Etch beta 3 and AlphaServer ES45
Hi,
I recently acquired an ES45 and tried to install Etch using the latest
beta 3 images but unfortunately the installer does not seem to work.
The machine has four 1GHz CPUs and 12 gigabytes of RAM and should
be ok hardware-wise, firmware is the latest available (7.2)
I can only get it as far as aboot loading the kernel + initrd and
then it just hangs.
Here's the output I got through serial console with businesscard
CD and netboot image.
businesscard:
P00>>>boot dqa0 -fl 1
(boot dqa0.0.0.16.0 -flags 1)
block 0 of dqa0.0.0.16.0 is a valid boot block
reading 172 blocks from dqa0.0.0.16.0
bootstrap code read in
base = 32c000, image_start = 0, image_bytes = 15800(88064)
initializing HWRPB at 2000
initializing page table at 2ffff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 0.9b
aboot: switching to OSF/1 PALcode version 1.92
aboot: booting from device 'IDE 0 16 0 0 0 0 0'
aboot: no disklabel found.
iso: Max size:12210 Log zone size:2048
iso: First datazone:28 Root inode number 57344
aboot: loading uncompressed boot/vmlinuz...
aboot: loading compressed boot/vmlinuz...
aboot: zero-filling 1139588 bytes at 0xfffffc0001514774
aboot: loading initrd (4476370 bytes/4371 blocks) at 0xfffffc02ffac8000
aboot: starting kernel boot/vmlinuz with arguments ramdisk_size=16384 root=/dev/ram devfs=mount,dall console=ttyS0
(hangs here)
netboot:
P00>>>boot eia0 -fl "root=/dev/ram ramdisk_size=16384 devfs=mount,dall console=ttyS0"
(boot eia0.0.0.2.2 -flags root=/dev/ram ramdisk_size=16384 devfs=mount,dall console=ttyS0)
Trying BOOTP boot.
Broadcasting BOOTP Request for file: /tftpboot/etch_beta3_alpha.img
Received BOOTP Packet File Name is: /tftpboot/etch_beta3_alpha.img
local inet address: 192.168.0.25
remote inet address: 192.168.0.1
TFTP Read File Name: /tftpboot/etch_beta3_alpha.img
netmask = 255.255.255.0
Server is on same subnet as client.
................................................................
............................
bootstrap code read in
base = 32c000, image_start = 0, image_bytes = 5b8b6d(5999469)
initializing HWRPB at 2000
initializing page table at 2ffff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 0.9b
aboot: switching to OSF/1 PALcode version 1.92
aboot: loading initrd (4573037 bytes/8932 blocks) at 0xfffffc02ffb90000
aboot: starting kernel network with arguments root=/dev/ram ramdisk_size=16384 devfs=mount,dall console=ttyS0
(hangs here)
I tried the same procedures with VGA console, but it did not make any
difference.
I also tried Woody & Sarge CD-images, but it seems that their kernels
are compiled with CONFIG_ALPHA_LEGACY_START_ADDRESS=y and thus don't
work with ES45.
In desperation, I compiled the latest 2.6 kernel git snapshot (as of
yesterday) on my XP1000 which had Etch installed, moved the disk to
the ES45 and tried booting it, but still got the same hang!
The last thing I tried, was CentOS 4.3 CD and it seemed to work just
fine, so I do believe that there is something broken on Etch/Alpha
with the Titan systems (ES45, DS25). I'm not a kernel hacker in any
way, but it seems quite weird that even a self compiled kernel hangs
on boot. Could it be that aboot is broken somehow?
Does anybody have any idea what is going on? I would really,
really like to get Debian running on this machine ;)
Thanks,
Eki
Reply to: