Re: DVD+RL Problem
Ken Mandelberg <km@mathcs.emory.edu> wrote:
> Joerg Schilling wrote:
> > Ken Mandelberg <km@mathcs.emory.edu> wrote:
> >
> >> I'm trying to use growisofs to write a DVD+RL disk on Solaris 10/Sparc
> >> using a Plextor PX-740A. At first I was hopeful, there seemed to be no
> >> error in the write
> >
> > Did you use cdrecord-ProDVD?
> >
> > If you do not depend on being able to set the layer break manually,
> > it has been reported to work.
> >
> > Jörg
> >
>
> Yes, here's an example of two dummy cdrecord-ProDVD runs. One with
> DVD+RL and the other with DVD+R media. So cdrecord doesn't like the
> unknown media. Again growisofs sees the media as respectively
> Mounted Media: 2Bh, DVD+R Double Layer
> Mounted Media: 1Bh, DVD+R
>
> orac(3,177): cdrecord -dummy -sao -v dev=1,2,0 *iso
> Cdrecord-ProDVD-Clone 2.01b35 (sparc-sun-solaris2.8) Copyright (C)
> 1995-2004 J?rg Schilling
> Unlocked features: ProDVD Clone
> Limited features:
> This copy of cdrecord is licensed for:
> private/research/educational_non-commercial_use
> TOC Type: 1 = CD-ROM
> scsidev: '1,2,0'
> scsibus: 1 target: 2 lun: 0
> Warning: Using USCSI interface.
> Using libscg version 'schily-0.8'.
> SCSI buffer size: 64512
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 3
> Capabilities :
> Vendor_info : 'PLEXTOR '
> Identifikation : 'DVDR PX-740A '
> Revision : '1.01'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: Unknown
> Profile: Unknown (current)
> Profile: DVD+R
> Profile: DVD+RW
> Profile: Unknown
> Profile: Unknown
> Profile: DVD-RW sequential overwrite
> Profile: DVD-RW restricted overwrite
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Using generic SCSI-3/mmc-3 DVD+R/DVD+RW driver (checks media) (mmc_dvdplus).
> Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 688128 = 672 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 359 MB
> Total size: 359 MB = 184109 sectors
> Current Secsize: 2048
> cdrecord: Unspecified command not implemented for this drive.
> cdrecord: Cannot init drive.
This is a result of the fact that this old version of cdrecord does not know
about Dual layer profiles.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni)
schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Reply to: