Problems with 2.2 kernels on noritake (AS1000A)
Hello,
I cannot run any 2.2 kernel on AS 1000A - noritake.
I can see, that kernel starts booting, but after while (I cannot see where)
it switch back to "blue screen" and:
halted CPU0
halt code = 6
double halt error
PC=fffffc0000319f80
At this moment, I'm running on 2.0.35 from:
ftp://ftp.digital.com/pub/linux/alphalinux/Linux-Alpha/Kernels/alpha-sources-2.0.35-0.1.tar.gz
but I have to boot mikasa kernel first, only after booting this kernel I can
boot noritake kernel ...
Boot messages from booting mikasa:
Command line: init=/bin/sh bootdevice=fd0 bootfile=vmlinux.gz
Alpha PCI BIOS32 revision 0.03
Probing PCI hardware.
common_fixup: bus 2 slot 0x2 SRM IRQ 0x9 changed to 0x0
common_fixup: bus 2 slot 0x0 SRM IRQ 0x5 changed to 0x0
tga_console_init: TGA not found!!! :-(
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
Calibrating delay loop.. ok - 263.72 BogoMIPS
Memory: 254880k available
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Linux version 2.0.34 (root@linux00.amt.tay1.dec.com) (gcc version 2.7.2.3) #2 Thu May 7 11:46:07 EDT 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp0 at 0x03bc, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
Ramdisk driver initialized : 16 ramdisks of 4096K size
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
qlogicisp : new isp1020 revision ID (2)
scsi0 : QLogic ISP1020 SCSI on PCI bus 2 device 0 irq 0 base 0x9800
and from booting noritake after mikasa:
Command line: bootdevice=fd0 bootfile=vmlinux.gz
Alpha PCI BIOS32 revision 0.03
...NOT modifying existing (SRM) PCI configuration
Probing PCI hardware.
PCI bridge optimization.
Cache L2: Not supported.
CPU-PCI posted write: off.Changed! Now on.
CPU-Memory posted write: off.Changed! Now on.
PCI-Memory posted write: off.Changed! Now on.
PCI burst: off.Changed! Now on.
check_behind_io: ALREADY OK! bus 2 slot 0 base 0x9001
common_fixup: bus 2 slot 0x0 SRM IRQ 0x0 changed to 0x11
tga_console_init: TGA not found!!! :-(
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
Calibrating delay loop.. ok - 263.72 BogoMIPS
Memory: 255040k available
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
VFS: Diskquotas version dquot_5.6.0 initialized
Linux version 2.0.35 (root@ccdec.tuke.sk) (gcc version egcs-2.90.27 980315 (egcs-1.0.2 release)) #3 Thu Feb 11 10:54:51 CET 1999
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp0 at 0x03bc, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
loop: registered device at major 7
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
qlogicisp : new isp1020 revision ID (2)
I also tried to pull out all devices from PCI/ISA slots with no success ...
I tried to install NetBSD with no problems ...
I want to upgrade to potato from slink ... can potato run with some 2.0 kernel?
And what 2.0 kernels are known to work on alpha? Which sources, patches ...
Thanx for your help ... Bye ...
--
/\ Tomas Macak
/ \ e-mail: Tomas.Macak@tuke.sk HomePage: http://www.tuke.sk/tmacak/
/ \
/ \ We all know Linux is great... it does infinite loops in 5 seconds.
/________\ -- Linus Torvalds
Reply to: