Re: Etch Beta 3: BRLTTY not installed

[Sebastian Dellit <sebo@blinzeln.de>]

Hoppa Samuel and all readers,

on Friday, December 15, 2006 at 6:55:52 AM means Samuel Thibault:
> Sebastian Dellit, le Thu 14 Dec 2006 19:11:41 +0100, a écrit :
>> on Thursday, December 14, 2006 at 7:08:29 PM means Samuel Thibault:
>> > Sebastian Dellit, le Thu 14 Dec 2006 10:22:46 +0100, a écrit :
>> >> Now, I install the vario 40 on ttyUSB0 with a serial2usb converter.
>> >> When I restart the computer, brltty didn't start my braille terminal.
>> 
>> > Was it properly installed at least?
>> 
>> No,

> Ah, so even that is a problem.  Could you check that when booting the
> netinst CD (in the shell in console 2), you have a

> /usr/lib/finish-install.d/05brltty

> file, and not

> /usr/lib/finish-install.d/50brltty

Moment please. :-) I means, that I install debian with my braille on
ttyS0 and after installing, I reboot the computer. The braille works!
After this I put the braille on ttyUSB0 and change the settings in the
brltty.conf. I restart the computer and the braille don't work!

The braille work after reboot on ttyS0, but not on ttyUSB0.

Do you know what I means? :-)

I try it again. I change the settings in the brltty.conf to ttyS0 (and
connect the braille on ttyS0) and reboot the computer. The braille
start. Than I reconfigure the settings to ttyUSB 0 (USB0, and connect
the braille via serial2usb converter) and reboot the computer again.
The braile don't work.

I must start the brltty again with the parameters before the braille
works.

>> > Could you give us the /etc/brltty.conf file that was generated?
>> 
>> # This is a configuration file for the BRLTTY application.

> Mmm, I guess this file comes from your own installation of the brltty
> package?

Yes right, the original brltty.conf has only 3 lines. Braille,
dev, and text table.

>> #braille-driver bd      # Braudi
>> #braille-driver bl      # BrailleLite
>> braille-driver  bm      # Baum
>> #braille-driver bn      # BrailleNote
>> #braille-driver cb      # CombiBraille
>> #braille-driver ec      # EcoBraille

> I guess you did this configuration by hand? (as well as others in this
> file).

Yes. I change the settings by hand. It is wrong?
-- 
Best regards Sebastian 
ICQ: 264706583 / MSM: sebo@blinzeln.de / Skype: sebo_de
E-Mail: sebo@blinzeln.de / Web: www.blindzeln.de