Re: ARM installer images for etch (4.0) currently broken
Thank you
Is there a step by step guide to installing Debian. I am new to linux
although i successfully flashed Slug to Unslung and Openslug. But i want to
do the debian one right!
I tried using the sercomm utility and reflashed to Debian but it does not
boot up I get 3 beeps and the top light stays orange.
Am i using the flash file which doesnt work? Where do i find the correct
one.
If i go with Debian live and Upslug(Is that better?) which Debian live Image
do i use on P4 PC.
Thanks Again
Rod Whitby-2 wrote:
>
> AndyC73 wrote:
>> Can i currently install Debian using Upslug on windowsXP
>
> Upslug2 is a linux tool for flashing images onto an NSLU2. It does not
> have a windows port as far as I know.
>
> There is a SerComm upgrade tool which does much the same thing and works
> on Windows.
>
> Stay well away from the Linksys EraseAll tool - if you use it with a
> Debian image it will permanently brick your slug (unless you have JTAG
> to recover it). This is because the Debian NSLU2 images do not contain
> RedBoot. All other flashing techniques (including Upslug2 and the
> SerComm tool) are careful not to touch your bootloader.
>
> I would suggest you get a Debian LiveCD, and use it on that windowsXP
> computer to run Debian so you can use Upslug2 to flash the NSLU2.
>
> -- Rod Whitby
> -- NSLU2-Linux Project Lead
>
>
> --
> To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
>
>
--
View this message in context: http://www.nabble.com/ARM-installer-images-for-etch-%284.0%29-currently-broken-tf4306950.html#a12612949
Sent from the debian-arm mailing list archive at Nabble.com.
Reply to: