cdrecord fails on usb writer
Hi,
burning CDs with cdrecord fails on my AMD64 debian installation.
The cd writer is an external device connected through USB.
I am currently running a self-compiled 2.6.15 kernel,
but the same issue occurs with the debian default 2.6.12-amd64-generic
kernel.
I did a parallel i386 installation on the same box, also with
the debian 2.6.15 kernel package, and in this installation
cdrecord works well. I assume therefore that it is a kernel
issue. cdrecord versions are the same on both installations.
Attached is the output which is generated from cdrecord (by
the k3b frontend in this case).
Any hints are very welcome :-) I hope it is not one of the
"unsettled 2.6 kernel issues" cdrecord warns about :-/
Thanks and best regards,
Andreas
--
Andreas Fester
mailto:andreas@littletux.net
WWW: http://www.littletux.net
ICQ: 326674288System
-----------------------
K3b Version: 0.12.10
KDE Version: 3.5.1
QT Version: 3.3.5
Kernel: 2.6.15
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4040B A301 (/dev/scd0, /dev/sg5) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
ASUS DVD-ROM E616 1.0 (/dev/hdc, ) at /media/cdrom0 [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.15
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a03 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A301'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 5202 kB/s 29x CD 3x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 28 MB
Total size: 32 MB (03:13.41) = 14506 sectors
Lout start: 32 MB (03:15/31) = 14506 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 345343
Starting to write CD/DVD at speed 24 in dummy SAO mode for single session.
Last chance to quit, starting dummy write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.106s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1176 K BSize: 1176 K
Starting new track at sector: 0
Track 01: 0 of 28 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.105s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 30.710s
Average write speed 6.3x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.007s
/usr/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=4,0,0 speed=24 -dao -dummy driveropts=burnfree -eject -data /home/andreas/Downloads/debian-testing-i386-businesscard.iso
Reply to: