Graphic Card
Hello,
Is there any Unix command which I can use to findout
the Graphic card error? I can work with the machine
remotely. But I donot see any thing on a directly connected
screen. I donot see any error in /var/log/messages.
lspci gives me following output:
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 30)
00:04.0 IDE interface: CMD Technology Inc PCI0646 (rev 01)
00:07.0 Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA Bridge]
(rev 43)
00:0c.0 VGA compatible controller: Digital Equipment Corporation PBXGB
[TGA2] (rev 22)
00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 01)
01:08.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev
05)
01:09.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR)
53c810 (rev 02)
Your help will be appreciated.
Regards,
Kumar
------------------------------------------------------------------
Padiyath Sreekumar | Tel: +41.56.310.3643
Paul Scherrer Institut | email: kumar.padiyath@psi.ch
AIT | Office: WHGA/U132
WHGA/U132 | Fax: +41.56.310.3649
CH-5232 Villigen PSI |
Switzerland |
-----------------------------------------------------------------
Reply to: