3com pci-x nic not configuring
Hello,
Have a 3com 3c996b-t PCI-X that won't come up for me.
(broadcom chip on nic)
Running amd64 etch with kernel 2.6.18-5 stock kernel.
Here's the output from lshw:
[snip]
*-pci:1
description: PCI bridge
product: 6311ESB/6321ESB PCI Express to PCI-X Bridge
vendor: Intel Corporation
physical id: 0.3
bus info: pci@01:00.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
*-network DISABLED
description: Ethernet interface
product: NetXtreme BCM5701 Gigabit Ethernet
vendor: Broadcom Corporation
physical id: 2
bus info: pci@06:02.0
logical name: eth4
version: 15
serial: 00:0a:5e:50:44:f5
capacity: 1GB/s
width: 64 bits
clock: 66MHz
capabilities: bus_master cap_list ethernet
physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd
autonegotiation
configuration: autonegotiation=on broadcast=yes
driver=tg3 driverversion=3.65 duplex=half latency=64
link=no mingnt=64 multicast=yes port=twisted pair
resources: iomemory:b8900000-b890ffff irq:82
ifconfig only shows eth1, eth2, and eth3. (Total of 4 nics)
Just eth0 is missing. (my old eth0 was a dlink)
Any help to get this 3com activated would be great!
lshw shows that its disabled, but have no idea how to re-activate it.
Thanks!
Mike
Reply to: