[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Sony DRU-700A gets errors writing ordinary CD.



Dear List,
Has anyone else had this happen writing a CD? It has happened to me a
couple of times so I think it may be real.
There has been no problem writing DVDs with growisofs. (dual layer not
tried).
I have copied below the messages from the cdrecord program
Linux version 2.6.7, Distribution Crux (i.e. no frills).
Using cdrtools. I have put cdrtools details at the end of this email/

Thanking you for your attention,
clare.

HERE is the cdrecord output:

root@kotto:/home/clare# cdrecord -v -dao speed=16 fs=16m dev=ATAPI:0,0,0
041001.iso
Cdrecord 2.00.3 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-700A '
Revision       : 'VY02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size      : 16777216 = 16384 KB
Track 01: data   275 MB
Total size:      316 MB (31:19.89) = 140992 sectors
Lout start:      316 MB (31:21/67) = 140992 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359848 (79:59/73)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 218856
Forcespeed is OFF.
Starting to write CD/DVD at speed 16 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...


Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    6 of  275 MB written (fifo  83%) [buf   5%]  12.4x.cdrecord:
Input/output erro
r. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 0C 5A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 09 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s

write track data: error after 6475776 bytes
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 09 00 00 00 00
Writing  time:   26.692s
Average write speed 103.2x.
Min drive buffer fill was 5%
Fixating...
Fixating time:    0.042s
cdrecord: fifo had 357 puts and 103 gets.
cdrecord: fifo was 0 times empty and 4 times full, min fill was 83%.

(END)

cdrtools version info:
name=cdrtools
version=2.00.3
release=2
source=(http://gd.tuwien.ac.at/utils/schilling/$name/$name-$version.tar.gz
\
        $name-$version.patch)
Patch is:
--- cdrtools-2.00.3/DEFAULTS/Defaults.linux     2003-02-16
01:01:48.000000000 +0100
+++ cdrtools-2.00.3-new/DEFAULTS/Defaults.linux 2004-05-02
10:48:48.621238424 +0200
@@ -18,7 +18,7 @@

###########################################################################
 CWARNOPTS=

-DEFINCDIRS=    $(SRCROOT)/include /usr/src/linux/include
+DEFINCDIRS=    $(SRCROOT)/include
 LDPATH=                -L/opt/schily/lib
 RUNPATH=       -R $(INS_BASE)/lib -R /opt/schily/lib -R $(OLIBSDIR)


-------------------------------------------------------------------------



Reply to: