Re: What does this error mean ?
On Wed, Dec 24, 2008 at 12:17:01PM +0100, Joerg Schilling wrote:
Hello again,
> You still did not send the ADIP info but the media has been written
> to, but it may be that only a writer will read it as it was not closed (fixated).
>
> The latter seems to be a problem of your drive....
Yes that should be it (or just the media...).
> Cdrecord did what is documented to write DVD-Rs and this did not change since
> cdrecord introduced DVD-R support in March 1998 nearly 11 years ago.
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
book type: DVD-R, Version 2.0x -> 2.1 (2.5)
disc size: 120mm (0)
maximum rate: Not specified (15)
number of layers:1
track path: Parallel Track Path (0)
layer type: Rewritable Area (2)
linear density: 0.267 µm/bit (0)
track density: 0.74 µm/track (0)
phys start: 196608 (0x30000)
phys end: 0
end layer 0: 0
bca: 0
phys size:... -196607
copyr prot type: 0
region mgt info: 0
last rma sector: 0
application code:64
physical code: 193
last rec address:16621272
part v./ext code:5/2
ind wr. power: 133
wavelength code: 13
write str. code: 0E 88 9A 80
Manufacturer: 'MCC 03RG20 '
rzone size: 40
rzone number: 1
border number: 1
ljrs: 0
track mode: 4 copy: 0
damage: 0
reserved track: 0 blank: 0 incremental: 1 fp: 0
data mode: 1
lra valid: 0
nwa valid: 1
rzone start: 0
next wr addr: 2211648
free blocks: 86240
blocking factor: 16
rzone size: 2297888
last recorded addr: 0
read compat lba: 0
Capacity Blklen/Sparesz. Format-type Type
2297888 2048 0x00 Unformated or Blank Media
2297888 2048 0x00 Reserved (0)
2297888 16 0x10 Reserved (0)
2297888 16 0x15 Reserved (0)
Sorry, I missunderstood your or better and only sent the second one :-)
--
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre
Reply to: