RE: 2.6.0-test9 kernel....
Actually I'm using an ISA NE2000 clone - all my PCI
slots are full (might be dumping the bttv card soon
to move back to a de500).
...tom
-----Original Message-----
From: Nathan Poznick [mailto:poznick@conwaycorp.net]
Sent: Monday, 27 October 2003 2:27 PM
To: Debian-Alpha-Liste
Subject: Re: 2.6.0-test9 kernel....
Thus spake Thomas Evans:
> I can boot and all seems fine until gdm/X starts - a few seconds
> afterwards, the whole machine hangs.
>
> I have a 164LX/600Mhz/1GB/Adaptec SCSI (I've tried the "old" and the
> new driver)/Permedia2.
>
> I can boot into single user mode, and everything seems fine,
> although oddly, I receive a similar (if not the same) "hanging"
> behavior if I try to switch from run-level 1 to run-level 1 (if I
> do an "init 1" while booted into single user mode).
>
> Has anyone else observed this problem? Any suggestions as to how I
> may be able to track down the offending driver or service?
Out of curiosity, what network card are you using? There appears to be
a bug in the de4x5 driver that can (and does, for myself on alpha, a
couple of other people on ppc32, and someone on i386) cause the system
to hang very soon after the network interface is brought up...
--
Nathan Poznick <poznick@conwaycorp.net>
Who dares to teach must never cease to learn. - John Cotton Dana
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.530 / Virus Database: 325 - Release Date: 22-Oct-2003
Reply to: