Tried Ricardo Mottola's (sp?) 2.6.10
Hi,
A while ago Rocard Mottola (sp?) said he had compiled 2.6.10 with some
fixes from Brad and/or Finn (don't remember). He also asked anyone
interested in trying this kernel to mail him. I did, but only today
found time to test this kernel. It works better that any 2.6.7 or 2.6.8
kernel I tried before, as it gets past the initializing of the onboard
Sonic. It hangs at or after "adb: starting probe task" message. Right
now I've started it a seocnd time to verify. As is hasn't yet gone into
multi-user mode I can not try to login with ssh. Also I notice it detect
the second NIC in the Nubus slot but has not (yet) connected it to an
"ethx"-device. Should that happen before or after starting the adb probe
task?
If I press a key now nothing happens. The first time around I got a
continues stream of messages something like: "Spurious interrupt
detected #xx". Where xx were numbers upto eighty-something (as far as I
could correctly read the fast-scrolling messages). The log is here:
Linux version 2.6.10-m68k (multix@aragorn) (gcc version 3.0.4) #7 Tue
Jan 11 14:
30:06 CET 2005
Detected Macintosh model: 36
VIA1 at 50f00000 is a 6522 or clone
VIA2 at 50f02000 is <6>a 6522 or clone
Apple Macintosh Quadra 650
Built 1 zonelists
Kernel command line: root=/dev/sdb3 mac53c9x=1,0 debug=ser console=tty0
Killing onboard sonic... Done.
PID hash table entries: 128 (order: 7, 2048 bytes)
Console: colour dummy device 80x25
Linux version 2.6.10-m68k (multix@aragorn) (gcc version 3.0.4) #7 Tue
Jan 11 14:
30:06 CET 2005
Detected Macintosh model: 36
VIA1 at 50f00000 is a 6522 or clone
VIA2 at 50f02000 is <6>a 6522 or clone
Apple Macintosh Quadra 650
Built 1 zonelists
Kernel command line: root=/dev/sdb3 mac53c9x=1,0 debug=ser console=tty0
Killing onboard sonic... Done.
PID hash table entries: 128 (order: 7, 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 22308k/24576k available (1440k kernel code, 720k data, 84k init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
NuBus: Scanning NuBus slots.
Slot D:
Board resource:
type: [cat 0x1 type 0x0 hw 0x0 sw 0x0]
name: EtherNet card
board id: 0x8
vendor info:
ID: CNet Technology, Inc.
revision: N-07E
part: CN420MAC II/E
Function 0x80:
type: [cat 0x4 type 0x1 hw 0x0 sw 0x1]
name: Network_Ethernet_Apple_3Com
memory offset: 0x000d0000
MAC address: 00:80:ad:01:00:27
Function 0x81:
type: [cat 0x2 type 0x1 hw 0x0 sw 0x0]
name: Test TypApple Ethernet ROM
unknown resource 20, data 0x000012
unknown resource 21, data 0x004321
unknown resource 22, data 0x00000c
unknown resource 23, data 0x00000c
SCSI subsystem initialized
macfb: framebuffer at 0xf9001000, mapped to 0xd0001000, size 480k
macfb: mode is 640x480x8, linelength=1024
macfb: scrolling: redraw
fbcon_startup: No VBL detected, using timer based cursor.
mac_delete_irq: tried to remove invalid irq
Console: switching to colour frame buffer device 80x30
fb0: Macintosh DAFB built-in frame buffer device
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Checking for internal Macintosh ethernet (SONIC).. yes
sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de
eth0: onboard / comm-slot SONIC at 0x50f0a000
eth0: revision 0x9724, using 16 bit DMA and register offset 0
MAC 08:00:07:fc:89:7a IRQ 3
scsi HBA driver Macintosh NCR5380 SCSI didn't set a release method.
mac_esp: io base at 0x50f10000
esp: using quick version
esp: addr at 0x50f10000
SCSI ID 7 Clk 16MHz CCF=4 TOut 138 NCR53C9x(esp236)
mac_esp: 1 esp controllers found
scsi0 : ESP236 (NCR53C9x)
elevator: using anticipatory as default io scheduler
Vendor: DEC Model: DSP3053LS Rev: X442
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: DSP3053LS Rev: X441
Type: Direct-Access ANSI SCSI revision: 02
Vendor: DEC Model: DSP3053LS Rev: X441
Type: Direct-Access ANSI SCSI revision: 02
Vendor: QUANTUM Model: MAVERICK 540S Rev: 0901
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: CD-Writer 6020 Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
Vendor: ARCHIVE Model: Python 28388-XXX Rev: 4.94
Type: Sequential-Access ANSI SCSI revision: 02
SCSI device sda: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sda: drive cache: write through
sda: [mac] sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sdb: drive cache: write through
sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 1046532 512-byte hdwr sectors (536 MB)
SCSI device sdc: drive cache: write through
sdc: [mac] sdc1 sdc2
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
SCSI device sdd: 1057758 512-byte hdwr sectors (542 MB)
SCSI device sdd: drive cache: write through
SCSI device sdd: 1057758 512-byte hdwr sectors (542 MB)
SCSI device sdd: drive cache: write through
sdd: [mac] sdd1 sdd2 sdd3 sdd4
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
input: Macintosh mouse button emulation
adb: Mac II ADB Driver v1.0 for Unified ADB
mice: PS/2 mouse device common for all mice
input: m68k beeper
NET: Registered protocol family 2
adb: starting probe task...
Thanks for fixing the onboard Sonic problem, Erik.
--
--------------------------------------------------------------------------
Erik C.J. Laan elaan at dds.nl
Please reply below the message, please cut unrelevant pieces from a reply.
--------------------------------------------------------------------------
Reply to: