Re: sata disk failure?
On Sat, Feb 12, 2005 at 02:45:18AM +0100, Manuele Rampazzo wrote:
> Hello everybody,
> I'm using an updated sid pure64 and I've got some troubles with my sata
> disks, but I'm not sure if the problem is in the hardware (in disks or
> maybe in the controller) or in the software... Maybe you can give me a
> good suggestion :-)
What kernel, what SATA controller, what driver and what disks are you
using?
> Sometimes disk I/O stops and I'm just able to go to a tty and see
> something like this:
>
> ata2: command 0x35 timeout, stat 0xd0 host_stat 0x21
> ata2: status=0xd0 { Busy }
> SCSI error : <1 0 0 0> return code = 0x8000002
> EOM ILI Current sda: sense = 70 7e
> ASC= 4 ASCQ=a0
> end_request: I/O error, dev sda, sector 215674327
> ATA: abnormal status 0xD0 on port 0x977
> ATA: abnormal status 0xD0 on port 0x977
> ATA: abnormal status 0xD0 on port 0x977
I've seen similar behaviour with certain Seagate disks on sata_sil.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
Reply to: