Re: Bricked Sheevaplug
Hi Andrew,
Just a clue,
Le 09/02/2012 14:45, Andrew M.A. Cater a écrit :
> Upated to lastest DENX U-boot and went to install Debian as per Martin's excellent instructions.
>
> Aborted the install part way through.
>
> Now can't get back into the plug via U-boot : screen /dev/ttyUSB0 115200 isn't working.
>
> Have one green light - serial plug, reset are facing you as the plug lies with mains on right had side, Ethernet on left: this is the right hand one of the two green LEDs opposite the SD card.
>
> There is Ethernet activity.
>
> Reset button has no apparent effect.
>
> Nmap doesn't show it at least at 192.168.1.0/24
>
> Any ideas?
>
> This is the third or fourth attempt: I've another working Sheevaplug installed last week, but without serial console to this one I can't get any further.
Use you usb/serial as a JTag (it works also as a jtag).
You can reflash yoyr uboot usng openocd [1].
FYI, then only sheevaplugs bricked were because of power supply
faulty... ;-)
[1]https://doukki.net/doku.php?id=wiki:tutoriels:uboot.howto
---
Gk2
:-]
Reply to: