Re: Bricked Sheevaplug
Just a clue,
Le 09/02/2012 14:45, Andrew M.A. Cater a écrit :
> Upated to lastest DENX U-boot and went to install Debian as per Martin's excellent instructions.
> Aborted the install part way through.
> Now can't get back into the plug via U-boot : screen /dev/ttyUSB0 115200 isn't working.
> Have one green light - serial plug, reset are facing you as the plug lies with mains on right had side, Ethernet on left: this is the right hand one of the two green LEDs opposite the SD card.
> There is Ethernet activity.
> Reset button has no apparent effect.
> Nmap doesn't show it at least at 192.168.1.0/24
> Any ideas?
> This is the third or fourth attempt: I've another working Sheevaplug installed last week, but without serial console to this one I can't get any further.
Use you usb/serial as a JTag (it works also as a jtag).
You can reflash yoyr uboot usng openocd .
FYI, then only sheevaplugs bricked were because of power supply