Re: What is the failure here when growisofs'ing a new disk?
David Bullock <db@dawnbreaks.net> wrote:
> I (David Bullock) wrote:
>
> >> Hi folks, I'm wondering if someone would characterise my growisofs
> >> problem for me, since I am not making much of the diagnostic output.
> >> What's going on here?
> >
>
> Then Rob Bogus (not the real Bob?) wrote:
>
> > My first thought is that your drive doesn't like these media. Is the
> > firmware at the current level?
>
>
>
> And J Porter Clark wrote:
>
> >What's your media? DVD-RW? If so, maybe it's the same problem
> >I'm having with the Plextor PX-716UF. Try fully blanking the
> >disk first
> >
>
> Sorry about the delay getting back to you folks. Further inspection
> reveals ...
>
> 1. media claims to be DVR-R. Attempts to blank it as suggested
> weren't successfull (unfortunately the log has scrolled back too far).
> 2. firmware is not up to date
> 3. I also have issues recording CD's with this drive
>
>
> At least I've got something to go on now - thanks.
>
> I'll try and fix #2 and #3, plus verify that the drive work on 'that
> other operating system' before posting further. Thanks for your help
> so far.
>
> cheers,
> David
>
>
> PS. FWIW, here's the fault exhibited when burning a CD with cdrecord.
>
> arwen# cdrecord dev=0,0,0 /mnt/freespace/isos/KNOPPIX_V3.8.1-2005-04-08-EN.iso
> cdrecord: No write mode specified.
> cdrecord: Asuming -tao mode.
> cdrecord: Future versions of cdrecord may have different drive dependent defaults.
> cdrecord: Continuing in 5 seconds...
> Cdrecord-Clone 2.01 (i386-unknown-freebsd4.9) Copyright (C) 1995-2004 Jörg Schilling
YOu need cdrecord-ProDVD in order to write a DVD.
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Using libscg version 'schily-0.8'.
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'PIONEER '
> Identifikation : 'DVD-RW DVR-105 '
> Revision : '1.30'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
> cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Starting to write CD/DVD at speed 16 in real TAO mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Turning BURN-Free off
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 00 01 B2 00 00 1F 00
> status: 0x0 (GOOD STATUS)
Do you still run a BSD kernel with the ATAPI SCSI sense data/status Bug?
If cdrecord does not get access to the needed data it cannot work.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni)
schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Reply to: