Growisofs problem with SONY DRU 800

[Celso Tadao Suzuki <celso.suzuki@digitro.com.br>]

Hi,

I'm having problems to write a DVD with SONY DRU 800 with growisofs.
I get the following message.

Executing 'mkisofs -R -J -l -quiet -hide-rr-moved -V Teste /home2/DVD/Rascunho | builtin_dd of=/dev/cdrom obs=32k seek=0'
:-(  unable to PERFORM OPC: Input/output error

or

:-[  PERFORM OPC failed with SK=2h/ASC=04h/ACQ=01h]: No medium found

or

:-[  PERFORM OPC failed with SK=2h/ASC=04h/ACQ=01h]: No medium found

or

:-(  unable to PERFORM OPC: Input/output error



Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-800A '
Revision       : 'KY04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c        1.75 02/10/21 Copyright 1997 J. Schilling').
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD

And I got a lot of messages at dmesg


scsi : aborting command due to timeout : pid 264, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00 
hdd: irq timeout: status=0xd0 { Busy } 
hdd: DMA disabled
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy } 
hdd: ATAPI reset complete

hdd: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 271, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00
hdd: irq timeout: status=0xd0 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
hdd: status timeout: status=0xc0 { Busy }
hdd: drive not ready for command
hdd: ATAPI reset complete
scsi : aborting command due to timeout : pid 272, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00 
SCSI host 0 abort (pid 272) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 272) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdd: irq timeout: status=0xc0 { Busy }
hdd: ATAPI reset complete


I tested with 3 different midia. LG /TDK and MAXELL. With a MAXELL DVD-RW works fine, too.


If I change the driver to a SONY DRU710 every thing works fine.

Can someone help me, please ????

Thanks & Regards

Celso Suzuki
hdd: irq timeout: status=0xc0 { Busy }