Hello, I'm trying to burn a DVD+RW with cdrecord and get a floating point exception. Can't make out what the error means. Thanks for any suggestions. Parker Platform Ubuntu 8.10 i386 ii wodim 9:1.1.6-1ubuntu6 command line CD/DVD writing tool $ cdrecord -v -dao speed=1 dev=/dev/dvd newworld.iso TOC Type: 1 = CD-ROM wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/dvd' devname: '/dev/dvd' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'GIGABYTE' Identification : 'GO-W1608A ' Revision : 'B8S2' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001A (DVD+RW) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) (current) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1602048 = 1564 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 12582912 = 12288 KB Track 01: data 4391 MB Total size: 5042 MB (499:36.68) = 2248251 sectors Lout start: 5043 MB (499:38/51) = 2248251 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 46853 Starting to write CD/DVD at speed 0.0 in real SAO mode for single session. Last chance to quit, starting real write i 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Starting new track at sector: 0 Track 01: 0 of 4391 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 10 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x10 (medium not formatted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s write track data: error after 0 bytes wodim: A write error occured. wodim: Please properly read the error message above. Writing time: 23.518s Average write speed 111.0x. Fixating... Floating point exception $ MSN NZ Travel Get inspired - dream, research, plan and book your next holiday online. |