Re: dvd+rw-tools 7.1, Blu-Ray, and INVALID FIELD IN CDB on session close
New problem: After using xorriso successfully for several burns, now it
works no longer, but fails with "Invalid address" almost immediately after
formatting a new blank BD-R disc.
$ xorriso -dev /dev/sr1 -volid "etc" -add * -- -commit_eject all
xorriso 0.4.8 : RockRidge filesystem manipulator, libburnia project.
xorriso : UPDATE : Thank you for being patient for 1 seconds
Drive current: -dev '/dev/sr1'
Media current: BD-R sequential recording
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data, 23.3g free
Volume id : 'ISOIMAGE'
xorriso : WARNING : -volid text problematic as automatic mount point name
xorriso : WARNING : -volid text does not comply to ISO 9660 / ECMA 119 rules
xorriso : WARNING : Pattern expansion of wildcards "*?[" is disabled by command -disk_pattern or -pathspecs
xorriso : WARNING : Pattern seen: [Eng].txt
Added to ISO image: [... 21GB of data ...]
xorriso : UPDATE : 60 files added in 1 seconds
xorriso : UPDATE : Thank you for being patient. Working since 0 seconds.
xorriso : UPDATE : Thank you for being patient. Working since 1 seconds.
xorriso : UPDATE : Thank you for being patient. Working since 2 seconds.
xorriso : UPDATE : Thank you for being patient. Working since 3 seconds.
xorriso : UPDATE : Thank you for being patient. Working since 4 seconds.
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.4xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB
xorriso : UPDATE : Writing: 2640s 0.0% fifo 78% buf 28% 0.8xB
libisofs: MISHAP : Image write cancelled
libburn : FATAL : SCSI error on write(3600,16): [5 21 02] Invalid address
xorriso : FATAL : -abort_on 'FATAL' encountered 'FATAL' during image writing
xorriso : NOTE : libburn has now been urged to cancel its operation
libburn : WARNING : Last session on media is still open.
xorriso : FAILURE : libburn indicates failure with writing.
xorriso : aborting : -abort_on 'FATAL' encountered 'FATAL'
As usual there are no useful SCSI errors in the kernel messages. I
tried two times with similar results. I updated firmware of BDR-205 to
version 1.04, power cycled drive, then tried again with the same result.
Then out of exasperation I tried growisofs -Z /dev/sr1 -rJ -V"etc" . and
it gives me no problems except for the usual error in subject:
[...]
0.04% done, estimate finish Tue Feb 16 18:45:54 2010
0.09% done, estimate finish Tue Feb 16 19:04:38 2010
0.13% done, estimate finish Tue Feb 16 18:58:23 2010
/dev/sr1: pre-formatting blank BD-R for 24.8GB...
/dev/sr1: "Current Write Speed" is 10.2x4390KBps.
0.18% done, estimate finish Tue Feb 16 21:53:18 2010
0.22% done, estimate finish Tue Feb 16 21:30:45 2010
0.27% done, estimate finish Tue Feb 16 21:09:34 2010
0.31% done, estimate finish Tue Feb 16 20:59:43 2010
0.36% done, estimate finish Tue Feb 16 20:52:23 2010
[...]
The only thing that I have done since last successful xorriso BD-R burn is
burned a DVD+R-DL with wodim (failed) then with growisofs (success). But it
would seem that having power cycled the drive should make that issue
irrelevant.
Here is the dvd+rw-mediainfo from one failed disc, are these discs dead now?
INQUIRY: [PIONEER ][BD-RW BDR-205 ][1.03]
GET [CURRENT] CONFIGURATION:
Mounted Media: 41h, BD-R SRM
Media ID: PHILIP/R04
Current Write Speed: 10.0x4495=44950KB/s
Write Speed #0: 12.0x4495=53940KB/s
Write Speed #1: 10.0x4495=44950KB/s
Write Speed #2: 8.0x4495=35960KB/s
Write Speed #3: 6.0x4495=26970KB/s
Write Speed #4: 4.0x4495=17980KB/s
Write Speed #5: 2.0x4495=8990KB/s
Speed Descriptor#0: 00/12219391 R@10.0x4495=44950KB/s W@10.0x4495=44950KB/s
Speed Descriptor#1: 00/12219391 R@8.0x4495=35960KB/s W@8.0x4495=35960KB/s
Speed Descriptor#2: 00/12219391 R@6.0x4495=26970KB/s W@6.0x4495=26970KB/s
Speed Descriptor#3: 00/12219391 R@4.0x4495=17980KB/s W@4.0x4495=17980KB/s
Speed Descriptor#4: 00/12219391 R@2.0x4495=8990KB/s W@2.0x4495=8990KB/s
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 1
State of Last Session: incomplete
"Next" Track: 1
Number of Tracks: 2
READ TRACK INFORMATION[#1]:
Track State: partial incremental
Track Start Address: 0*2KB
Next Writable Address: 896*2KB
Free Blocks: 11243776*2KB
Track Size: 11244672*2KB
Last Recorded Address: 879*2KB
READ TRACK INFORMATION[#2]:
Track State: invisible incremental
Track Start Address: 11244672*2KB
Next Writable Address: 11244672*2KB
Free Blocks: 974720*2KB
Track Size: 974720*2KB
READ CAPACITY: 0*2048=0
And then a retry burn:
$ xorriso -dev /dev/sr1 -add * -- -commit_eject all
xorriso 0.4.8 : RockRidge filesystem manipulator, libburnia project.
libburn : WARNING : Last session on media is still open.
Only the output drive remains. Created empty ISO image.
Drive current: -outdev '/dev/sr1'
Media current: BD-R sequential recording
Media status : is written , is appendable
xorriso : FATAL : Cannot read ISO image tree
xorriso : HINT : You might get a partial or altered ISO image tree by option -error_behavior 'image_loading' 'best_effort' if -abort_on is set to be tolerant enough.
xorriso : aborting : -abort_on 'FATAL' encountered 'FATAL'
P.S. you can Cc: runderwo@mail.win.org to get around my mail server
issue for now.
--
Ryan C. Underwood, <nemesis@icequake.net>
Reply to: