Problem with cdrecord-ProDVD
Hi all,
I noticed that -tao mode is no longer working on my hardware since
cdrecord-prodvd-2.01b31-i686-pc-linux-gnu
Everything worked fine with a previous version. Here is my system:
P3 933MHz running gentoo (current).
Linux bytecruncher 2.6.8-gentoo-r10 #1 Wed Oct 20 16:42:31 EDT 2004 i686
Pentium III (Coppermine) GenuineIntel GNU/Linux
* sys-libs/glibc
Latest version installed: 2.3.4.20040808-r1
gcc (GCC) 3.4.2 (Gentoo Linux 3.4.2-r2, ssp-3.4.1-1, pie-8.7.6.5)
hdc: LITE-ON DVDRW LDW-851S, ATAPI CD/DVD-ROM drive
bytecruncher sg # dvd+rw-mediainfo /dev/hdc
INQUIRY: [LITE-ON ][DVDRW LDW-851S ][GS0H]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Bh, DVD+R
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
Write Speed #1: 2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 0]
Speed Descriptor#0: 00/0 R@2.4x1385=3324KB/s W@4.0x1385=5540KB/s
Speed Descriptor#1: 00/0 R@2.4x1385=3324KB/s W@2.4x1385=3324KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: A1h, DVD+R book [revision 1]
Media ID: CMC MAG/F01
Legacy lead-out at: 2295104*2KB=4700372992
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 2295104*2KB
Track Size: 2295104*2KB
It is not likely to be a hardware/media problem. Both worked before with
following command, but not anymore
bytecruncher sg # mkisofs -J -r -D -udf SH104/|cdrecord-wrapper.sh
-dev=/dev/hdc -fs=16m -v -driveropts=burnfree -speed 4 -tao -v -
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jrg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Using libscg transport code version 'schily-scsi-linux-sg.c-1.83'
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW LDW-851S '
Revision : 'GS0H'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Drive current speed: 4
Drive default speed: 4
Drive max speed : 4
Selected speed : 4
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO
Drive buf size : 1602048 = 1564 KB
FIFO size : 16777216 = 16384 KB
cdrecord-ProDVD: Drive does not support TAO recording.
cdrecord-ProDVD: Illegal write mode for this drive.
It recorded proper, readable DVD+Rs with exactly the same command
on previous versions. Nothing else changed since than (it's running the
same kernel, the same glibc and gcc, and it's still an old session)
Tomasz
Reply to: