Re: thecus n2100 armel lenny upgrade, won't boot
On Monday 18 August 2008 09:57:16 you wrote:
> I guess, that you'll need a serial console.
> Without, you can only guess, where it stuck, like did it access the
> disks and so...
>
> If it gets that far, you probably could check the logs, as it might
> logged something of interest.
in attachment you can find the console log. It seems to fail to find a
rootfs...
Joost
--
homepage: http://damad.be/joost
photo/blog: http://damad.be/joost/blog
RST=No
Transfer to factory test Mode : No
Reset default set:Normal
Thecus: Found PCI device Vendor ID=0x000010EC
Vendor 0x10ec
Device 0x8169
Allocate cyg_pci_io_base=0x90000100
Allocate cyg_pci_memory_base=0x40000100
Thecus: Found PCI device Vendor ID=0x000010EC
Vendor 0x10ec
Device 0x8169
Allocate cyg_pci_io_base=0x90000200
Allocate cyg_pci_memory_base=0x40000200
Thecus: Found PCI device Vendor ID=0x00001095
Vendor 0x1095
Device 0x3512
Allocate cyg_pci_io_base=0x90000208
Allocate cyg_pci_io_base=0x9000020c
Allocate cyg_pci_io_base=0x90000218
Allocate cyg_pci_io_base=0x9000021c
Allocate cyg_pci_io_base=0x90000230
Allocate cyg_pci_memory_base=0x40000400
Thecus: Found PCI device Vendor ID=0x00001106
Thecus: Found PCI device Vendor ID=0x00001106
Thecus: Found PCI device Vendor ID=0x00001106
Vendor 0x1106
Device 0x3104
Allocate cyg_pci_memory_base=0x40000500
PCI: device already configured
rtl-eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xb0000000, 00:14:fd:30:2d:9a
rtl-eth0: Auto-negotiation Enabled.
PCI: device already configured
eth1 found: bus[0] dev[2] base[b0000100]
rtl-eth1: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xb0000100, 00:14:fd:30:2d:9b
Ethernet rtl-eth0: MAC address 00:14:fd:30:2d:9a
IP: 192.168.1.100/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.93 - built 17:25:00, Feb 6 2007
Platform: THECUS N2100 (IOP80219)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x20000000, 0x0004b890-0x1ffd1000 available, total: 512 MB
FLASH: 0xf0000000 - 0xf1000000, 128 blocks of 0x00020000 bytes each.
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 3.000 seconds - enter ^C to abort
== Executing boot script in 2.710 seconds - enter ^C to abort
== Executing boot script in 2.380 seconds - enter ^C to abort
^C
RedBoot> thecus_setip
RedBoot> fis load ramdisk
RedBoot> fis load kernel
RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=256M@0xa0000000"
Build ATAG
ATAG_MEM: Overwrite ram_end with real_region_top=0x20000000, memsize=512 M
ATAG_MEM=536870912@0xa0000000, MACH_TYPE=1101
Using base address 0x00200000 and length 0x00160000
Uncompressing Linux....................................................................................
[ 0.000000] Linux version 2.6.25-2-iop32x (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 208
[ 0.000000] CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=0000397f
[ 0.000000] Machine: Thecus N2100
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU0: D VIVT undefined 5 cache
[ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
[ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
[ 0.010000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.010000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=256M0
[ 0.010000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.010000] Console: colour dummy device 80x30
[ 0.010000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.010000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.020000] Memory: 256MB = 256MB total
[ 0.020000] Memory: 213760KB available (2584K code, 268K data, 104K init)
[ 0.250000] Security Framework initialized
[ 0.250000] SELinux: Disabled at boot.
[ 0.250000] Capability LSM initialized
[ 0.250000] Mount-cache hash table entries: 512
[ 0.250000] Initializing cgroup subsys ns
[ 0.250000] Initializing cgroup subsys cpuacct
[ 0.250000] CPU: Testing write buffer coherency: ok
[ 0.250000] net_namespace: 540 bytes
[ 0.250000] NET: Registered protocol family 16
[ 0.260000] PCI: bus0: Fast back to back transfers disabled
[ 0.300000] NET: Registered protocol family 2
[ 0.390000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.390000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.390000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.390000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.390000] TCP reno registered
[ 0.420000] checking if image is initramfs... it is
[ 9.510000] Freeing initrd memory: 43008K
[ 9.520000] NetWinder Floating Point Emulator V0.97 (double precision)
[ 9.520000] audit: initializing netlink socket (disabled)
[ 9.520000] type=2000 audit(9.520:1): initialized
[ 9.520000] VFS: Disk quotas dquot_6.5.1
[ 9.520000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.520000] JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
[ 9.520000] async_tx: api initialized (async)
[ 9.520000] io scheduler noop registered
[ 9.520000] io scheduler anticipatory registered
[ 9.520000] io scheduler deadline registered
[ 9.520000] io scheduler cfq registered (default)
[ 9.560000] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[ 9.570000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A
[ 9.570000] console [ttyS0] enabled
[ 9.840000] brd: module loaded
[ 9.840000] physmap platform flash device: 01000000 at f0000000
[ 9.850000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[ 9.860000] Intel/Sharp Extended Query Table at 0x0031
[ 9.860000] Using buffer write method
[ 9.870000] cfi_cmdset_0001: Erase suspend on write enabled
[ 9.870000] Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000
[ 10.200000] 6 RedBoot partitions found on MTD device physmap-flash.0
[ 10.200000] Creating 6 MTD partitions on "physmap-flash.0":
[ 10.210000] 0x00000000-0x00040000 : "RedBoot"
[ 10.220000] 0x00040000-0x00d40000 : "ramdisk"
[ 10.220000] 0x00d40000-0x00ea0000 : "kernel"
[ 10.230000] 0x00ea0000-0x00fc0000 : "user"
[ 10.240000] 0x00fc0000-0x00fc1000 : "RedBoot config"
[ 10.240000] mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
[ 10.250000] 0x00fe0000-0x01000000 : "FIS directory"
[ 10.260000] mice: PS/2 mouse device common for all mice
[ 10.270000] i2c /dev entries driver
[ 10.280000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.5
[ 10.280000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 10.320000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr )
[ 10.340000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr )
[ 10.340000] NET: Registered protocol family 26
[ 10.350000] TCP bic registered
[ 10.350000] NET: Registered protocol family 1
[ 10.360000] NET: Registered protocol family 17
[ 10.360000] XScale DSP coprocessor detected.
[ 10.370000] registered taskstats version 1
[ 10.370000] rtc-rs5c372 0-0032: setting system clock to 2008-08-28 17:28:19 UTC (1219944499)
[ 10.390000] Freeing init memory: 104K
Loading, please wait...
Begin: Loading essential drivers ...
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system ...
Begin: Running /scripts/local-top ...
Begin: Loading MD modules ...
[ 12.660000] md: raid1 personality registered for level 1
Success: loaded module raid1.
Done.
Begin: Assembling all MD arrays ...
[ 12.720000] md: md0 stopped.
mdadm: no devices found for /dev/md0
Failure: failed to assemble all arrays.
Done.
Begin: Waiting for udev to process events ...
Done.
Done.
Begin: Waiting for root file system ...
Done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda1 does not exist. Dropping to a shell!
BusyBox v1.10.2 (Debian 1:1.10.2-1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
(initramfs)
(initramfs) [ 285.050000] ttyS0: 1 input overrun(s)
cat /proc/cmdline
console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=256M@0xa0000000
(initramfs) [ 297.710000] ttyS0: 1 input overrun(s)
cat /proc/module
/proc/module: No such file or directory
(initramfs) cat /proc/modules
raid1 25024 0 - Live 0xbf017000
md_mod 88212 1 raid1, Live 0xbf000000
(initramfs) ls /dev
console ram2 tty36
cpu_dma_latency ram3 tty37
full ram4 tty38
i2c-0 ram5 tty39
kmem ram6 tty4
kmsg ram7 tty40
md ram8 tty41
md0 ram9 tty42
mem random tty43
mice rtc tty44
mtd0 rtc0 tty45
mtd0ro tty tty46
mtd1 tty0 tty47
mtd1ro tty1 tty48
mtd2 tty10 tty49
mtd2ro tty11 tty5
mtd3 tty12 tty50
mtd3ro tty13 tty51
mtd4 tty14 tty52
mtd4ro tty15 tty53
mtd5 tty16 tty54
mtd5ro tty17 tty55
mtdblock0 tty18 tty56
mtdblock1 tty19 tty57
mtdblock2 tty2 tty58
mtdblock3 tty20 tty59
mtdblock4 tty21 tty6
mtdblock5 tty22 tty60
network_latency tty23 tty61
network_throughput tty24 tty62
null tty25 tty63
port tty26 tty7
psaux tty27 tty8
ptmx tty28 tty9
ram0 tty29 ttyS0
ram1 tty3 ttyS1
ram10 tty30 urandom
ram11 tty31 vcs
ram12 tty32 vcsa
ram13 tty33 zero
ram14 tty34
ram15 tty35
(initramfs)
Reply to: