Re: SheevaPlug fails to boot from SD
read attached message by Martin Michlmayr
Am Dienstag, 27. Oktober 2009 00:38:13 schrieb Jonas Häggqvist:
> I installed Debian on my plug, to an SD card following the instructions
> from http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html
>
> The install went fine, but I can't manage to get the last step working,
> namely setting the plug up to boot Debian from the SD. I partitioned in
> d-i, with a single partition for / plus a swap partition.
>
> Marvell>> setenv bootargs_console console=ttyS0,115200
> Marvell>> setenv bootcmd_mmc 'mmcinit; ext2load mmc 0 0x0800000
> /boot/uInitrd; ext2load mmc 0 0x400000 /boot/uImage'
> Marvell>> setenv bootcmd 'setenv bootargs $(bootargs_console); run
> bootcmd_mmc; bootm 0x400000 0x0800000'
> Marvell>> run bootcmd
> SD found. Card desciption is:
> Manufacturer: 0x03, OEM "SD"
> Product name: "SU01G", revision 8.0
> Serial number: 1091923440
> Manufacturing date: 7/2008
> CRC: 0x00, b0 = 0
>
> ** Invalid partition type "����" (expect "U-Boot")
>
> ** Invalid partition type "����" (expect "U-Boot")
> ## Booting image at 00400000 ...
> Bad Magic Number
> Marvell>>
>
> U-Boot 1.1.4 (Sep 14 2009 - 15:36:37) Marvell version: 3.4.19
>
--- Begin Message ---
* アズマ <masha_kazuhra3n@fujirabit.homeip.net> [2009-10-25 23:03]:
> I am in trouble in starting the i debian's nstaller according to the
> method of ur l
> "http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html";.
> Never the kernel booting had ended !
It will work after you execute the following commands:
setenv mainlineLinux yes
setenv arcNumber 2097
saveenv
reset
> next, print messeages included variables are showed as belows.
> mainlinelinux=yes
> arcNumber=2097
...
> mainlineLinux=no
The variables are case-sensitive, and you have to change mainlineLinux
to yes.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--- End Message ---
Reply to: