growisofs won't write double layer DVDs
Hi,
I'm trying to write double layer DVDs on my TS-L632C DVD burner.
It has always handled single layer DVDs fine and this is the first
time I have a problem. What I get is this...
Executing 'mkisofs -dvd-video -V DVD /home/abc/dvd | builtin_dd of=/dev/sr0 obs=32k seek=0'
Setting input-charset to 'UTF-8' from locale.
0.17% done, estimate finish Thu Jan 1 13:43:04 2009
0.35% done, estimate finish Thu Jan 1 13:43:04 2009
0.52% done, estimate finish Thu Jan 1 13:43:04 2009
/dev/sr0: splitting layers at 1437552 blocks
:-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
dmesg tells me that my device is
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632C, AS07, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
dvd+rw-mediainfo gives me
INQUIRY: [TSSTcorp][CD/DVDW TS-L632C][AS07]
GET [CURRENT] CONFIGURATION:
:-( no media mounted, exiting...
christian@entropy ~ $ dvd+rw-mediainfo /dev/dvd
INQUIRY: [TSSTcorp][CD/DVDW TS-L632C][AS07]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Media ID: RITEK/S04
Current Write Speed: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 2.4x1385=3324KB/s@[0 -> 4173823]
Speed Descriptor#0: 00/4173823 R@2.4x1385=3324KB/s W@2.4x1385=3324KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
"Next" Track: 1
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 4173824*2KB
Track Size: 4173824*2KB
READ CAPACITY: 0*2048=0
The DVDs I use are made by TDK and I've tried more than one DVD.
One time I got the burner to do something different and give me
Executing 'mkisofs -dvd-video -V DVD /home/abc/dvd | builtin_dd of=/dev/sr0 obs=32k seek=0'
Setting input-charset to 'UTF-8' from locale.
0.17% done, estimate finish Thu Jan 1 13:50:11 2009
0.35% done, estimate finish Thu Jan 1 13:50:11 2009
0.52% done, estimate finish Thu Jan 1 13:47:00 2009
:-? L0 Data Zone Capacity is set already
/dev/sr0: "Current Write Speed" is 2.5x1352KBps.
:-[ WRITE@LBA=0h failed with SK=0h/ASC=00h/ACQ=02h]: Input/output error
:-( write failed: Input/output error
but that was only once out of a dozen tries.
Can anybody tell me what most likely the problem is here?
Is it the burner, the medium or just configuration that I could change?
It's a bit annoying to have a burner that's supposed to do double layer
but doesn't do it... :(
Cheers,
Christian
Reply to: