Re: kirkwood usb oops using 2.6.30-1
On Tue, 2009-08-18 at 09:09 -1000, Martin Michlmayr wrote:
> This sounds similar to the problem reported in
> http://kerneltrap.org/mailarchive/linux-usb/2009/5/5/5641294
>
> Can you try to connect the drive to a different USB port?
Yes, I have connected the same external HDD to the USB port on the front
of the TS-219P and then performed the actions as in the original post:
rsync was able to transfer 19GB w/o any noticeable errors. At least the
kernel didn't report any.
Referring the above link, it seems the USB topology is identical to the
TS-209II. I had owned this device; on that device the transfer worked
with no problems (though I can't remember which port was used).
Looking at the output of lsusb -v, I see the discrete 4-way USB hub
presumably controlling the two USB ports on the back side of the device.
When I'm a little braver, I will again attempt the large transfer using
rsync and a back side USB port.
Should I report the output of lsusb -v here?
--
John Holland
___________________________________________
Cellent Finance Solutions AG
Firmensitz: Calwer Straße 33, 70173 Stuttgart
Registergericht: Amtsgericht Stuttgart, HRB 720743
Vorstand: Thomas Wild
Vorsitzender des Aufsichtsrats: Rudolf Zipf
Reply to: