Hi,
I'm having problems to write a DVD with SONY DRU 800 with growisofs.
I get the following message.
Executing 'mkisofs -R -J -l -quiet -hide-rr-moved -V Teste
/home2/DVD/Rascunho | builtin_dd of=/dev/cdrom obs=32k seek=0'
:-( unable to PERFORM OPC: Input/output error
or
:-[ PERFORM OPC failed with SK=2h/ASC=04h/ACQ=01h]: No medium found
or
:-[ PERFORM OPC failed with SK=2h/ASC=04h/ACQ=01h]: No medium found
or
:-( unable to PERFORM OPC: Input/output error
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-800A '
Revision : 'KY04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c
1.75 02/10/21 Copyright 1997 J. Schilling').
cdrecord: Found DVD media but DVD-R/DVD-RW support code is missing.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD
And I got a lot of messages at dmesg
scsi : aborting command due to timeout : pid 264, scsi0, channel 0, id
0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00 hdd: irq timeout:
status=0xd0 { Busy } hdd: DMA disabled
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy } hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 271, scsi0, channel 0, id
0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00
hdd: irq timeout: status=0xd0 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
hdd: status timeout: status=0xc0 { Busy }
hdd: drive not ready for command
hdd: ATAPI reset complete
scsi : aborting command due to timeout : pid 272, scsi0, channel 0, id
0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00 SCSI host 0 abort
(pid 272) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 272) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdd: irq timeout: status=0xc0 { Busy }
hdd: ATAPI reset complete
I tested with 3 different midia. LG /TDK and MAXELL. With a MAXELL
DVD-RW works fine, too.
If I change the driver to a SONY DRU710 every thing works fine.
Can someone help me, please ????
Thanks & Regards
Celso Suzuki