[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: out of memory with 2.6.15

Erik C.J. Laan wrote:

Christian T. Steigies wrote:

Moin,
On Sat, Feb 04, 2006 at 12:10:13PM +0100, Erik C.J. Laan wrote:

[snip]

I'd like to test that 2.6.15 kernel on my Mac Quadra650.


Yes, that would be good to know! I put a copy at

http://people.debian.org/~cts/debian-m68k/linux-image/


Alas,
It does not work. Looks like SCSI has some problems. It finally dies with Aieee, not syncing, killing interrupt handler. 

The boot-log is attached.

Erik.
--
--------------------------------------------------------------------------
Erik C.J. Laan				elaan at dds.nl
Please reply below the message, please cut unrelevant pieces from a reply.
--------------------------------------------------------------------------

Linux version 2.6.15-1-mac (Debian 2.6.15-4) (maks@sternwelten.at) (gcc version6Detected Macintosh model: 36
VIA1 at 50f00000 is a 6522 or clone
VIA2 at 50f02000 is <6>a 6522 or clone
Apple Macintosh Quadra 650
Built 1 zonelists
Kernel command line: root=/dev/sdc2 mac53c9x=1,0 debug=ser console=tty0
Killing onboard sonic... Done.
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Linux version 2.6.15-1-mac (Debian 2.6.15-4) (maks@sternwelten.at) (gcc version6Detected Macintosh model: 36
VIA1 at 50f00000 is a 6522 or clone
VIA2 at 50f02000 is <6>a 6522 or clone
Apple Macintosh Quadra 650
Built 1 zonelists
Kernel command line: root=/dev/sdc2 mac53c9x=1,0 debug=ser console=tty0
Killing onboard sonic... Done.
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 50072k/53248k available (1840k kernel code, 1164k data, 108k init)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NuBus: Scanning NuBus slots.
Slot D:
  Board resource:
    type: [cat 0x1 type 0x0 hw 0x0 sw 0x0]
    name: EtherNet card
    board id: 0x8
    vendor info:
    ID: CNet Technology, Inc.
    revision: N-07E
    part: CN420MAC II/E
  Function 0x80:
    type: [cat 0x4 type 0x1 hw 0x0 sw 0x1]
    name: Network_Ethernet_Apple_3Com
    memory offset: 0x000d0000
    MAC address: 00:80:ad:01:00:27
  Function 0x81:
    type: [cat 0x2 type 0x1 hw 0x0 sw 0x0]
    name: Test TypApple Ethernet ROM
    unknown resource 20, data 0x000012
    unknown resource 21, data 0x004321
    unknown resource 22, data 0x00000c
    unknown resource 23, data 0x00000c
SCSI subsystem initialized
audit: initializing netlink socket (disabled)
audit(0.790:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
macfb: framebuffer at 0xf9001000, mapped to 0xd0001000, size 480k
macfb: mode is 640x480x8, linelength=1024
macfb: scrolling: redraw
fbcon_startup: No VBL detected, using timer based cursor.
mac_delete_irq: tried to remove invalid irq
Console: switching to colour frame buffer device 80x30
fb0: Macintosh DAFB built-in frame buffer device
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
mac_esp: io base at 0x50f10000
esp: using quick version
esp: addr at 0x50f10000
SCSI ID 7 Clk 16MHz CCF=4 TOut 138 NCR53C9x(esp236)

mac_esp: 1 esp controllers found
scsi0 : ESP236 (NCR53C9x)
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c890 this_residual=36
esp0: Forcing async for target 0
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c890 this_residual=96
esp0: Forcing async for target 0
  Vendor: DEC       Model: DSP3053LS         Rev: X442
  Type:   Direct-Access                      ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c790 this_residual=36
esp0: Forcing async for target 0
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c790 this_residual=96
esp0: Forcing async for target 0
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c790 this_residual=36
esp0: Forcing async for target 1
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c790 this_residual=96
esp0: Forcing async for target 1
  Vendor: DEC       Model: DSP3053LS         Rev: X441
  Type:   Direct-Access                      ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c690 this_residual=36
esp0: Forcing async for target 1
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c690 this_residual=96
esp0: Forcing async for target 1
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c690 this_residual=36
esp0: Forcing async for target 2
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c690 this_residual=96
esp0: Forcing async for target 2
  Vendor: DEC       Model: DSP3053LS         Rev: X441
  Type:   Direct-Access                      ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c590 this_residual=36
esp0: Forcing async for target 2
esp0: yieee, bytes_sent < 0!
esp0: csz=96 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c590 this_residual=96
esp0: Forcing async for target 2
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c590 this_residual=36
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=130 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c590 this_residual=130
esp0: Forcing async for target 3
  Vendor: QUANTUM   Model: MAVERICK 540S     Rev: 0901
  Type:   Direct-Access                      ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c490 this_residual=36
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=130 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c490 this_residual=130
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c490 this_residual=36
esp0: Forcing async for target 4
esp0: yieee, bytes_sent < 0!
esp0: csz=44 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c490 this_residual=44
esp0: Forcing async for target 4
  Vendor: HP        Model: CD-Writer 6020    Rev: 1.07
  Type:   CD-ROM                             ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c390 this_residual=36
esp0: Forcing async for target 4
esp0: yieee, bytes_sent < 0!
esp0: csz=44 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c390 this_residual=44
esp0: Forcing async for target 4
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c390 this_residual=36
esp0: Forcing async for target 6
  Vendor: ARCHIVE   Model: Python 28388-XXX  Rev: 4.94
  Type:   Sequential-Access                  ANSI SCSI revision: 02
esp0: yieee, bytes_sent < 0!
esp0: csz=36 fifocount=0 ecount=512
esp0: use_sg=1 ptr=0303c290 this_residual=36
esp0: Forcing async for target 6
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 0
SCSI device sda: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 0
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 0
SCSI device sda: drive cache: write through
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 0
SCSI device sda: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 0
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 0
SCSI device sda: drive cache: write through
 sda: [mac] sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 1
SCSI device sdb: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 1
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 1
SCSI device sdb: drive cache: write through
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 1
SCSI device sdb: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 1
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 1
SCSI device sdb: drive cache: write through
 sdb: [mac] sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 2
SCSI device sdc: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 2
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 2
SCSI device sdc: drive cache: write through
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 2
SCSI device sdc: 1046532 512-byte hdwr sectors (536 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 2
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 2
SCSI device sdc: drive cache: write through
 sdc: [mac] sdc1 sdc2
sd 0:0:2:0: Attached scsi disk sdc
esp0: yieee, bytes_sent < 0!
esp0: csz=18 fifocount=0 ecount=512
esp0: use_sg=0 ptr=0305dea0 this_residual=252
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 3
SCSI device sdd: 1057758 512-byte hdwr sectors (542 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 3
SCSI device sdd: drive cache: write through
esp0: yieee, bytes_sent < 0!
esp0: csz=8 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=8
esp0: Forcing async for target 3
SCSI device sdd: 1057758 512-byte hdwr sectors (542 MB)
esp0: yieee, bytes_sent < 0!
esp0: csz=4 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=4
esp0: Forcing async for target 3
esp0: yieee, bytes_sent < 0!
esp0: csz=24 fifocount=0 ecount=512
esp0: use_sg=1 ptr=03052e00 this_residual=32
esp0: Forcing async for target 3
SCSI device sdd: drive cache: write through
 sdd: unknown partition table
sd 0:0:3:0: Attached scsi disk sdd
input: Macintosh mouse button emulation as /class/input/input0
adb: Mac II ADB Driver v1.0 for Unified ADB
adb: starting probe task...
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (ext2 filesystem) readonly.
EXT2-fs error (device sdc2): ext2_check_page: bad entry in directory #175785: i0attempt to access beyond end of device
sdc2: rw=0, want=134938114, limit=1046468
Buffer I/O error on device sdc2, logical block 2214952704
attempt to access beyond end of device
sdc2: rw=0, want=2152080610, limit=1046468
Buffer I/O error on device sdc2, logical block 1076040304
attempt to access beyond end of device
sdc2: rw=0, want=12646410, limit=1046468
Buffer I/O error on device sdc2, logical block 6323204
attempt to access beyond end of device
sdc2: rw=0, want=4069644798, limit=1046468
Buffer I/O error on device sdc2, logical block 2034822398
attempt to access beyond end of device
sdc2: rw=0, want=932721666, limit=1046468
Buffer I/O error on device sdc2, logical block 2613844480
attempt to access beyond end of device
sdc2: rw=0, want=3791257794, limit=1046468
Buffer I/O error on device sdc2, logical block 4043112544
attempt to access beyond end of device
sdc2: rw=0, want=3925891098, limit=1046468
Buffer I/O error on device sdc2, logical block 1962945548
attempt to access beyond end of device
sdc2: rw=0, want=13371394, limit=1046468
Buffer I/O error on device sdc2, logical block 6685696
attempt to access beyond end of device
sdc2: rw=0, want=1477974526, limit=1046468
Buffer I/O error on device sdc2, logical block 738987262
attempt to access beyond end of device
sdc2: rw=0, want=167831042, limit=1046468
Buffer I/O error on device sdc2, logical block 83915520
attempt to access beyond end of device
sdc2: rw=0, want=100401358, limit=1046468
attempt to access beyond end of device
sdc2: rw=0, want=33616018, limit=1046468
attempt to access beyond end of device
sdc2: rw=0, want=3925793938, limit=1046468
attempt to access beyond end of device
sdc2: rw=0, want=3633401478, limit=1046468
attempt to access beyond end of device
sdc2: rw=0, want=12717058, limit=1046468
MacII ADB: listen command with no data: 2b!
MacII ADB: listen command with no data: 3b!
*** ADDRESS ERROR ***   FORMAT=2
Current process id is 671
BAD KERNEL TRAP: 00000000
Modules linked in:
PC: [<000261fe>] notifier_call_chain+0x20/0x3e

SR: 2700  SP: 03063de8  a2: 03044c00
d0: 000000be    d1: 00000000    d2: 00000004    d3: 0000000a
d4: 00000008    d5: 03063eb4    a0: 6db6db6d    a1: 00000006
Process kadbprobe (pid: 671, stackpage=03045c00)
Stack from 03063de8:
        00000000 00000004 0000000a 00000008 03063eb4 6db6db6d 00000006 03044c00
        000000be ffffffff 00000000 27000002 61fe200c 6db6db6c 003f6ffe 0000000a
        00000004 0000003f 00002600 50f00000 0012a0f2 03063f60 0000000a 00000004
        00000004 0021c78c 03063eb4 03063f2c 03063f84 00007940 0000000a 00129f98
        03063eb4 00000004 00000002 001292d6 00008a00 0000000a 03063eb4 00000002
        0023c83c 00000000 0001bfb2 00000000 00003fc2 00000006 50f00000 03063eb4
Call Trace: [<00002946>] inthandler+0x2a/0x2c
 [<0001bfb2>] printk+0x0/0x18
 [<00019308>] __wake_up+0x0/0x2e
 [<001292d6>] adb_request+0x0/0x134
 [<00129022>] adb_scan_bus+0x1da/0x1e8
 [<001a4016>] __func__.1+0x9966/0x24ba0
 [<00019308>] __wake_up+0x0/0x2e
 [<000261de>] notifier_call_chain+0x0/0x3e
 [<00019308>] __wake_up+0x0/0x2e
 [<00129de4>] macii_send_request+0xc/0x32
 [<00127864>] adb_message_handler+0x18/0x68
 [<00026200>] notifier_call_chain+0x22/0x3e
 [<00010100>] slogn+0x15a/0x19a
 [<000261de>] notifier_call_chain+0x0/0x3e
 [<00129224>] do_adb_reset_bus+0x142/0x1ca
 [<0001bfb2>] printk+0x0/0x18
 [<00129074>] adb_probe_task+0x44/0x6c
 [<001ba91e>] __func__.1+0x2026e/0x24ba0
 [<00002c1e>] kernel_thread+0x3c/0x50

Kernel panic - not syncing: Aiee, killing interrupt handler!
Reply to: