DVD burning problem Plextor PX-708A using xcdroast cdrecord.prodvd
Dear All,
Has anyone got a Plextor PX-708A working under linux?
I followed the Thomas Chungs instructions on
http://www.xcdroast.org/ for using xcdroast with
cdrecord.ProDVD but without success. The plextor takes
both DVD-R and DVD+R. I tried dvd burning of a 4.2 GB
iso-image on DVD-R media, both as normal user and as
root (from 1x to 4x speed).
I guess the essential error is an illegal writing
request to the drive
Sense Key: 0x5 Illegal Request, Segment 0
Thanks in advance for any hints,
Martin
System: Redhat 8.0.
[martin@bugattix ~]$ more /etc/fstab | grep dvd
/dev/scd0 /mnt/dvd
iso9660 noauto,owner,kudzu,ro 0 0
[martin@bugattix ~]$ rpm -qa | grep cdr
xcdroast-0.98alpha15-1
cdrdao-1.1.5-10
cdrtools-mkisofs-2.00.3-1
cdrecord-ProDVD-2.01a27-1
cdrtools-cdda2wav-2.00.3-1
cdrtools-cdrecord-2.00.3-1
cdrtools-devel-2.00.3-1
[martin@bugattix ~]$ uname -a
Linux bugattix 2.4.20-20.8smp #1 SMP Mon Aug 18
14:19:07 EDT 2003 i686 athlon i386 GNU/Linux
[martin@bugatti ~]$ ls -l /usr/lib/xcdroast-0.98/bin/
total 472
-rwxr-xr-x 1 root root 30638 Oct 31
2003 cddbtool
lrwxrwxrwx 1 root root 41 Jun 1
15:03 cdrecord.prodvd ->
cdrecord-prodvd-2.01a27-i686-pc-linux-gnu
-rwxr-xr-x 1 root root 370360 Apr 17
16:33 cdrecord-prodvd-2.01a27-i686-pc-linux-gnu
-rwxr-xr-x 1 root root 457 Apr 15
15:11 cdrecord-wrapper.sh
-rwxr-xr-x 1 root root 2303 Apr 17
16:14 prodvd
-rwxr-xr-x 1 root root 6158 Oct 31
2003 rmtool
-rwxr-xr-x 1 root root 8282 Oct 31
2003 vrfytool
-rwxr-xr-x 1 root root 24805 Oct 31
2003 wavplay
-rwsr-xr-x 1 root root 13704 Oct 31
2003 xcdrwrap
[martin@bugattix ~]$ more .prodvd.conf
DVDRW_DEVICE=0,0,0
DVDRW_SPEED=4
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C)
1995-2002 J?rg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'PLEXTOR ' 'DVDR PX-708A '
'1.04' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Error report from xcdroast 0.98alpha15 with
cdrecord.dvd:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap
CDRECORDPRODVD dev= "0,0,0" gracetime=10 fs=4096k
driveropts=burnfree,noforcespeed,varirec=0 -v -useinfo
speed=4 -dao -dummy -eject -pad -overburn -data
"/tmp/martin/track-01.iso" ...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu)
Copyright (C) 1995-2004 J?rg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree,noforcespeed,varirec=0'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'DVDR PX-708A '
Revision : '1.04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-R sequential recording
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver
(mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1036288 = 1012 KB
FIFO size : 4194304 = 4096 KB
pregap1: -1
Track 01: data 4276 MB padsize: 30 KB
Total size: 4276 MB = 2189679 sectors
Current Secsize: 2048
WARNING: Phys disk size 2298496 differs from rzone
size 2297888! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 2495103
Blocks total: 2297888 Blocks current: 2297888 Blocks
remaining: 108209
Starting to write CD/DVD at speed 2 in dummy SAO mode
for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
cdrecord.prodvd: Input/output error. write_g1: scsi
sendcmd: no error
CDB: 2A 00 00 00 01 36 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00
00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.350s timeout 100s
cdrecord.prodvd: A write error occured.
cdrecord.prodvd: Please properly read the error
message above.
write track data: error after 634880 bytes
Writing time: 45.223s
Average write speed 71.6x.
Fixating...
Fixating time: 0.000s
cdrecord.prodvd: fifo had 74 puts and 11 gets.
cdrecord.prodvd: fifo was 0 times empty and 3 times
full, min fill was 90%.
Chat instantly with your online friends? Get the
FREE Yahoo! Messenger http://uk.messenger.yahoo.com/
Reply to: