HP nx6125 cdrom problem
I've just installed debian-amd64 on a HP nx6125 AMD Turion(tm) 64
Mobile ML-40 with 2Gb of ram. Most things worked and I've tweaked
other bits with info gathered from the web. One thing I have no idea
about, is that when I boot without a cd in the drive I get a scrolling
message, see dmesg below. When I have a cd in the drive all is OK. I
think the OS sees the cdrom as a scsi drive. Any ideas how I can fix
this or should I scrap all the setting up that I've done and
reinstall?
====
fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda2 / ext3 defaults,errors=remount-ro 0 1
/dev/hda4 /home ext3 defaults 0 2
/dev/hda3 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
sysfs /sys sysfs defaults 0 0
====
dmesg
Bootdata ok (command line is root=/dev/hda2 ro vga=771 noapic nolapic
console=tty0)
Linux version 2.6.14-1-amd64-k8 (Debian 2.6.14-2) (horms@debian.org)
(gcc version 4.0.2 (Debian 4.0.2-2)) #1 Wed Nov 2 20:24:48 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
BIOS-e820: 0000000077fd0000 - 0000000077fefc00 (reserved)
BIOS-e820: 0000000077fefc00 - 0000000077ffb000 (ACPI NVS)
BIOS-e820: 0000000077ffb000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 HP ) @ 0x00000000000fe270
ACPI: RSDT (v001 HP 0944 0x01070520 HP 0x00000001) @
0x0000000077fefc84
ACPI: FADT (v002 HP 0944 0x00000002 HP 0x00000001) @
0x0000000077fefc00
ACPI: MADT (v001 HP 0944 0x00000001 HP 0x00000001) @
0x0000000077fefcb8
ACPI: MCFG (v001 HP 0944 0x00000001 HP 0x00000001) @
0x0000000077fefd14
ACPI: SSDT (v001 HP HPQPpc 0x00001001 MSFT 0x0100000e) @
0x0000000077ff6dde
ACPI: DSDT (v001 HP SB400 0x00010000 MSFT 0x0100000e) @
0x0000000000000000
No mptable found.
On node 0 totalpages: 491375
DMA zone: 3999 pages, LIFO batch:1
Normal zone: 487376 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfec01000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
arch/x86_64/mm/init.c:146: bad pte ffff810002a49fe8(80000000fec01173).
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Checking aperture...
CPU 0: aperture @ e8c2000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro vga=771 noapic nolapic console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2194.538 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1930496k/1965888k available (1895k kernel code, 34728k
reserved, 725k data, 152k init)
Calibrating delay using timer specific routine.. 4395.31 BogoMIPS (lpj=2197658)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02
ACPI: setting ELCR to 0200 (from 0e20)
Apic disabled
checking if image is initramfs... it is
softlockup thread 0 started up.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C046] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.C046] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C046.C0AA._PRT]
ACPI: Power Resource [C1CB] (off)
ACPI: Embedded Controller [C110] (gpe 17)
ACPI: Power Resource [C1B3] (on)
ACPI: Power Resource [C1C3] (on)
ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F3] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0F4] (IRQs *9)
ACPI: PCI Interrupt Link [C0F5] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C0F6] (IRQs *10 11)
ACPI: Power Resource [C25C] (off)
ACPI: Power Resource [C25D] (off)
ACPI: Power Resource [C25E] (off)
ACPI: Power Resource [C25F] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A06
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid SYN010E
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C14
pnp: ACPI device : hid PNP0C02
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: 00:09: ioport range 0x40b-0x40b has been reserved
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: 00:0a: ioport range 0x8000-0x802f could not be reserved
pnp: 00:0a: ioport range 0x8100-0x811f could not be reserved
pnp: match found with the PnP device '00:0c' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: d0400000-d07fffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 88000000-89ffffff
MEM window: 8a000000-8bffffff
PCI: Bridge: 0000:00:14.4
IO window: 1000-1fff
MEM window: d0000000-d03fffff
PREFETCH window: 88000000-89ffffff
PCI: Device 0000:00:04.0 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Device 0000:00:05.0 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt Link [C0F3] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0F3] -> GSI 11 (level,
low) -> IRQ 11
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1133013671.282:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Device 0000:00:04.0 not available because of resource collisions
PCI: Device 0000:00:05.0 not available because of resource collisions
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using
937k, total 131072k
vesafb: mode is 800x600x8, linelength=800, pages=254
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
vesafb: Mode is not VGA compatible
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:08' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:C1C0,PNP0f13:C1C1] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: the driver 'serial' has been registered
ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [C0F0] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:14.6 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
C046 C0AA C1CA C0DC C0E2 C0E7 C1CC C1CD
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 152k freed
Console: switching to colour frame buffer device 100x37
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [C0F2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [C0F2] -> GSI 10 (level,
low) -> IRQ 10
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 10, io mem 0xd0800000
input: AT Translated Set 2 keyboard on isa0060/serio0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [C0F2] -> GSI 10 (level,
low) -> IRQ 10
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 10, io mem 0xd0801000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [C0F2] -> GSI 10 (level,
low) -> IRQ 10
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 10, io mem 0xd0802000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ST9808211A, ATA DISK drive
usb 2-1: new full speed USB device using ohci_hcd and address 2
Probing IDE interface ide1...
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-3: new low speed USB device using ohci_hcd and address 4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:13.0-3
hdc: TSSTcorpCD/DVDW TS-L532M, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 1
Adding 1951888k swap on /dev/hda3. Priority:-1 extents:1 across:1951888k
EXT3 FS on hda2, internal journal
spurious 8259A interrupt: IRQ7.
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
ACPI: CPU0 (power states: C1[C1] C3[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (52 C)
ACPI: Thermal Zone [TZ2] (37 C)
ACPI: Thermal Zone [TZ3] (24 C)
ACPI: Fan [C260] (off)
ACPI: Fan [C261] (off)
ACPI: Fan [C262] (off)
ACPI: Fan [C263] (off)
ACPI: Battery Slot [C175] (battery present)
ACPI: Battery Slot [C174] (battery absent)
ACPI: AC Adapter [C173] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1EC]
ACPI: Lid Switch [C1ED]
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 (1450 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
cpu_init done, current fid 0xe, vid 0x2
powernow-k8: ph2 null fid transition 0xe
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.C046 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C046 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C046 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [C0EF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [C0EF] -> GSI 10 (level,
low) -> IRQ 10
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ATIIXP: port 0x01f0 already claimed by ide0
ATIIXP: port 0x0170 already claimed by ide1
ATIIXP: neither IDE port enabled (BIOS)
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [C0F0] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [C0F0] -> GSI 10 (level,
low) -> IRQ 10
atiixp-modem: no codec available
ACPI: PCI interrupt for device 0000:00:14.6 disabled
tg3.c:v3.42 (Oct 3, 2005)
ACPI: PCI Interrupt Link [C0F6] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0F6] -> GSI 10 (level,
low) -> IRQ 10
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)]
(PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0f:b0:76:29:ce
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0F3] -> GSI 11 (level,
low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:04.0 [103c:308b]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01a11b22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [C0F4] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [C0F4] -> GSI 9 (level,
low) -> IRQ 9
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9]
MMIO=[d0013000-d00137ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929c13f0a]
eth1394: $Rev: 1312 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:02' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
input: PC Speaker
ts: Compaq touchscreen protocol output
NET: Registered protocol family 17
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please
expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
for details.
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803581e0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Not ready -- (Sense key=0x02)
Incompatible medium installed -- (asc=0x30, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
and so on.
Any help gratefully received,
martin
Reply to: