0-001a not registered
[ 23.614655] alc562x-codec 0-001a: failed to read I2C
[....] Waiting for /dev to be fully populated...[ 23.640413] alc562x-codec: probe of 0-001a failed with error -5
[ 23.655954] t5325-audio t5325-audio: snd_soc_register_card() failed: -517
[ 23.687998] platform t5325-audio: Driver t5325-audio requests probe deferral
done.
[....] Activating swap...[ 24.373341] Adding 383996k swap on /dev/sda5. Priority:-1 extents:1 across:383996k
/dev/sda2: clean, 124502/449680 files, 637028/1795328 blocks
done.
[ 24.796891] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ ok ] Cleaning up temporary files... /tmp.
[info] Loading kernel module gpio_keys.
[info] Loading kernel module loop.
[ 25.874350] loop: module loaded
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
/dev/sda1: clean, 17/124496 files, 27791/248832 blocks
done.
[....] Mounting local filesystems...[ 26.567995] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 26.581742] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ ok ] Configuring network interfaces...done.
[ ok ] Starting rpcbind daemon....
[....] Starting NFS common utilities: statd[ 28.553288] RPC: Registered named UNIX socket transport module.
[ 28.559275] RPC: Registered udp transport module.
[ 28.564016] RPC: Registered tcp transport module.
[ 28.568749] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.605575] FS-Cache: Loaded
[ 28.661872] FS-Cache: Netfs 'nfs' registered for caching
[ 28.794999] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd[ 28.954523] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 28.966157] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
. ok
[ ok ] Cleaning up temporary files....
[....] Setting sensors limitsNo sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
. ok
[ ok ] Starting qcontrol daemon: qcontrol.
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[warn] Not starting fancontrol; run pwmconfig first. ... (warning).
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ 30.611573] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 30.621472] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ ok ] Starting NetBIOS name server: nmbd.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting deferred execution scheduler: atd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting system message bus: dbus.
[ ok ] Starting MTA: exim4.
[ ok ] Starting sensor daemon: sensord.
[ ok ] Starting SMB/CIFS daemon: smbd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Starting the Winbind daemon: winbind.
[info] System boot completed.
Error connecting to socket: No such file or directory
Debian GNU/Linux jessie/sid debian ttyS0
debian login:
root@debian:~# lspci -vvv
00:00.0 Host bridge: Marvell Technology Group Ltd. 88F6281 [Kirkwood] ARM SoC (rev 02)
Subsystem: Marvell Technology Group Ltd. Device 11ab
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at <ignored> (64-bit, prefetchable)
Capabilities: [40] Power Management version 3
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:01.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Subsystem: Intel Corporation Device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 1000 [size=32]
Region 3: Memory at e0020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable- Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6281A-BP LE
U-Boot 1.1.4 (Dec 4 2009 - 14:12:59) Marvell version: 3.4.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0069191C
Soc: 88F6281 A0 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz
DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000 size 256MB
DRAM Total size 256MB 16bit width
Flash: 0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:128 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PEX interface detected Link X1
Net: egiga0 [PRIME]
Booting from image 0
Hit any key to stop autoboot: 0
Marvell>>
Marvell>>
Marvell>> print
baudrate=115200
loads_echo=0
CASset=min
MALLOC_len=1
ethprime=egiga0
ethaddr=00:50:43:3c:3b:5d
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
ethact=egiga0
mtdparts=mtdparts=orion_nand:0x000e0000@0x00000000(u-boot)ro,0x1d73c0@0x000e0000(uImage),0x86cb58@0x2b73c0(uInitrd),-@0xb23f18(rootfs)
bootcmd=tftp 0x2000000 kernel ; tftp 0x3000000 initrd.gz ; bootm 0x2000000 0x3000000
filesize=1d73c0
fileaddr=2000000
netmask=255.255.255.0
ipaddr=192.168.1.217
serverip=192.168.1.20
standalone=${bootargs}
console=console=ttyS0,115200
bootargs_root=root=/dev/nfs rw
bootargs_end=:::orion:eth0:none
image_name=uImage
autoload=no
orig=tftp 0x2000000 orig.kernel ; tftp 0x3000000 orig.initrd.gz ; bootm 0x2000000 0x3000000
arcNumber=2846
bootargs=mtdparts=spi_flash:0x000e0000@0x00000000(u-boot)ro,0x1d73c0@0x000e0000(uImage),0x86cb58@0x2b73c0(uInitrd),-@0xb23f18(rootfs) console=ttyS0,115200 verbose mem=256M root=/dev/ram ip=off
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
enaAutoRecovery=yes
Environment size: 1373/131068 bytes
Marvell>> boot
Using egiga0 device
TFTP from server 192.168.1.20; our IP address is 192.168.1.217
Filename 'kernel'.
Load address: 0x2000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################################
done
Bytes transferred = 1930176 (1d73c0 hex)
Using egiga0 device
TFTP from server 192.168.1.20; our IP address is 192.168.1.217
Filename 'initrd.gz'.
Load address: 0x3000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
done
Bytes transferred = 8833880 (86cb58 hex)
## Booting image at 02000000 ...
Image Name: Linux-3.12-1-kirkwood
Created: 2014-02-08 17:58:39 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1930112 Bytes = 1.8 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 03000000 ...
Image Name: initramfs--3.12-1-kirkwood
Created: 2014-02-08 17:55:26 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 8833816 Bytes = 8.4 MB
Load Address: 03000000
Entry Point: 03000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Reply to: