RE: Graphic Card
>From your log file, you have an old Digital TGA2 graphics card,
officially known as either a ZLXp-E1 or ZLXp-E3. I can't tell which
flavor from your log. The E1 was an 8 plane board with 2MB of memory.
The E3 was a 24 bit with Z buffer and could do 12 bit double buffering.
It has 16MB of memory.
DEC released drivers for them and at one point, and it was supported in
XFree86 in later releases. I don't know if anyone has ever ported them
to the XOrg server though. Feel free to take a whack at it.
From: Padiyath Sreekumaran [mailto:Kumar.Padiyath@psi.ch]
Sent: Friday, September 16, 2005 10:11 AM
Subject: Graphic Card
Is there any Unix command which I can use to findout
the Graphic card error? I can work with the machine
remotely. But I donot see any thing on a directly connected
screen. I donot see any error in /var/log/messages.
lspci gives me following output:
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 30)
00:04.0 IDE interface: CMD Technology Inc PCI0646 (rev 01) 00:07.0
Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA Bridge] (rev
43) 00:0c.0 VGA compatible controller: Digital Equipment Corporation
PBXGB [TGA2] (rev 22) 00:14.0 PCI bridge: Digital Equipment Corporation
DECchip 21152 (rev 01) 01:08.0 SCSI storage controller: QLogic Corp.
ISP1020 Fast-wide SCSI (rev
01:09.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c810 (rev 02)
Your help will be appreciated.