Re: cdrecord and "get performance" scsi errors
On 5/17/07, Thomas Schmitt <scdbackup@gmx.net> wrote:
> cdrskin/cdrskin -vvv dev=/dev/scd1 -atip
> cdrskin: scanning for devices ...
I presume you then pressed Ctrl+C.
Yes
To find out wether the problem is with the drive or with
the system, you could boot a system with kernel 2.6 and
check wether the errors of cdrecord and libburn persist.
For that purpose i would use the rescue system RIP Linux
http://www.tux.org/pub/people/kent-robotti/looplinux/rip/
Tried the above 2.6 based CD.
cdrskin:
-atip goes on ok without any error, maybe the only issue is that it
says "blank disk" while it was not blank.
cdrecord:
in place of every kernel 2.4 error I get a
resid: nn (where nn is a number which changes based on the 2.4 error)
So, for burning I get some
resid: 64
in place of get_performance errors
for -minfo I get (get perf, read disk info, read track info ....)
<normal cdrecord output>
resid: 64
<normal cdrecord output>
resid: 12
<normal cdrecord output>
resid: 64
<normal cdrecord output>
resid: 8
<normal cdrecord output>
resid: 12
<normal cdrecord output>
--
giulioo@pobox.com
Reply to: