Re: ARM kernel snapshots - 2.6.27-rc2
> Martin,
> This one is NOT booting on my Thecus N2100.
> Sorry, I still do have to by myself a USB-to-RS232 converter, therefore
> I cannot tell exactly where it (probably) paniced.
> But it seems "stuck" before accessing the disks, and also the amber LED
> keeps blinking.
> I testet the kernel out of memory (via the instructions "how to test a
> kernel without flashing" on my blog, http://blog.coldtobi.de)
It booted fine for me (Allnet 6500 rebrand with 512MB of Ram). Since the
kernel didn't panic, there is probably something wrong with your initramfs.
Please make sure you have tested with a initramfs with correct kernel
modules (sata_sil, ext3, r8169, ...)
RedBoot> fis load ramdisk
RedBoot> fis load kernel
RedBoot> exec
Using base address 0x00200000 and length 0x00160000
Uncompressing Linux.............................................................
[42949372.960000] Initializing cgroup subsys cpu
[42949372.960000] Linux version 2.6.27-rc2-iop32x (Debian 2.6.27~rc2-1~experime8
[42949372.960000] CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=0000397f
[42949372.960000] Machine: Thecus N2100
[42949372.960000] Memory policy: ECC disabled, Data cache writeback
[42949372.960000] CPU0: D VIVT undefined 5 cache
[42949372.960000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, s
[42949372.960000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, s
[42949372.960000] Built 1 zonelists in Zone order, mobility grouping on. Total8
[42949372.960000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 init0
[42949372.960000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[42949372.960000] Console: colour dummy device 80x30
[42949372.960000] Dentry cache hash table entries: 65536 (order: 6, 262144 byte)
[42949372.960000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[42949373.010000] Memory: 512MB = 512MB total
[42949373.010000] Memory: 473472KB available (2656K code, 285K data, 116K init)
[42949373.010000] Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
[42949373.240000] Security Framework initialized
[42949373.240000] SELinux: Disabled at boot.
[42949373.240000] Mount-cache hash table entries: 512
[42949373.240000] Initializing cgroup subsys ns
[42949373.240000] Initializing cgroup subsys cpuacct
[42949373.240000] Initializing cgroup subsys devices
[42949373.240000] CPU: Testing write buffer coherency: ok
[42949373.240000] net_namespace: 832 bytes
[42949373.240000] NET: Registered protocol family 16
[42949373.250000] pci 0000:00:01.0: PME# supported from D1 D2 D3hot D3cold
[42949373.250000] pci 0000:00:01.0: PME# disabled
[42949373.250000] pci 0000:00:02.0: PME# supported from D1 D2 D3hot D3cold
[42949373.250000] pci 0000:00:02.0: PME# disabled
[42949373.250000] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
[42949373.250000] pci 0000:00:04.0: PME# disabled
[42949373.250000] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
[42949373.250000] pci 0000:00:04.1: PME# disabled
[42949373.250000] pci 0000:00:04.2: PME# supported from D0 D1 D2 D3hot
[42949373.250000] pci 0000:00:04.2: PME# disabled
[42949373.250000] PCI: bus0: Fast back to back transfers disabled
[42949373.290000] NET: Registered protocol family 2
[42949373.380000] IP route cache hash table entries: 16384 (order: 4, 65536 byt)
[42949373.380000] TCP established hash table entries: 65536 (order: 7, 524288 b)
[42949373.380000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[42949373.380000] TCP: Hash tables configured (established 65536 bind 65536)
[42949373.380000] TCP reno registered
[42949373.410000] NET: Registered protocol family 1
[42949373.410000] checking if image is initramfs... it is
[42949382.300000] Freeing initrd memory: 43008K
[42949382.300000] NetWinder Floating Point Emulator V0.97 (double precision)
[42949382.300000] audit: initializing netlink socket (disabled)
[42949382.300000] type=2000 audit(9.340:1): initialized
[42949382.300000] VFS: Disk quotas dquot_6.5.1
[42949382.300000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[42949382.300000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[42949382.300000] msgmni has been set to 1009
[42949382.300000] async_tx: api initialized (async)
[42949382.310000] Block layer SCSI generic (bsg) driver version 0.4 loaded (maj)
[42949382.310000] io scheduler noop registered
[42949382.310000] io scheduler anticipatory registered
[42949382.310000] io scheduler deadline registered
[42949382.310000] io scheduler cfq registered (default)
[42949382.350000] Serial: 8250/16550 driver2 ports, IRQ sharing disabled
[42949382.350000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A
[42949382.350000] console [ttyS0] enabled
[42949382.740000] brd: module loaded
[42949382.740000] physmap platform flash device: 01000000 at f0000000
[42949382.750000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[42949382.750000] Intel/Sharp Extended Query Table at 0x0031
[42949382.770000] Using buffer write method
[42949382.770000] cfi_cmdset_0001: Erase suspend on write enabled
[42949382.770000] Searching for RedBoot partition table in physmap-flash.0 at o0
[42949383.100000] 6 RedBoot partitions found on MTD device physmap-flash.0
[42949383.100000] Creating 6 MTD partitions on "physmap-flash.0":
[42949383.110000] 0x00000000-0x00040000 : "RedBoot"
[42949383.120000] 0x00040000-0x00d40000 : "ramdisk"
[42949383.120000] 0x00d40000-0x00ea0000 : "kernel"
[42949383.130000] 0x00ea0000-0x00fc0000 : "user"
[42949383.140000] 0x00fc0000-0x00fc1000 : "RedBoot config"
[42949383.140000] mtd: partition "RedBoot config" doesn't end on an erase blocky
[42949383.160000] 0x00fe0000-0x01000000 : "FIS directory"
[42949383.170000] mice: PS/2 mouse device common for all mice
[42949383.170000] i2c /dev entries driver
[42949383.180000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.5
[42949383.200000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[42949383.210000] pca9532 0-0060: setting platform data
[42949383.210000] Registered led device: n2100:red:satafail0
[42949383.220000] Registered led device: n2100:red:satafail1
[42949383.230000] Registered led device: n2100:blue:usb
[42949383.230000] Registered led device: n2100:red:usb
[42949383.240000] Registered led device: n2100:orange:system
[42949383.250000] Registered led device: n2100:red:system
[42949383.250000] input: N2100 beeper as /class/input/input0
[42949383.320000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr )
[42949383.340000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr )
[42949383.340000] NET: Registered protocol family 26
[42949383.350000] TCP cubic registered
[42949383.350000] NET: Registered protocol family 17
[42949383.360000] XScale DSP coprocessor detected.
[42949383.370000] registered taskstats version 1
[42949383.370000] rtc-rs5c372 0-0032: setting system clock to 2008-08-12 17:03:)
[42949383.390000] Freeing init memory: 116K
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
[42949391.240000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[42949391.250000] eth0: RTL8169sb/8110sb at 0xe0870200, 00:14:fd:10:39:48, XID 7
[42949391.260000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[42949391.270000] eth1: RTL8169sb/8110sb at 0xe0872300, 00:14:fd:10:00:00, XID 0
[42949391.520000] SCSI subsystem initialized
[42949391.680000] usbcore: registered new interface driver usbfs
[42949391.680000] usbcore: registered new interface driver hub
[42949391.700000] usbcore: registered new device driver usb
[42949391.910000] ehci_hcd 0000:00:04.2: EHCI Host Controller
[42949391.910000] ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus n1
[42949391.920000] ehci_hcd 0000:00:04.2: irq 29, io mem 0x800a0400
[42949391.950000] USB Universal Host Controller Interface driver v3.0
[42949391.960000] ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00, driver 10 4
[42949391.970000] usb usb1: configuration #1 chosen from 1 choice
[42949391.970000] hub 1-0:1.0: USB hub found
[42949391.980000] hub 1-0:1.0: 4 ports detected
[42949392.210000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[42949392.230000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNum1
[42949392.230000] usb usb1: Product: EHCI Host Controller
[42949392.230000] usb usb1: Manufacturer: Linux 2.6.27-rc2-iop32x ehci_hcd
[42949392.250000] usb usb1: SerialNumber: 0000:00:04.2
[42949392.250000] uhci_hcd 0000:00:04.0: UHCI Host Controller
[42949392.250000] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus n2
[42949392.270000] uhci_hcd 0000:00:04.0: irq 28, io base 0x90000800
[42949392.270000] usb usb2: configuration #1 chosen from 1 choice
[42949392.270000] hub 2-0:1.0: USB hub found
[42949392.280000] hub 2-0:1.0: 2 ports detected
[42949392.500000] usb usb2: New USB dea0000 tf 0x800a0080 ir9
[42949392.840000] ata2: SATA max UDMA/100 mmio m512@0x800a0000 tf 0x800a00c0 ir9
[42949393.190000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[42949393.250000] ata1.00: ATA-7: ST3200820AS, 3.AAC, max UDMA/133
[42949393.250000] ata1.00: 390721968 sectors, multi 0: LBA48 NCQ (depth 0/32)
[42949393.330000] ata1.00: configured for UDMA/100
[42949393.690000] ata2: SATA link down (SStatus 0 SControl 310)
[42949393.690000] scsi 0:0:0:0: Direct-Access ATA ST3200820AS 3.A5
[42949393.830000] Driver 'sd' needs updating - please use bus_type methods
[42949393.840000] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050)
[42949393.850000] sd 0:0:0:0: [sda] Write Protect is off
[42949393.850000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, A
[42949393.870000] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050)
[42949393.880000] sd 0:0:0:0: [sda] Write Protect is off
[42949393.880000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, A
[42949393.890000] sda: sda1 sda2 sda3 < sda5 sda6 >
[42949393.920000] sd 0:0:0:0: [sda] Attached SCSI disk
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
[42949396.290000] EXT3-fs: INFO: recovery required on readonly filesystem.
[42949396.290000] EXT3-fs: write access will be enabled during recovery.
[42949403.820000] kjournald starting. Commit interval 5 seconds
[42949403.840000] EXT3-fs: sda2: orphan cleanup on readonly fs
[42949403.890000] EXT3-fs: sda2: 2 orphan inodes deleted
[42949403.890000] EXT3-fs: recovery complete.
[42949403.950000] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
--
"rm -rf" only sounds scary if you don't have backups
Reply to: