debian kernel patches break miata kernels and warps X !?
Hi,
This is a follow-up to my earlier reported `new MIATA' problems. I
*really* struggled with this, a long time, so please bear with me if I'm
slightly vexed ;/
My SCSI disk kept being ignored by the kernels generated from debian
kernel-source-2.0.33. Using a virgin 2.0.33 kernel fixed it. Apparently
some of the (i386?) patches to the Debian kernel are in conflict with the
current generation miata (PWS 500a). We should indicate this somewhere,
like in the nano-HOWTO.
Anyway, the configuration that works for the SCSI (it still does not fully
work, see below) is as follows:
Facts: The kernel is standard 2.0.33
+ alpha-patches-2.0.32-0.1 from gatekeeper
+ axp-2.0.33-miata of Loic Prylli
+ menuconfig-alpha.2033 (sic).
with the .config file included below.
What I'd like to ask is the following: when running startx I now get
messages
_X11TransSocketUnixConnect: Can't connect: errno = 2
instead of an X screen. Running just X and starting clients works fine.
Do you know if the debian patches changes something in the network code and
exploits it afterwards in a way that I've lost by compiling from a fresh
kernel source?
Other notes:
* I have a Matrox Millenium II (4M) that works fine in 16bpp
1600x1200 mode so that part is very nice :)
* I (still) cannot access the network at all: the tulip driver seemingly
functions perfectly except it does not actually access the card :( Info
below...
Here are the hard data ... any (further) help will be greatly appreciated!
Regards,
Kristoffer
======================================================================
Script started on Wed Apr 29 22:17:09 1998
rabaud# cat /usr/src/linux/.config
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
CONFIG_NATIVE=y
# CONFIG_ALPHA_AVANTI is not set
# CONFIG_ALPHA_XL is not set
# CONFIG_ALPHA_XLT is not set
# CONFIG_ALPHA_CABRIOLET is not set
# CONFIG_ALPHA_EB66 is not set
# CONFIG_ALPHA_EB66P is not set
# CONFIG_ALPHA_EB64P is not set
# CONFIG_ALPHA_EB164 is not set
# CONFIG_ALPHA_PC164 is not set
# CONFIG_ALPHA_LX164 is not set
# CONFIG_ALPHA_SX164 is not set
# CONFIG_ALPHA_JENSEN is not set
# CONFIG_ALPHA_NONAME is not set
# CONFIG_ALPHA_MIKASA is not set
# CONFIG_ALPHA_NORITAKE is not set
# CONFIG_ALPHA_ALCOR is not set
CONFIG_ALPHA_MIATA=y
# CONFIG_ALPHA_SABLE is not set
# CONFIG_ALPHA_BOOK1 is not set
# CONFIG_ALPHA_RUFFIAN is not set
# CONFIG_ALPHA_P2K is not set
CONFIG_PCI=y
CONFIG_ALPHA_EV5=y
CONFIG_ALPHA_PYXIS=y
# CONFIG_ALPHA_SRM is not set
# CONFIG_KGDB is not set
# CONFIG_SERIAL_ECHO is not set
CONFIG_TGA_CONSOLE=y
CONFIG_VGA_CONSOLE=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_EM86=m
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
CONFIG_SYN_COOKIES=y
# CONFIG_RST_COOKIES is not set
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_VERBOSE is not set
CONFIG_IP_MASQUERADE=y
#
# Protocol-specific masquerading support will be built as modules.
#
# CONFIG_IP_MASQUERADE_IPAUTOFW is not set
# CONFIG_IP_MASQUERADE_ICMP is not set
# CONFIG_IP_TRANSPARENT_PROXY is not set
# CONFIG_IP_ALWAYS_DEFRAG is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_IP_ALIAS=m
# CONFIG_ARPD is not set
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
#
#
#
CONFIG_IPX=y
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_ISP=y
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_EEXPRESS_PRO100B is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=m
# CONFIG_DGRS is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
# CONFIG_MINIX_FS is not set
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=m
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_H8 is not set
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
# CONFIG_ADLIB is not set
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_UART6850 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
CONFIG_AUDIO=y
CONFIG_MIDI=y
CONFIG_YM3812=y
SBC_BASE=220
SBC_IRQ=5
SBC_DMA=1
SB_DMA2=5
SB_MPU_BASE=320
SB_MPU_IRQ=-1
DSP_BUFFSIZE=65536
# CONFIG_LOWLEVEL_SOUND is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
rabaud# cat /proc/pci
PCI devices found:
Bus 1, device 8, function 0:
SCSI storage controller: Q Logic ISP1020 (rev 5).
Medium devsel. IRQ 36. Master Capable. Latency=32.
I/O at 0x9000.
Non-prefetchable 32 bit memory at 0xb100000.
Bus 0, device 20, function 0:
PCI bridge: DEC DC21152 (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Min Gnt=4.Max Lat=4.
Non-prefetchable 32 bit memory at 0x10100.
I/O at 0x22809190.
Non-prefetchable 32 bit memory at 0xb100b10.
I/O at 0x1fff0.
Bus 0, device 12, function 0:
VGA compatible controller: Matrox Millennium II (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 32. Master Capable. Latency=32.
Prefetchable 32 bit memory at 0x9000000.
Non-prefetchable 32 bit memory at 0xa000000.
Non-prefetchable 32 bit memory at 0xa800000.
Bus 0, device 7, function 0:
Non-VGA device: Intel 82378IB (rev 67).
Medium devsel. Master Capable. No bursts.
Bus 0, device 4, function 0:
IDE interface: CMD 646 (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Min Gnt=2.Max Lat=4.
I/O at 0x8000.
Bus 0, device 3, function 0:
Ethernet controller: DEC DC21142 (rev 48).
Medium devsel. Fast back-to-back capable. IRQ 24. Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0x8800.
Non-prefetchable 32 bit memory at 0xb000000.
rabaud# cat /proc/interrupts
1: 827 keyboard
6: 6 + floppy
12: 2022 PS/2 Mouse
14: 3 + ide0
24: 9 eth0
36: 2588 + qlogicisp
rabaud# ./tulip-diag -a
tulip-diag.c:v1.01 4/17/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Chip Index #1: Found a DC21142 Tulip card at 0x8800.
Digital DS21142 Tulip chip registers at 0x8800:
ffa0e000 ffffffff ffffffff 57b3e040 57b3e240 f0000000 b2420200 fbfffbff
e0000000 fffd83ff ffffffff fffe0000 000020c7 ffff0001 fffbffff 8ff00008
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
The Rx process state is 'Stopped'.
The Tx process state is 'Stopped'.
Transmit stopped, Receive stopped, full-duplex.
The transmit threshold is 72.
Port selection is 10mpbs-serial, full-duplex.
EEPROM transceiver/media description for the DC21142 chip.
Leaf node at offset 30, default media type 0800 (Autosense).
5 transceiver description blocks:
Serial transceiver for 10baseT (media type 0).
Serial transceiver for 10baseT-Full Duplex (media type 4).
Serial transceiver for 10base2 (media type 1).
Serial transceiver for AUI (media type 2).
MII interface PHY 0 (media type 11).
MII PHY found at address 5 (782d).
MII PHY #5 transceiver registers:
3100 782d 2000 5c00 01e1 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 8040
8000 0045 0000 3000 a3b9 0080 8c05 001d.
rabaud# ./tulip-diag -e
tulip-diag.c:v1.01 4/17/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Chip Index #1: Found a DC21142 Tulip card at 0x8800.
EEPROM transceiver/media description for the DC21142 chip.
Leaf node at offset 30, default media type 0800 (Autosense).
5 transceiver description blocks:
Media 10baseT, block type 2.
Serial transceiver for 10baseT (media type 0).
GP pin direction 08ff GP pin data 00f0.
Media 10baseT-Full Duplex, block type 2.
Serial transceiver for 10baseT-Full Duplex (media type 4).
GP pin direction 08ff GP pin data 00f0.
Media 10base2, block type 2.
Serial transceiver for 10base2 (media type 1).
GP pin direction 08ff GP pin data 00f0.
Media AUI, block type 2.
Serial transceiver for AUI (media type 2).
GP pin direction 08ff GP pin data 00f0.
Media MII, block type 3.
MII interface PHY 0 (media type 11).
MII PHY found at address 5 (782d).
MII PHY #5 transceiver registers:
3100 782d 2000 5c00 01e1 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 8040
8000 0045 0000 3000 a3b9 0080 c705 001d.
rabaud# exit
Script done on Wed Apr 29 22:18:29 1998
======================================================================
Kristoffer Høgsbro Rose, Ph.D., prof.associé <Kristoffer.Rose@ENS-Lyon.FR>
Laboratoire de l'Informatique du Parallélisme équipe PLUME, bureau LR5-026
Ecole Normale Supérieure de Lyon; 46, Allée d'Italie; F-69364 Lyon 07 cedex
phone: +33(0)4 7272 8642; fax:...8080 <http://www.ens-lyon.fr/~krisrose>
--
To UNSUBSCRIBE, email to debian-alpha-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: