Re: Cubox-i with Debian Stock Kernel

[Ian Campbell <ijc@hellion.org.uk>]

On Fri, 2014-05-30 at 20:50 +0200, Rainer Dorsch wrote:
> CuBox-i U-Boot > ext4load mmc 0:2 0x10800000 vmlinuz
> 2853240 bytes read in 336 ms (8.1 MiB/s)
> CuBox-i U-Boot > ext4load mmc 0:2 0x18000000 imx6q-cubox-i.dtb
> 28603 bytes read in 154 ms (180.7 KiB/s)
> CuBox-i U-Boot > ext4load mmc 0:2 0x12800000 initrd.img
> 10909053 bytes read in 726 ms (14.3 MiB/s)
> CuBox-i U-Boot > bootz 0x10800000 0x12800000:${filesize} 0x18000000
> Kernel image @ 0x10800000 [ 0x000000 - 0x2b8978 ]
> ## Flattened Device Tree blob at 18000000
>    Booting using the fdt blob at 0x18000000
> EHCI failed to shut down host controller.
>    Loading Ramdisk to 8ecf7000, end 8f75e57d ... OK
>    Using Device Tree in place at 18000000, end 18009fba
> 
> Starting kernel ...
> 
> 
> and here the Cubox-i hangs, no progress anymore.

Your previous examples included setting bootargs, is that not needed
here too for some reason? Since it includes the console= I suspect it
should be, unless you saveenv'd it or something...

Ian.