Re: ICP Vortex driver fails
On Sun, Apr 06, 2003 at 01:35:10PM -0400, Peter Petrakis wrote:
Hi
> The card looks like its on PCI bus 1. Switching it to a slot
> on PCI bus 0 should allow it to be recognized.
Hu? I don't think there are slots for bus0 available:
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 30)
00:04.0 IDE interface: CMD Technology Inc PCI0646 (rev 01)
00:07.0 Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA Bridge]
(rev 43)
00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 02)
01:08.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev
05)
01:0a.0 SCSI storage controller: ICP Vortex Computersysteme GmbH GDT 6557
The DEC 21142-Chip is onboard, I have only 3 32bit and 2 64bit PCI-Slots
available (mixed with some ISA-Slots, which I don't need).
> If you want it
> to work in the PCI slot its currently in please try the patch
> mentioned below.
>
> http://lists.suse.com/archive/suse-axp/2001-Jul/0012.html
>
> Let me know if it works (it should). Alas, I don't have an ICP here
> to debug the driver any further.
I try first a new kernel (2.4.21pre7) and then that link. I report the
result on the list.
Jörg
--
Signature not available yet
Reply to: